YDOC-Berau

YDOC – Weather Station
ML325 - Data Logger
The ML-315 data logger is a small, ultra low power, cost effective data logger with built-in 3G-modem.
This small data logger, is further provided with an internal temperature sensor, 4GB micro SD card and an
2FF SIM card slot. The logger can be powered by an internal 3.6 Volt Lithium battery that will last for
years when the logger is configured in a lowpower mode. It is also possible to power the data logger
using an optional integrated 3xAA NiMH PV-panel or 8..30V external DC source.
The data logger can acquire physical signals by 2 current loop inputs, 2 voltage inputs, 1 potentiometer
input and 3 digital inputs. The data logger is provided with one serial port to capture measurements from
ASCII, MODBUS/RTU, NMEA or SDI-12 compatible sensors. External sensors can be powered by the
data logger itself, to prevent them to consume power while the data logger is a sleep. Up to 8
mathematical channels are available to calculate meaningful engineering values derived from sensor
input values (e.g. a polynomial to calculate a flow from a stream level).
Logged data can be pushed to a central host by HTTP, FTP, e-mail(SMTP) or secure TCP (CHAP) at
configurable intervals. Optionally logged data can be transmitted by satellite as well (Iridium SBD).
Features
• Cover with integrated 3.5" resistive touch color TFT display (320x240 pixels). The display is used
for displaying actual values and historical data as graphs up to 30 days,
• 2x current loop inputs : 4-20mA
• 2x serial ports for external serial sensors/transponders
o 1x RS-232 or RS-485 (ASCII, MODBUS/RTU, NMEA-183 or custom serial
o
Your Data Our Care
Sportmark 132
1355KJ ALMERE
The Netherlands
transponders )
1x RS-232 or SDI-12 (ASCII, MODBUS/RTU, SDI-12, NMEA-183 or custom serial
transponders)
• Internal sensors (a/o battery, processor temperature, signal strength)
• QUAD-band built-in 3G/GPRS-MODEM
• 4GB SD-CARD
• Power supply
o 8..30V DC-Adapter integrated in cover
• Data push by TCP, FTP, SMTP(e-mail) and HTTP/JSON 4)
• Alerts by SMS
Phone: +31.85.877.0290
E-mail: info@your-data-our-care.com

YDOC – Weather Station
• Configuration by:
o USB (local)
o
TCP (remote, in cooperation with the central data collector)
o Web-browser browser (remote, in combination with the yDocInsights webserver)
• Rugged and waterproof IP67 PA66/GF20 enclosure (130x120x75mm)
• Integrated GSM antenna, No eye-catchers for potential vandalism
• Wide temperature operating range –30°C +75°C
• Flexible mounting possibilities (wall/panel/pipe).
Sensors
MW 35 & 36
Reliable and professional wind sensors
The MW 35 and MW 36 are the Industrial wind sensors
with shock and vibration resistant and can also be used
at very low ambient temperatures. They are ideally suited
for application on top of wind turbines where shock and
vibration can be a problem.
ARG100 Precipitation Sensor
The ARG100 aerodynamic precipitation sensor (rain
gauge), manufactured by EML. A conventionally shaped
instrument interferes with the airflow around the sensor's
orifice so that the catch is reduced, and therefore
precipitation measurements are significantly
underestimated. The cost-effective ARG100 has been
scientifically designed and developed to minimise this
effect.
Your Data Our Care
Sportmark 132
1355KJ ALMERE
The Netherlands
Phone: +31.85.877.0290
E-mail: info@your-data-our-care.com

YDOC – Weather Station
Insights, Data Collecting Software
YDOC-Insights is an application to organize, view and visualize your data. You can organize your data by
location in a hierarchical-structured tree. You can define multiple 'tags' per location, which are used to
register measurements on (a/o a tag for registration a room temperature). 'Drag & Drop' can be used to
move 'tags' as well as locations to different positions in the hierarchical structure. Locations, tags,
instruments, etc. can be mapped on a background picture to create control panels/dashboards and/or
graphic navigation. Data can be printed saved and emailed in graphical (*.jpg) , tabular (*.xls) and report
(*.html) form. YDOC-Insights comes with an integrated 'Data Collector' for YDOC loggers.
Features
• Map locations, tags, instruments on bitmap pictures to create control panels/dashboards and/or
graphic navigation
• View recent values per location
• View summary values per location (min., max., avg., count, quantity and std. dev.)
• View measurements in tabular form
• View measurements in graphical form
Minimum System requirements
• Microsoft Windows 2003, 2008, XP or W7
• Display resolution 1024x768 or higher
• Mouse or other pointing device
• Microsoft Internet Explorer 8
• Microsoft Internet Explorer 9 to use Canvas graphics
• (optional) GoogleEarth 4.0
• MS-Access (default)
• SQL-Server
• Oracle 11g
Supported database systems
Your Data Our Care
Sportmark 132
1355KJ ALMERE
The Netherlands
Phone: +31.85.877.0290
E-mail: info@your-data-our-care.com

YDOC – Weather Station
Accessories :
Mast : Aluminium, triangle, self supporting, 10 m height
Enclosure : White painted aluminium plate with sealed door
Solar Panel : 30Wpp and 12V 17 Ah battery
Desktop computer
Lenovo, all in one PC model E93Z or equal with Windows 10 OS
Your Data Our Care
Sportmark 132
1355KJ ALMERE
The Netherlands
Phone: +31.85.877.0290
E-mail: info@your-data-our-care.com

