Fairview Fittings

More documents

Recommendations

Info

POLYETHYLENE MECHANICAL FITTINGS and RISERS COPPERSERT COPPER to PE TRANSITION COUPLING SDR / Copper PART No. SIZE Wall Size Material PF-41013 1/2" CTS .090" 1/2" O.D. PE4710 / PE3408 TRANSITION FITTINGS: Provide a quick solution for transition from iron pipe to polyethylene pipe or tube. SDR/ PART No. DESCRIPTION SIZE Wall Material PF-700205 Transition, Threaded 3/4" IPS X 1/2" CTS .090" 2306 / 2406 PF-700802 Transition, Threaded 3/4" IPS SDR 11 2306 / 2406 ELBOWS: To be use where tight 90 degree turns are required. SDR / PART No. SIZE Wall Material PF-50636 1" IPS SDR11 PE4710 / PE3408 PF-50325010 1-1/4" IPS SDR 9.3 PE4710 / PE3408 THREE WAY TEES: To branch off to same size tube or pipe. SDR / PART No. SIZE Wall Material PF-50199 1/2" CTS .090" PE4710 / PE3408 PF-50929 3/4" IPS SDR11 PE4710 / PE3408 PF-50292 1" CTS .099" / .103" PE4710 / PE3408 PF-50634 1" IPS SDR11 PE4710 / PE3408 PF-50327010 1-1/4" IPS SDR 9.3 PE4710 / PE3408 PF-50316 2" IPS SDR11 PE4710 / PE3408 I REDUCING TEES: To branch off to a reduced tube or pipe size. SDR/ SDR/ SDR/ PART No. SIZE Wall SIZE Wall SIZE Wall Material PF-50461 3/4" IPS SDR11 3/4" IPS SDR11 1/2" CTS .090" PE4710 / PE3408 PF-50451 1" CTS .099"/.103" 1" CTS .099"/.103" 1/2" CTS .090" PE4710 / PE3408 PF-50328100 1-1/4" IPS SDR 9.3 1-1/4" IPS SDR10 1" CTS .099"/.103" PE4710 / PE3408 PF-51323100 2" IPS SDR11 2" IPS SDR11 1-1/4" IPS SDR9.3 PE4710 / PE3408 218
POLYETHYLENE MECHANICAL FITTINGS and RISERS MECHANICAL TAPPING TEES: The exclusive Perfection PermaLock Mechanical Tapping Tee provides a simple gas-tight, non-heat fusion polyethylene service line connection on new and existing polyethylene mains. It actually uses the inside diameter of the main itself to create a permanent gas-tight seal. The tee can be installed in as little as five minutes using only a socket set and two Allen wrenches regardless of weather conditions. There are no special tools, heating or auxiliary power requirements. There is no need to shut down the main during installation. Here’s how the Perfection PermaLock Mechanical Tapping Tee uses the inside diameter of the main to achieve a permanent gastight seal: as the valve assembly is threaded into the tee tower it punches the main and drives the locking flange of the valve assembly through the punched hole; when the valve is threaded upward the tee is securely locked and sealed onto the main by the retaining flange on the valve assembly; the Perfection PermaLock Mechanical Tapping Tee is now permanently locked onto the main. MECHANICAL TAPPING TEES: PERMASERT SDR / PART No. MAIN SIZE OUTLET Wall CUTTER Material PF-55951 2" IPS 1" IPS SDR11 .80 CUT PE4710 / PE3408 ANODELESS RISERS: (PERMASERT MECHANICAL END) Perfection risers provide extra safety