Waterborne_FloorFinishCare
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance<br />
Weekly<br />
Using the Pallmann Hardwood Floor Dusting Pad, lightly dust the<br />
floor to remove large debris. A vacuum may also be used for large<br />
areas. The Pallmann Hardwood Floor Cleaner may be used with<br />
the Pallmann Microfiber Pad on a weekly basis or as needed to<br />
thoroughly clean your floors. Clean stubborn spots, spills, and<br />
shoe marks by spraying the Hardwood Floor Cleaner directly on<br />
the areas.<br />
Monthly<br />
Inspect protector pads on furniture and ensure that all walk off<br />
mats are in proper locations. Also, visually inspect the wood<br />
floor for traffic patterns that may be present. If a traffic pattern is<br />
noticeable, it may be time to consult a wood flooring professional<br />
to discuss recoating your wood floors.<br />
Yearly<br />
Contact a professional hardwood flooring contractor to deep<br />
clean your wood floors using the Pallmann Clean Strong product<br />
once a year. Over time, accumulation of every day residues such<br />
as oils, grease, and dirt will occur on the hardwood floor. These<br />
residues will act as an abrasive which may cause premature finish<br />
wear. The Pallmann Clean Strong product is a professional<br />
product that should only be used by a professional hardwood<br />
flooring contractor.<br />
Several Years Later<br />
A new coat of finish may need to be applied to your wood floor<br />
several years after the initial application. This will ensure that you<br />
do not wear down the current finish to bare wood, causing expensive<br />
sanding procedures. Compared to re-sanding, re-coating is<br />
an inexpensive procedure that often can be completed in one<br />
day with little to no dust in the home. We recommend using our<br />
dustless recoating products—Pall-X Bond with our Pall-X 96 or<br />
Pall-X 98 waterborne finishes.<br />
PALLMANN | A Brand of UFLOOR Systems Inc.<br />
14509 E. 33rd Place, Unit G | Aurora, CO 80011<br />
Phone: 720.374.4810 | Fax: 720.374.2113<br />
info@pallmann.us | pallmann.us
Who is Pallmann?<br />
Choosing the P erfect Sealer<br />
Choosing the P erfect Finish<br />
115 Years of Quality Innovation<br />
Front cover:<br />
Savannah Neighborhood Clubhouse in<br />
Dallas, Texas featuring Pall-X 98 finish.<br />
Since 1900 Pallmann has been using the latest technology<br />
available in the wood floor finish market. Pallmann is<br />
consistently striving to produce the next generation of<br />
waterborne finishes that meet or exceed environmental<br />
standards, in addition to providing the protection<br />
homeowners demand for their wood floors. After testing<br />
these standards, we then take the manufacturing process<br />
one step further. We combine our German Engineering<br />
with American Technical Expertise to give you,<br />
the homeowner, and your contractor the very best<br />
waterborne finish system for your project.<br />
By choosing Pallmann to protect your wood floors, you can<br />
be confident that your new finish will look great for years to<br />
come. Pallmann’s references include providing finishes for<br />
projects ranging from grand ballrooms in the French Alps<br />
to local coffee shops in Colorado. Our finishes are shipped<br />
from our facility in Wurzburg, Germany, and are equipped<br />
with 115 years of history and expertise, giving you the<br />
assurance and confidence to trust Pallmann on your wood<br />
flooring project.<br />
Pall-X Color Sealer<br />
Pall-X Color is a single component waterborne sealer that seals raw or<br />
statined wood in addition to adding a layer of protection to your floor.<br />
Pall-X Color’s unique formula reacts with most wood species to bring<br />
out the warm rich tones of the wood. This sealer is recommended to<br />
enhance the vibrancy and depth of the stain color. (Note: do not use<br />
over white or pastel stains.)<br />
Pall-X 325 Sealer<br />
Pall-X 325 is a single component waterborne sealer that seals raw or<br />
stained wood in addition to adding a layer of protection to your floor.<br />
Pall-X 325 is ideal when a clear, light tone appearance is desired. This<br />
sealer is recommended when a white or pastel stain is used prior to<br />
application of the final coats of finish.<br />
Pall-X Color<br />
Pall-X Color<br />
Pall-X 325<br />
Pall-X 325<br />
Red Oak<br />
White Oak<br />
Pall-X 98 Finish<br />
Pall-X 98 is a two component waterborne hardwood floor finish with<br />
unmatched durability and chemical resistance. This finish is ideal for<br />
commercial and high traffic residential applications. Pall-X 98 is a clear<br />
finish that allows the natural beauty of the floor to shine through the finish.<br />
It is available in three popular sheens: semi-gloss, satin, and matte.<br />
VOC compliant and<br />
100% fully cured<br />
in 4 days allows<br />
homeowners to become<br />
active on their floor<br />
quicker than when<br />
choosing traditional oil<br />
modified polyurethanes.<br />
Pall-X 96 Finish<br />
Pall-X 96 is a single component waterborne hardwood floor finish designed<br />
for residential or light commercial applications. This highly durable single<br />
component finish has excellent wear, chemical resistance, and the capability<br />
to be suitable for many wood flooring projects. Pall-X 96 is a clear finish that<br />
allows the natural beauty of the floor to shine through the finish.<br />
It is available in four<br />
popular sheens: gloss,<br />
semi-gloss, satin, and<br />
matte. VOC compliant<br />
and 100% fully cured<br />
in 7-10 days allows<br />
homeowners to become<br />
active on their floor<br />
quicker than when<br />
choosing traditional oil<br />
modified polyurethanes.
Change language