M2 MMC Nov' '16 cc
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>MMC</strong><br />
Product News<br />
Easy does it<br />
Portakabin, the UK’s<br />
leading modular<br />
building specialist, has<br />
provided multiple<br />
buildings for a new<br />
flagship aircraft<br />
maintenance hangar at<br />
Gatwick Airport for<br />
Europe’s leading<br />
airline, easyJet.<br />
Portakabin worked in partnership with easyJet and alongside Rubb<br />
Buildings who designed and installed the 5,490m2 twin span<br />
hangar, which has a modular steel frame fitted with 8,700m2 of<br />
insulated PVC membrane. The facility can a<strong>cc</strong>ommodate up to two<br />
aircraft for light-base overnight maintenance.<br />
Around 1,000m2 of a<strong>cc</strong>ommodation were provided by Portakabin for<br />
30 on-site staff to facilitate the maintenance of easyJet’s fleet of<br />
aircraft, which is carried out overnight, seven days a week.<br />
Six Portakabin buildings were installed inside the hangar structure<br />
for two maintenance control stations, an additional office area, a<br />
locker room, toilets, showers and changing facilities, and a<br />
workshop. A larger modular building is located externally,<br />
immediately adjacent to the hangar, for the storage of parts and<br />
tooling on the ground floor with offices, a canteen and a meeting<br />
room above.<br />
www.portakabin.co.uk<br />
Kingspan TEK beats Alpine snow<br />
The Kingspan<br />
TEK Building<br />
System has<br />
been installed<br />
as part of a<br />
luxury ski chalet<br />
in the French<br />
Alps, helping<br />
the project to be<br />
completed<br />
within the tight<br />
schedule of the<br />
Alpine building<br />
season.<br />
400m2 of the Kingspan TEK Building System was specified to<br />
complement the green oak frame, designed and constructed by<br />
Westwind Oak. The System comprises of SIPs, which are pre-cut to each<br />
project’s exact specifications, limiting on-site alterations and waste. As<br />
the snow load on the roof can be up to 2m deep, extra beams were also<br />
added and reinforced to support the Kingspan TEK panels. The roof<br />
angle also had to be low to ensure that the snow sits on the roof, helping<br />
to further insulate the roof in the coldest months. The highly insulated<br />
core of the 142mm Kingspan TEK Building System panels can allow them<br />
to achieve U-values of 0.20 W/m2.K and below.<br />
www.kingspantek.co.uk<br />
BeA sets sights on glue gun su<strong>cc</strong>ess<br />
BeA, the manufacturer of fastening<br />
technology, tools and consumables for<br />
the off-site construction industry, has<br />
made a new addition to its product portfolio.<br />
The business has introduced a new cordless<br />
glue gun which combines impressive<br />
performance with exceptional flexibility and<br />
versatility.<br />
Known as the b-tec 807 Glue Gun, the new BeA<br />
product is ideal for a wide range of light to<br />
medium duty fixing applications.<br />
As it is battery-powered, the b-tec 807 Glue<br />
Gun frees users from being tied to a mains<br />
power source. It employs the same RYOBI®<br />
18V 1.5Ah lithium+ battery that’s commonly<br />
employed in other power tools.<br />
This battery also has a 4-stage charge<br />
indicator - which enables easy monitoring of<br />
remaining battery life - and delivers fast<br />
recharge times. A full recharge takes just 60<br />
minutes.<br />
In addition, the b-tec 807 uses 12mm (1/2”) glue<br />
sticks which are a standard and widely<br />
available size.<br />
6 <strong>MMC</strong><br />
Nov 2016 <strong>M2</strong><br />
Further benefits include a rapid warm up<br />
time enabling almost immediate use and<br />
helping to reduce unwanted battery<br />
consumption.<br />
Once its illuminated power switch is turned<br />
on, the b-tec 807 Glue Gun is ready for use<br />
in only 3 minutes.<br />
The tool is also comfortable and easy to<br />
work with. It features an adjustable full<br />
hand lever trigger and a soft grip handle. It<br />
also has a narrow profile and extension<br />
nozzle which makes it easier to apply glue<br />
a<strong>cc</strong>urately.<br />
BeA is offering the b-tec 807 Glue Gun as a<br />
complete kit with a battery, charger and<br />
case or as individual guns. Separate<br />
battery and charger sets are also available.<br />
Commenting on the launch of the b-tec 807<br />
Glue Gun, Paul Shepherd, national sales<br />
manager at BeA, said: “BeA already offers a<br />
range of high performance fastening tools and<br />
consumables for customers in the off-site<br />
construction sector.<br />
“Our new b-tec 807 adds to that capability and<br />
provides a fast and flexible fixing solution.<br />
“It’s highly portable, convenient and perfect for<br />
use in confined spaces, in situations where<br />
mains power is restricted or for those quick<br />
and unexpected fixing jobs.”<br />
www.bea-group.com<br />
Fast and flexible fixing.<br />
Manufacturer of fastening<br />
technology, tools and<br />
consumables, BeA has added the<br />
new battery-powered b-tec 807<br />
Glue Gun to its range.