due to the strong schedule 40 steel pipe used as the outside casing. Because of the factory installed epoxy coating the risers do not require cathodic protection devices to ward off underground corrosion. Each riser is tested to withstand a minimum of 150 P.S.I. and meet D.O.T. regulation 192 for residential and commercial L.P. or natural gas service. The above ground portion has an N.P.T. end for convenient connections to a fitting, meter or regulator. There is a unique pressure seal which locks the PE tube / pipe on the inside of the riser giving the strength to allow a pull to destruction test. The underground portion comes with a threaded moisture seal for protection along with the factory installed PERMASERT coupling. * Special lengths, shapes, seals and fusion connections are available upon request. ANODELESS RISERS: (PERMASERT MECHANICAL END) STEEL PIPE PERMASERT SDR / PART No. CONNECTION COUPLING Wall VERTICAL HORIZONTAL PF-77205 1/2" IPS 1/2" CTS .090" 18" 18" PF-77253 1/2" IPS 1/2" CTS .090" 30" 24" PF-77181 3/4" IPS 1/2" CTS .090" 30" 24" PF-79354 3/4" IPS 3/4" IPS SDR11 30" 24" PF-77120 3/4" IPS 1" CTS .099" / .103" 30" 24" PF-79350 1" IPS 1" IPS SDR11 30" 24" PF-75901 1-1/4" IPS 1-1/4" IPS SDR 9.3 30" 24" PF-79784 1-1/2 IPS 1-1/2 IPS SDR 11 32" 29" PF-75906 2" IPS 2" IPS SDR11 30" 15" I 219
Page 3 and 4:
TABLE OF CONTENTS SECTION A FITTING
Page 5 and 6:
FITTINGS BRASS - STEEL - NYLON - BL
Page 7 and 8:
BRASS S.A.E. 45° FLARE CONNECTOR T
Page 9 and 10:
R.V. FIELD KIT Designed for Recreat
Page 11 and 12:
BRASS S.A.E. 45° INVERTED FLARE CO
Page 13 and 14:
AUTOMOTIVE FITTINGS BRASS AIR SHIFT
Page 15 and 16:
BRASS COMPRESSION FITTINGS CONNECTO
Page 17 and 18:
COMPRESSION FITTINGS FOR POLY TUBE
Page 19 and 20:
NYLON FITTINGS FOR POLY TUBE (COMPL
Page 21 and 22:
BRASS PUSH-TO-CONNECT FITTINGS •
Page 23 and 24:
BRASS PIPE FITTINGS COUPLING (Cast
Page 25 and 26:
BRASS PIPE FITTINGS 45° ELBOW (Cas
Page 27 and 28:
BLACK IRON PIPE FITTINGS SCHEDULE 4
Page 29 and 30:
BRASS D.O.T. AIR BRAKE FITTINGS (FO
Page 31 and 32:
BRASS PUSH-TO-CONNECT D.O.T. AIR BR
Page 33 and 34:
FIELD KITS AIR BRAKE HOSE MENDER KI
Page 35 and 36:
WATER HOSE FITTINGS AND ACCESSORIES
Page 37 and 38:
PROPANE GAS FITTINGS CONNECTOR INVE
Page 39 and 40:
PROPANE GAS TEE FITTINGS DUAL TANK
Page 41 and 42:
L.P.G. ADAPTERS, CONNECTORS AND VAL
Page 43 and 44:
BRASS WELDING FITTINGS HOSE NUT OXY
Page 45 and 46:
OPERATING AND BURST PRESSURES OF HY
Page 47 and 48:
STEEL 37° J.I.C. FLARE ADAPTERS SL
Page 49 and 50:
STEEL 37° J.I.C. FLARE ADAPTERS 45
Page 51 and 52:
STEEL S.A.E. O-RING BOSS ADAPTERS (
Page 53 and 54:
STEEL O-RING FACE SEAL ADAPTERS (BU
Page 55 and 56:
STEEL S.A.E. PIPE ADAPTERS COUPLING
Page 57 and 58:
STEEL S.A.E. PIPE ADAPTERS TEE Fema
Page 59 and 60:
• Lead Free PEX Fittings . . . .
