Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
A<br />
H HARRIS<br />
MASTERSEAL 590<br />
Formerly Waterplug<br />
One-component, cement-based, fast-setting water-stop repair<br />
mortar.<br />
• Sets above or below water (hydraulic)<br />
• Shrinkage compensated.<br />
• Ready to topcoat in 15 minutes with appropriate product<br />
PRODUCT ID: 1006479<br />
MASTERSEAL 581<br />
MEL-ROL MEMBRANE<br />
Rolled, Self-Adhering Waterpro<strong>of</strong>ing<br />
Membrane<br />
• Offers a quick and<br />
easy-to-apply system for<br />
maximum productivity.<br />
• Special membrane-tomembrane<br />
adhesion<br />
provides additional<br />
overlap security.<br />
• Meets or exceeds the test<br />
requirements <strong>of</strong> all currently applicable specifications.<br />
PRODUCT ID: 5110060<br />
THERMAL & MOISTURE PROTECTION<br />
Formerly Thoroseal<br />
A Portland cement-based coating for concrete and masonry that<br />
resists both positive and negative hydrostatic pressure. Polymermodified<br />
with MasterEmaco A 660, MasterSeal 581 creates a low<br />
maintenance and highly durable waterpro<strong>of</strong> barrier.<br />
• Suitable for use below grade interior and exterior and in water<br />
treatment construction<br />
• Compatible with high-performance coatings, including a wide<br />
range <strong>of</strong> architectural coatings and textured finishes<br />
• Hides minor surface defects and blemishes in architectural<br />
concrete<br />
PRODUCT ID: 1006460<br />
SILPRO EASY PLUG<br />
Cementitious material formulated to set rapidly (3 to 5 minutes) to<br />
patch cracks and holes. It is particularly effective in stopping the flow<br />
<strong>of</strong> water permanently. Use it indoors or outdoors.<br />
• Above or below grade.<br />
• Sets up under water<br />
• Effective against hydrostatic pressure<br />
• Unaffected by UV exposure<br />
• Resistant to freeze/thaw cycling<br />
PRODUCT ID: 3555410 10LB/PAIL<br />
3555450 50LB/PAIL<br />
SILPRO SEAL COTE<br />
Portland cement-based coating used to waterpro<strong>of</strong>, protect, and<br />
decorate new and old concrete and masonry<br />
• Brush-applied over concrete or masonry<br />
PROTECTION COURSE<br />
A multi-ply semi-rigid core<br />
composed <strong>of</strong> a mineral-fortified<br />
asphalt core formed between<br />
two outside layers <strong>of</strong> asphaltimpregnated<br />
reinforced mats,<br />
manufactured in accordance<br />
with ASTM D 6506. When<br />
properly applied, PROTECTION<br />
COURSE will absorb the<br />
impact <strong>of</strong> aggregate shock and<br />
normal jobsite foot traffic. It<br />
also protects the membrane waterpro<strong>of</strong>ing from penetration by<br />
sharp aggregate during backfilling and later settlement. PROTECTION<br />
COURSE is available in two types; PC-2, Standard Duty and PC-3,<br />
Heavy Duty. Both types are economical and convenient to use.<br />
PRODUCT ID: 5720480080<br />
LEAKMASTER LV-1<br />
Leakmaster LV-1 is a single<br />
component water-swelling<br />
sealant with excellent and<br />
unique properties. Leakmaster<br />
may be applied in locations<br />
where conventional solid<br />
sealants cannot be easily applied.<br />
This includes irregular<br />
shaped joints, rough surfaces,<br />
odd penetrations, etc. After<br />
curing, Leakmaster has excellent physical properties. The rubber-like<br />
elasticity <strong>of</strong> the material and expansion characteristics create an<br />
effective watertight seal.<br />
PRODUCT ID: LV-1<br />
PRODUCT ID: 3555050<br />
120 www.ahharris.com
Change language