Installation Guide UNO UL 110v V1.1
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• Unclip the wiring loom from the foot sensor PCB noting which way round it was fitted.<br />
Refitting<br />
• Fit the wiring loom connector to the the foot sensor PCB. The connector should be orintated<br />
so the yellow cable is at the top, black in the middle and red at the bottom.<br />
• Replace the footcup plinth assembly and refit the two hex head bolts with washer and split<br />
ring<br />
Copyright © 2015 DDC Dolphin Ltd Page 15 of 36 November 15 IG<strong>UL</strong>-<strong>UNO</strong>-<strong>V1.1</strong>