Log Max Harvesting heads

0 5 10 15 20 25 30 35 40 45 in
Height : 1 937 mm / 76.3”
Weight : 2 022 kg / 4,456 lbs
Saw unit std /opt.
Saw 418 : 30 cc (1.83 cu.in), 80 cm (31.5”) cut capacity, 0.404” pitch
Saw 518 : 30 cc (1.83 cu.in), 65/72,5/80 cm (25.6”/28.5”/31.5”) cut capacity, 0.404” pitch
411XL : 60 cc (3.64 cu.in), 75,5/80 cm (29.7”/31.5”) max cut capacity, 3/4” pitch
Top saw 98B : 19 cc (1.16 cu.in), 48 cm (18.9”) cut capacity, 0.404” pitch
Feeding : Two feed rollers with variable displacement axial piston motors
Optional: Two feed rollers with fixed displacement motors
660-1 320 cc. / opt. 1,259 cc. - 40-81 cu.in / opt. 76.8 cu.in
Calculated feed force 1 , std/opt 45/41,2 kN / 10,116 / 9,464 lbf
Calculated feed speed 2 , std/opt 5,2 / 4,2 m/s / 16.4 / 13.1 fps
Delimbing
Max delimbing knife opening : 757 mm / 29.8”
Max full coverage delimbing diameter : 560 mm / 22”
Control system
Log Mate 500 / CabsWin / MaxiXplorer / DASA / MOTOMIT / DSP4000 / TJ300
Hydraulics
Max. pressure - Max. flow : 320 bar (4,641 psi) - 350 l/min (92.5 gpm)
Min. requirements for acceptable performance : 250 l/min (66 gpm)
Optional equipement
1 2 3
Active Friction Control
Electrically controlled measuring wheel
Color marking
Field repair kit
Hydraulic upper knife
Snow and dust cover
Top saw
25-35 tons 200-350 kNm
Most productive range
1. Min delimbing diameter 2. Max cutting diameter, std 3. Max cutting diameter, opt
(1) height to fellink link / (2) incl. roller & rotator / (3) calculated at 300 bar / (4) calculated at 300 l/min
25 Harvesting heads