Proto - Catalogue complet

Impact Sockets
About Power SOckets
VERY DIFFERENT SOCKETS FOR VERY DIFFERENT PURPOSES
Power sockets are designed for power nut runners,
multi-spindle machines and angle head nut drivers,
which are low impact power tools. Even though
the power sockets are offered in a black finish,
they are not compatible with impact tools.
1/4" Drive High Strength Magnetic Power Sockets - 6 Point
> > ProtoGrip Magnetic Sockets use high strength magnets made from a rare
earth magnet alloy/nylon blend.
> > ProtoGrip Magnetic Sockets require no bushings to hold the magnet
in place. Allows room for more magnet material, helping increase total
magnetic strength.
> > Designed to easily pick up heavy fasteners and hold them tightly during use.
> > Strong magnetic hold helps increase efficiency when installing fasteners in
awkward or hard-to-reach locations.
> > Size stamped on tool for easy identification.
Power sockets are heat-treated to a higher
hardness than either impact or hand sockets. This
high hardness is ideal for long wear on assembly
lines, but their brittleness makes them vulnerable
to shattering when fitted to an impact wrench.
L
B
A
D
E
1/4" Drive Power Sockets
C
Nut End Outside Drive End Outside Nut Depth
Overall
INCH 6
Diameter (in) (B) Diameter (in) (C) (in) (D) Length (in) (L) Weight (lbs)
3/16 J6906PF 5/16 1/2 5/32 7/8 0.03
1/4 J6908PF 25/64 1/2 11/64 7/8 0.03
5/16 J6910PF 1/2 1/2 13/64 15/16 0.04
11/32 J6911PF 33/64 33/64 7/32 15/16 0.04
3/8 J6912PF 9/16 9/16 15/64 15/16 0.05
7/16 J6914PF 21/32 21/32 1/4 1 0.07
1/2 J6916PF 11/16 11/16 1/4 1 0.08
7 ASME B107.2
Nut End Outside Drive End Outside Nut Depth
Overall
MM 6
Diameter (in) (B) Diameter (in) (C) (in) (D) Length (in) (L) Weight (lbs)
5 J6905MPF 5/16 1/2 5/32 7/8 0.03
5.5 J69055MPF 23/64 1/2 5/32 7/8 0.03
6 J6906MPF 25/64 1/2 11/64 7/8 0.03
7 J6907MPF 7/16 1/2 11/64 15/16 0.04
8 J6908MPF 1/2 1/2 11/64 15/16 0.04
9 J6909MPF 33/64 33/64 13/64 15/16 0.04
10 J6910MPF 9/16 9/16 7/32 15/16 0.05
11 J6911MPF 5/8 5/8 17/64 1 0.06
12 J6912MPF 11/16 11/16 9/32 1 0.08
13 J6913MPF 47/64 47/64 19/64 1 0.09
7 ASME B107.33M
Locking Adapter (Male to Male)
Product #: J4759BL
Overall
Product # Drive Size (in) Finish Length (in) Weight (lbs)
J4759BL 1/4 Black Oxide 2-1/2 0.07
7
4 4 POINT 6 6 POINT 8 8 POINT 12 12 POINT SPL SPLINE TORX ®
Torx ® hex HEX
BLACK OXIDE
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES. 555
+1.800.800.TOOL · Fax: +1.770.648.9108​ · www.protoindustrial.com