Catalogue 2017

Adapter
Increasing part
Paul Gothe GmbH
to increase G ½ external thread to G ¾ external thread.
Entrance: internal thread G ½
Exit: external thread G ¾
Material Stainless Steel (up to 500°C):
Material Titanium (up to 400°C):
Art.-No.: 32.01-A
Art.-No.: 32.01-T
Reducing part
to reduce G ¾ external thread to G ½ external thread.
Entrance: internal thread G ¾
Exit: external thread G ½
Material Stainless Steel (up to 500°C):
Material Titanium (up to 400°C):
Art.-No.: 32.02-A
Art.-No.: 32.02-T
Adapter inner tube
to fix the inner tube at the exit of the suction tube with exchangeable inner tubes,
at both sides external thread G ½, one side with drilling for inner tube
(10 x 1 mm)
Entrance: external thread G ½ with drilling
Exit: external thread G ½
Material Stainless Steel (up to 500°C):
Material Titanium (up to 400°C):
Art.-Nr.: 3.011-A
Art.-Nr.: 3.011-T
Connecting part for bubbler
to connect bubblers behind G ½ threads.
Entrance: internal thread G ½,
Exit: spherical joint (ball) KS 19
Material Titanium (up to 400°C):
Art.-No.: 3.06-T
Connecting part
for one bubbler street.
Entrance: spherical joint (pan KS 19),
Exit: spherical joint (ball KS 19)
Material Duran:
Material Quartz:
Material Titanium (up to 400°C):
Art.-No.: 40.02-D
Art.-No.: 40.02-Q
Art.-No.: 40.02-T
Substitute part
This part has the length of the filter devices and can set for it.
Entrance: internal thread G ½
Exit: external thread G ½
Material Stainless Steel
Material Titanium
Art.-No.: 40.013-A
Art.-No.: 40.013-T
Closing cap for external thread G ½
Caps with seals to close G ½ threads,
material: brass, with PTFE-Seal
Art.-Nr.: 40.016-Z
Sealing plug for G ½ internal thread Material Brass Art.-Nr.: 21003.004.2
www.paulgothe.de – Wittener Str. 82, 44789 Bochum, Tel: ++49-0234 - 33 51 80, FAX: ++49-0234 - 30 82 17