Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
A<br />
H HARRIS<br />
ALUMINUM NOSING 801 W/ ANCHOR, NUTS &<br />
BOLTS<br />
Non-Slip cast metal stair nosing with #24 virgin grain Silicon Carbide<br />
abrasive granules embedded into the walking surface while the<br />
matrix is in a molten state.<br />
PRODUCT ID: 801-6<br />
EXTRUDED STAIR NOSING 3551<br />
Nosings are manufactured from an extruded aluminum base filled<br />
with a mixture <strong>of</strong> anti-slip abrasive granules in an advanced formula<br />
epoxy binder. Their remarkable strength is capable <strong>of</strong> absorbing<br />
heavy impact.<br />
• Impact Resistant<br />
• Barrier-Free<br />
• Anti-Slip Surface<br />
• Economical<br />
ENERSHIELD-HP<br />
ENERSHIELD-HP is a one component fluid-applied vapor permeable<br />
air/ water-resistive barrier. This resilient waterpro<strong>of</strong> coating may be<br />
roller-, brush-, trowel-, or spray-applied directly to approved wall<br />
substrates. It provides excellent secondary moisture protection to<br />
BASF Wall Systems and most other wall claddings.<br />
Available in High Permeability and Impermeable versions<br />
• Liquid-applied, continuous membrane eliminates seams, lap<br />
joints and staples; transmits wind load directly to the substrate.<br />
• Meets ASTM E2357, ICC-ES AC212 and ICC-ES AC148<br />
requirements<br />
• Fully qualified as an air/water-resistive barrier and flexible<br />
flashing material<br />
• Approved for use under most wall claddings on mixed-cladding<br />
buildings<br />
• Provides a seamless air and water-resistive barrier<br />
• Spray-, roller-, trowel- or brush-applied<br />
• Meets ABAA specifications<br />
• Water based; safe for workers and environment, easy clean up<br />
PRODUCT ID: 3551-6<br />
PVC FLASHING 20MIL<br />
A polyvinyl chloride sheet recommended for concealed applications<br />
only; an excellent waterpro<strong>of</strong>ing membrane.<br />
PRODUCT ID: 152018NF<br />
TERMINATION BAR<br />
Used at top <strong>of</strong> flashing to secure it to backup. Termination Bars are<br />
fabricated from type 304 stainless steel, aluminum, and plastic.<br />
Compatible with all H&B membrane and copper-laminate flashings.<br />
PRODUCT ID: ALUMINUM<br />
MASTERSEAL® 610, 614, 615<br />
Formerly Hydrocide 600, 700 and 700B<br />
MasterSeal 610, 614 and 615 are cold-applied water-based<br />
emulsified-asphalt damppro<strong>of</strong>ing and vapor-retarding coatings for<br />
use on “green” or slightly damp surfaces.<br />
MasterSeal 610 is fiber-free for application by brush or spray.<br />
MasterSeal 614 is reinforced with long fibers for application by<br />
trowel.<br />
MasterSeal 615 is reinforced with short fibers for application by<br />
brush or spray<br />
Non-flammable to minimize fire hazard during application<br />
•User-friendly water clean-up formula;reduces clean-up time<br />
•Flexible<br />
•Wide service temperature range <strong>of</strong> -40 to 150° F (-40 to 66°c)<br />
MASONRY<br />
SHEET LEAD<br />
MAYCO’s strip lead is an ideal form <strong>of</strong> sheet lead for building,<br />
industrial, water pro<strong>of</strong>ing, and flashing applications and come in 50<br />
lb. rolls for ease <strong>of</strong> handling. Our strip lead is also available in large<br />
coils.<br />
PRODUCT ID: 15<br />
MASTERPROTECT® H177<br />
Formerly EnviroSeal Double7 for Brick<br />
High-performance, breathable, water-based, silane/siloxane<br />
water-repellent sealer treats brick and mortar providing long-lasting<br />
protection against moisture intrusion.<br />
• VOC Compliant for EPA and most regional jurisdictions<br />
• Transparent and non-staining; does not alter surface<br />
appearance<br />
• Easy to apply<br />
• Appropriate for vertical, interior or exterior and above grade<br />
applications<br />
154 www.ahharris.com