MW 35 ANEMOMETER
For professional, reliable wind speed measurement
Highly reliable universal wind sensors
Designed for industrial applications
Wide range of outputs
Shock and vibration proof
All-weather resistant
Mierij Meteo MW 35 Anemometer is specifically developed for industrial applications, and enables you the fastest,
reliable wind speed measurement in various situations. MW 35 is a heavy duty, robust and accurate sensor
protected against static discharge and can be mounted using ¾ inch gas thread. It is fitted with a magnetic encoder
and has no electro-mechanical parts. Also, an embedded heater keeps the sensor ice-free down to at least -40°C.
Wind speed up to 75m/s can be measured. MW 35 is compatible with a wide range of data acquisition systems,
and internal micro controller enables you a number of universal industrial outputs. MW 35 is supplied with 5
meter of signal/ power cable and operates on 12-24 VDC.
Installation Examples
Options/Accessories
*
1
*
MW 35
Users
2
1
MW 36 Wind Vane
3
2
MW 83 Mounting Bracket,
Industrial Class
3
MU 32
Electronics Unit/ datalogger

TECHNICAL SPECIFICATION: MW 35
Operating Range
Resolution
Starting Speed
Maximum Wind Load
Inaccuracy
Analogue output
Frequency output
(NPN/PNP)
PERFORMANCE
0 - 75 m/s
Better than 0.1 m/s
< 0.8 m/s
80 m/s
< 0.5 m-s (from 0 to 50 m/s)
0 – 10 V or 4 .. 20 mA
0 .. 100 Hz / 0 .. 750 Hz / 0 .. 1000 Hz
Serial output RS-485 (NMEA 0183)
PHYSICAL
Size
Housing ø43mm
Weight
0.8 kg
Material
Stainless Steel / anodized aluminium / ABS / polyamide
Operating Conditions - 40 °C to + 60 °C
(The heater ensures operation to -40 °C in icing
conditions)
ELECTRICAL
Power Supply
10.8 to 30 VDC
Sensor Consumption
with 4-20 mA output
35 mA @ 12 VDC / 30 mA @ 24 VDC
with other outputs
15 mA @ 12 VDC / 10 mA @ 24 VDC
Heater Consumption
50 W @ 24 VDC only

MW 36 WIND VANE
For accurate, professional wind direction measurement
Highly reliable universal wind sensors
Designed for industrial applications
Wide range of outputs
Shock and vibration proof
All-weather resistant
Mierij Meteo MW 36 Wind Vane is specifically developed for industrial applications, and enables you the fastest,
reliable wind direction measurement in various situations. MW 36 is a heavy duty, robust and accurate sensor
protected against static discharge and can be mounted using ¾ inch gas thread. It is fitted with a magnetic encoder
and has no electro-mechanical parts. Also, an embedded heater keeps the sensor ice-free down to at least -40°C.
MW 36 is compatible with a wide range of data acquisition systems, and internal micro controller enables you a
number of universal industrial outputs. MW 36 is supplied with 5 meter of signal/ power cable and operates on
12-24 VDC.
Installation Examples
Options/Accessories
Users
1
*
*
MW 36
2
1
MW 35 Anemometer
3
2
MW 83 Mounting Bracket,
Industrial Class
3
MU 32
Electronics Unit/ datalogger
-

TECHNICAL SPECIFICATION: MW 36
PERFORMANCE
Operating Range 0 - 360 °
Resolution
8 bit / 1.4 ° (internally)
Starting Speed
< 0.8 m/s
Maximum Wind Load
80 m/s
Inaccuracy < 3 °
Size:
Weight:
PHYSICAL
270 x 270 x ø43 mm (without cable)
0.8 kg
Power Supply
Sensor Consumption
with 4-20 mA output
with other outputs
ELECTRICAL
10.8 to 30 VDC
35 mA @ 12 VDC / 30 mA @ 24 VDC
15 mA @ 12 VDC / 10 mA @ 24 VDC
-

AERODYNAMIC RAIN GAUGE ARG100
The cost effective ARG100 aerodynamic “tipping bucket” rain gauge has been
designed to minimise the established effect of wind on reducing rainfall catch.
The benefit of this is more accurate rainfall measurements compared to
conventionally shaped rain gauges which catch less than the ARG100.
The unique shape of the ARG100 was designed by the UK Institute of
Hydrology, this is an assurance of its quality.
EML manufacture and assemble this product in the UK and it is put through
rigorous calibration procedures. The result of this process is a very rugged
instrument, calibrated with precision, and capable of consistently recording
accurate measurements in the field.
The ARG100 is compatible with all data capture methods including
dataloggers and event recorders. If required, EML can also supply a small
data logger which fits in a recess within the body of the gauge.

TECHNICAL SPECIFICATIONS
Funnel Diameter
Funnel Rim Height
Tip Sensitivity
Output
Power
requirements
Maximum
allowable
current through
reed
Weight
: 254mm (10.0 inches)
: 340mm (13.4 inches)
: Standard setting 0.20mm of rain per tip; other setting 0.25mm, if
required.
: Contact closure.
: None.
: 300 mA; non inductive.
: 1000 gms.
ORDERING INFORMATION
ARG100 Standard aerodynamic gauge. No plug fitted
ARG100/DT2 As above plus fitted plug to suit DT2-R data logger.
ARG100/EC Aerodynamic gauge fitted with 6 metres of twisted pair cable. Suitable
for AWS use.
ARG100/EC Other cable lengths are available. Please contact sales for more details.
.
- .