bearmachcatalogue2016

Tools
Battery Charger Smart (12v 5amp)
RING
• LED indicators show specific charging mode selected
• Includes a maintenance charge setting
• Charge stage indicator - displays where you are in the charging
process
• Setting for both standard and START/STOP vehicles
• Charging, maintenance, winter and repair modes
• Rubber wrap outer for added protection and grip
• Polarity protection for correct connection
• Fully insulated battery clips for safe protection during connection.
BA 8700
Universal
Battery Charger Smart/Analyser
RING
• "Mutli stage fully automatic Smart Chargers
• Auto charge applies the fastest charge, based on battery size
• Includes settings for both standard vehicles and START/STOP
• Includes battery repair tools to increase performance and battery
life
Includes the following battery and alternator analyses tools:
• Battery voltage - displays as a % the voltage status of a battery
• Start power test - measures voltage drop during engine start to
identify potential battery issues
• Alternator check - tests the recharging performance of the vehicles
alternator
• Battery cranking performance - measures the battery's cold
cranking performance to determine engine starting ability
• Charging current up to 12A
• Battery capacity: 25-300Ah
• Interactive LCD display
• Memory saver finction allows vehicle and audio settings to be
retained if the battery is removed
BA 8701
Universal
Circuit Tester - Heavy Duty
LASER
Tester for 6|12|24v automotive circuits.
Features includes 5ft long lead, cable protector and temperature
sensor, with 1.5m cable.
Suitable for testing faulty lights and short circuits on startres,
alternators, colling and heating components, radios and relays.
Not recommended for computers or sensors.
BA 4918 6-24 Volt Universal
Heat Shrink Kit
LASER
• Mini gas torch with heat shrink tubbing kit (162pc).
• Assorted coloured tubing and sizes: 1 x 15mm x 500mm black tube,
tubes supplied in red, green, blue, yellow, white and clear:1.5mm
x 60pc, 2.5mm x 35pc, 3mm x 25pc, 5mm x 20pc, 6mm x 10pc,
10mm x 10pc.
• Heat shrink tubing meet RoHS directive.
• Operating temperature range: -55°C to +125°C.
• Manufactured fro G5 general purpose, polyefin tubing.
• Characteristics: shrinkage ratio 2:1, very flexible, highly retardant,
resistant to fluids and solvents.
• Mini Butane gas torch supplied with full instructions. Capacity 6ml,
operating time 20mins, approximate temperature