Renold - Chain Catalogue
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Renold</strong> Transmission <strong>Chain</strong> <strong>Catalogue</strong> I 79<br />
Rivet Extractors and <strong>Chain</strong> Lubricant<br />
For chain breaking<br />
Screw operated extractors break chain by<br />
forcing the <strong>Renold</strong> end softened bearing pins<br />
out of the outer link plates.<br />
For other brands of chain the rivet swell must<br />
first be ground away.<br />
Section 1<br />
Part No. 10101<br />
For use with chains:<br />
9.525 mm/0.375" to 15.875 mm/0.625".<br />
BS and ANSI Series.<br />
Part No. 10102<br />
For use with chains:<br />
19.05 mm/0.75" to 31.75 mm/1.25" BS Series.<br />
19.05 mm/0.75" to 25.4 mm/1" ANSI Series.<br />
<strong>Chain</strong> lubricant<br />
<strong>Renold</strong> <strong>Chain</strong> Lubricant has been specially<br />
formulated to ensure positive lubrication and<br />
protection to all working surfaces of the chain<br />
drive. It is fast penetrating, does not drip or<br />
fling, and is ideal for quick and easy application,<br />
particularly on open chain drives where normal<br />
lubrication is not possible.<br />
• Fast positive penetration<br />
• Does not drip or drain away<br />
• Resists centrifugal flinging<br />
• Longer chain life<br />
Part No. 611124<br />
For use on 'open' chain drives.