Samsung 24" Dishwasher - DMT300RFW/XAA - User Manual ver. 1.0 (ENGLISH, FRENCH, SPANISH,17.08 MB)

Middle nozzle
1. Pull the upper rack towards the front and
remove it.
2. Check whether the nozzle holes are
clogged by food particles.
3. If cleaning is needed, remove the nozzle.
4. To remove the nozzle, unfasten and
remove the nut, and remove the nozzle.
5. Clean the nozzle, insert it again and fasten
the nut.
6. When fastening the nut, rotate it firmly by
hand.
7. Check whether the nozzle is engaged
correctly by rotating it by hand.
Upper nozzle
1. Check whether the nozzle holes are
clogged by food particles.
2. If cleaning is needed, remove the nozzle.
3. To remove the nozzle, pull out the upper
rack first, remove the duct connected to
the nozzle from the tub bracket, and then
remove the nozzle. To remove the bracket,
use tools such as a screwdriver.
4. Clean the nozzle and connect it to the
duct.
5. Insert the duct into the bracket.
6. Check whether the nozzle is engaged
correctly by rotating it by hand.
03 cleaning and maintaining
Storing your dishwasher
If you need to store your dishwasher for an extended period of time, first drain and disconnect it, as your
dishwasher may be damaged if water is left in the hoses and internal components before storage.
After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit
breaker.
cleaning and maintaining _21
DMT300-00062A .indb 21 2010-08-09 11:17:51