Page 61 and 62:
HOSE BARB FITTINGS SPLICER Hose Bar
Page 63 and 64:
BRASS GRIP-TITE HOSE FITTINGS (USE
Page 65 and 66:
PLASTIC PEX FITTINGS (ASTM F877,AST
Page 67 and 68:
BRASS RING-BARB FITTINGS FOR POLY T
Page 69 and 70:
STEEL ONE PIECE CRIMP HOSE ENDS (CO
Page 71 and 72:
STEEL ONE PIECE CRIMP HOSE ENDS (BI
Page 73 and 74:
STEEL ONE PIECE CRIMP HOSE ENDS (BI
Page 75 and 76:
STEEL REUSABLE HOSE ENDS FOR USE WI
Page 77 and 78:
STEEL CRIMP HOSE ENDS FOR USE WITH
Page 79 and 80:
Synflex ® PERMANENTLY ATTACHED HOS
Page 81 and 82:
SWAGE / PUSHER CHART FOR SYNFLEX EN
Page 83 and 84:
• HAB Live Swivel Assemblies . .P
Page 85 and 86:
MULTI-PURPOSE RUBBER HOSE ACCUTEK F
Page 87 and 88:
SUPERFLEX HOSE ACCUTEK Fluid and Ai
Page 89 and 90:
QUALITY P.V.C. HOSE ACCUTEK Fluid a
Page 91 and 92:
AIR HOSE ASSEMBLIES CO-POLYMER SELF
Page 93 and 94:
INDUSTRIAL WATER HOSE ASSEMBLIES
Page 95 and 96:
BULK PRESSURE WASH HOSE (4000 P.S.I
Page 97 and 98:
PRESSURE WASH HOSE ASSEMBLIES KARCH
Page 99 and 100:
CRIMPED AIR BRAKE ASSEMBLIES D.O.T.
Page 101 and 102:
BULKHEAD AND SLIDER HOSE ASSEMBLIES
Page 103 and 104:
S.A.E. HYDRAULIC / TRUCK HOSE For m
Page 105 and 106:
STAINLESS STEEL BRAIDED PTFE HOSE (
Page 107 and 108:
RUBBER HEATER HOSE PREMIUM RED RUBB
Page 109 and 110:
SPECIALTY HOSE ASSEMBLIES NYLON GRE
Page 111 and 112:
S.A.E. HYDRAULIC HOSE MEDIUM PRESSU
Page 113 and 114:
S.A.E. HYDRAULIC HOSE MEDIUM PRESSU
Page 115 and 116:
ORDERING HYDRAULIC HOSE ASSEMBLIES
Page 117 and 118:
Synflex ® PART NUMBER LEGEND STAND
Page 119 and 120:
Synflex ® HOSE 3130 MEDIUM PRESSUR
Page 121 and 122:
Synflex ® HOSE 3R80 HIGH PRESSURE
Page 123 and 124:
Synflex ® HOSE Spectra 30CT CONSTA
Page 125 and 126:
Synflex ® HOSE 3VE0 Non-Conductive
Page 127 and 128:
U.L. / C.S.A. APPROVED TYPE I PROPA
Page 129 and 130:
U.L. / C.S.A. APPROVED TYPE I PROPA
Page 131 and 132:
PROPANE GAS RECREATIONAL VEHICLE AS
Page 133 and 134:
NATURAL GAS GRILL / BARBECUE HOSE A
Page 135 and 136:
CSA APPROVED TYPE II PROPANE & NATU
Page 137 and 138:
STAINLESS STEEL GAS CONNECTORS (Sta
Page 139 and 140:
STAINLESS STEEL GAS CONNECTORS (Mov
Page 141 and 142:
CYLINDERS AND TANK EQUIPMENT PIGTAI
Page 143 and 144:
POLY BRAIDED HOSE GENERAL USE P.V.C
Page 145 and 146:
TUBE ALUMINUM - COPPER - NYLON - PO
Page 147 and 148:
NYLON TUBE 100 FT Coils Nylon tube
Page 149 and 150:
POLYETHYLENE TUBE 360- YEL ORA RED
Page 151 and 152:
COPPER NATURAL GAS / LP GAS SERVICE
Page 153 and 154:
CLAMPS & TUBE STRAPS STEEL - COPPER
Page 155 and 156:
CLAMPS T-BOLT HOSE CLAMPS For T-Bol
Page 157 and 158:
CLAMPS QUICK RELEASE CLAMPS APPLICA
Page 159 and 160:
OETIKER/TST TO FAIRVIEW CONVERSION
Page 161 and 162:
TUBE STRAPS AND HANGERS RUBBER CUSH
Page 163 and 164:
• Lead Free Brass Valves and Shut
Page 165 and 166:
BALL VALVES MINIATURE BALL VALVES
Page 167 and 168:
C.S.A. CERTIFIED FORGED BRASS BALL
Page 169 and 170:
BRASS PRECISION NEEDLE VALVES C.S.A
Page 171 and 172:
UTILITY VALVES GATE VALVES ANGLE VA
Page 173 and 174: SHUT-OFF COCKS BRASS SPRING BOTTOM
Page 175 and 176: DRAIN COCKS AND VALVES BACK SEATING
Page 177 and 178: CHECK VALVES This check valve desig
Page 179 and 180: • Chrome Plated Miniature High Ca
Page 181 and 182: HYDRAULIC QUICK DISCONNECT COUPLING
Page 189 and 190: PNEUMATIC COUPLINGS INDUSTRIAL INTE
Page 191 and 192: PNEUMATIC COUPLINGS ARO210 / ARO310
Page 193 and 194: PNEUMATIC SWING COUPLINGS INDUSTRIA
Page 195 and 196: WATER / PRESSURE WASH COUPLINGS STR
Page 197 and 198: PRESSURE GAUGES DRY - LIQUID DRY .
