bearmachcatalogue2016

Tools
Advance Xenon Timing Light
LASER
The timing light enables the synchronisation of the ignition system
with the piston movement. An inductive pick-up replaces the
necessity to disconnect the spark plug wire to operate the timing
light.
Timing readout: 0-60degree BTDC
Features:
• Timing advance up to 60 crankshaft degrees
• Superior performance at all speeds through 8000rpm
• Operates on all 12v ignition systems
• Xenon bulb providing Brilliant Blue/White
• 1,000.000 flash capacity.
• Automotive reverse polarity and overload protection.
• Inductive pick-up
• Double check light indicates incorrect hook up and faulty flash
BA 4885
Universal
Cylinder Leakage Tester 1000psi / 7 Bar
LASER
The 100psi (7bar) working pressure ensures adequate air pressure
and flow to the source of the compression loss plus the percentage
loss to be measured.
BA 4872
Universal
Timing Tool Kit
LASER
Specific kit supplied for Land Rover
• OEM cross reference and instructions included
• Essential tool
• Made in Sheffield
• Tools included: 303-1270, 303-1272, 303-1277
BA 4928 Freelander 2 Td4, 2.2 Duratorq TdCi 2006 on
Micro Meter Tappet Adjuster
LASER
Valve clearance is easy to adjust on all push rod engines or OHC
engines with top adjustment. Click-adjust make the job even easier
and absolutely precise.
This essential clearance adjustment ensures the valves (inlet
and outlet) open and close correctly resulting in better engine
performance.
A tool that fits the vehicles adjustment nut will be required.
BA 4883
Universal
Engine Cylinder Hone
LASER
The Laser engine cylinder hone is an indispensable tool for engine
overhauls.
Capacity 50-180mm (2”-7”) Bore Diameter
It enables the inside surfaces of engine cylinders to be cleaned of
carbon deposits and re-surfaced quickly, simply and effectively.
Replacement stone set for Engine Cylinder Hone, part number: BA
4863
BA 4863
Universal
BA 4864 Stones (Set of 3) Universal
Page 182
www.bearmach.com