Cztery poziomy Czyste, Tanie, w Pełni Niewykorzystany, Technologie Wodne dla zastosowań komercyjnych, przemysłowych i rolnictwa / Environmentally Friendly, Low Cost, Less Well Known Water Technology for The Future

• 60’Vacuum Saturation heating or cooling: Effect mix of
Accepted & Fully rejected by Western Mainstream(WM)
• ■ 60’Vacuum Saturation heating or cooling & Related processes: Many vacuum
related water technologies are used as fully standard process in some industries
while almost forgotten in other industries or residential applications.
WM Accepted effect: widely used process due to lower temperature(lower
energy use) water evaporation: M2&N2(helps desalination process &
dimineralization) by low temperature, lower energy use vaporization secondary/
tertiary step as std process in distillation, B3(soil-sand-oil separation from water)-
• Standard process in some industries(Pulp & Paper, Petro processing, Chemical)
but much less often used in other areas: Z2(fast-efficient heat conducting),
• This process can often replace hot/cold water based heating/cooling:
Conventional heating via hot water occurs by heat-giving from water towards
target medium, hence accomplished temperature tends to be uneven, but
saturated steam is same temperature in closed system so whole heating is
faster in even temperature(saves 10-30% of energy, same applies for cooling
process) This usually means higher & consistent product quality with less
rejects in manufacturing:
linkedin.com/in/newnatureparadigm - Ben Rusuisiak: Specialty Cleantech Research, Vancouver, Canada
310