Page 199 and 200: LIQUID FILLED PRESSURE GAUGES • L
Page 201 and 202: DRY PRESSURE GAUGES • Dry Gauge
Page 203 and 204: GAS CONTROL COMPONENTS INDUSTRIAL -
Page 205 and 206: DOMESTIC APPLICATION REGULATORS HIG
Page 207 and 208: RECREATIONAL VEHICLE (RV) LP-GAS RE
Page 209 and 210: GAS GRILL (BARBECUE) LP-GAS REGULAT
Page 211 and 212: INDUSTRIAL APPLICATION REGULATORS H
Page 213 and 214: BARBECUE / GAS APPLIANCE OUTLETS AN
Page 215 and 216: BARBECUE / GAS APPLIANCE OUTLETS AN
Page 217 and 218: TracPipe ® FLEXIBLE GAS PIPING The
Page 219 and 220: TracPipe ® FLEXIBLE GAS PIPING AUT
Page 221 and 222: POLYETHYLENE MECHANICAL FITTINGS an
Page 223: POLYETHYLENE MECHANICAL FITTINGS an
Page 227 and 228: POLYETHYLENE MECHANICAL FITTINGS an
Page 229 and 230: NATURAL GAS SIZING TABLES FOR PE PI
Page 231 and 232: FORKLIFT L.P. PRODUCTS TE-PRV-E INT
Page 233 and 234: CYLINDERS AND TANK EQUIPMENT LIFT T
Page 235 and 236: TOOLS & ACCESSORIES CRIMP - CUT - F
Page 237 and 238: PROPANE TORCHES CONSTRUCTION: Cast
Page 239 and 240: PROPANE TORCH KITS PART No. I4C180F
Page 241 and 242: GAS ORIFICE GAUGING DRILLS DRILL AN
Page 243 and 244: AIR GUNS LEVER HANDLE TYPE WITH HOO
Page 245 and 246: INDUSTRIAL WATER NOZZLES Removable
Page 247 and 248: TOOLS HAND-HELD HOSE CUTTER SEPARAT
Page 249 and 250: THREAD SEALANTS U.L. & U.L.C. LISTE
Page 251 and 252: HOSE ACCESSORIES HOSE CUT-OFF BLADE
Page 253 and 254: CABINETS & DISPLAY UNITS STAND-ALON
Page 255 and 256: Fairview Fitting Center PART No. XC
Page 257 and 258: Counter / Wall Mounting Bin Cabinet
Page 259 and 260: START-UP INDUSTRY PRODUCT ASSORTMEN
Page 261 and 262: PRODUCT DISPLAY RACK FEATURES: Fair
Page 263 and 264: FAIRVIEW PACKAGED PRODUCT Featured
Page 265 and 266: GAS PRODUCT SELECTIONS WITH DISPLAY
Page 267 and 268: HOSE ASSEMBLY DISPLAY RACK KITS PNE
Page 269 and 270: HYDRAULIC CRIMPER COMPATIBILITY CHA
Page 271 and 272: SIZE CHARTS ACTUAL OUTSIDE DIAMETER
Page 273 and 274: ACS SERIES Appliance Connectors Pg.
Page 275 and 276:
INDEX SERIES PAGE SERIES PAGE SERIE
show all

Fairview Fittings

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?