Construction booklet - portfolio

Recommendations

Info

Step 1: Constructing a paper model of the dome What you’ll need: Paper, Glue, Scissors • Cut 10 triangles with dimensions of 2.94 x 2.94 x 2.94 cm. • Cut 30 triangles with dimensions of 2.59 x 2.59 x 2.94 cm. Note: Before cutting them, make sure you leave a 0.5 cm margin on each side and, once cut, fold it in. This will help in gluing the triangles together. Line A: 2.59 cm Line B: 2.94 cm The final model should look like this: • Once you have cut all the pieces, start gluing them together at the folded edges, following the plan and section provided below. Note: Blue Line=2.94 cm, Red Line=2.59cm
Step 2: Constructing the dome out of ABS acrylic strips What you’ll need: 10 2.4x0.5x250 mm ABS acrylic strips, Plastic weld, paper model from Step 1, black acrylic paint, brush • Start by making the 5 triangles at the top and, using the plastic weld, glue them together with the paper model as a guide, forming a pentagon. Note: The sides of two adjacent triangles form a double line. This is only applied to the first five triangles, to indicate that they are windows, in contrast to the rest of the glass triangles. • Once the dome is constructed, paint both the inside and outside black. • Continue constructing the dome around the paper model now using a single line for the rest of the triangle sides.
Page 1 and 2: ev·er·ie /rĕʹvə-rē/ n. 1 A st
Page 3: The model
Page 7 and 8: • Using a butter knife, apply a c
Page 9 and 10: • Glue Sheet 2 on top of Sheet 3.
Page 11 and 12: • Apply some polyfilla to the bas

Construction booklet - portfolio

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?