Ethylenoxid Sterilisation - Vor- und Nachkonditionierungskammern

Rev.date
Replaces:
Rev.sign.
Rev.no. R
Date
23-05-20
Tolerances after DS/ISO 2768C where n
Weight
Main dwg
This drawing must not be shown or
8
7
6
5
4
3
2
F
Preconditioning Cell
E
Preconditioning is a necessary step in the sterilization process,
which prepares products / devices ahead of sterilization and save
precious time inside the sterilizer, it enhances ethylene oxide
penetration into the product and packaging.
D
In LESNI Preconditioning Cell the products are in a temperature and
humidity controlled area.
C
A typical range for this preconditioning step is a temperature at 40
– 60 °C and relative humidity of 50 – 65 %.
B
Product on pallets placed in closed, insulated chamber where air
flow, temperature and relative humidity evenly distributed and
maintained at pre-set values.
A
102652,43 kg
8
7
6
5
4
3
2
Preconditioning Sterilization Degassing Air Purification