EN mobile tool cabinets

More documents

Info

ULTIMATEline ACCESSORIES Rear wall system for tool cabinets • For the accommodation of additional tools • For organising and fastening tools • Different system colour • Consisting of 2 square peg board 70 x 45 cm • Steel sheet construction ULTIMATEline alu grooved top • Can be used instead of the ABS plate • Easy to maintain • Surface is lightly corrugated • Ideal for use as a work surface Drawer divider set • For use only in drawers with inside dimensions 565 x 395 mm • Partitioning possibilities for various utensils • Individually adjustable • Sheet steel 885.9920 625.0 335.0 1.6 1.31 885.9901 727.0 90.0 8.00 888.9902 727.0 90.0 8.00 ULTIMATEline wooden worktop • Multiplex Beech Plywood • Joint free • Resistant to warping • Glued plywood • Protective coating • Smooth work surface 220 V Cable reel • Clamping device • Ideal for heavy use on construction sites, in the workshop and industrial areas • 10 Meter cable length • Drum body out of special plastic • 4 Protected socket outlets • Overheating protection • Control lamp for overheating and overload • 4 x Safety plugs 875.9940 23 pcs Drawer divider set 3.00 consists of: 885.9915 460.0 739.0 30.0 5.00 Mounting for part system, slotted, 875.9941 565x50x1.5 mm 0.53 875.9942 Coarse divider, slotted, 393x50x1.5 mm 1.20 875.9943 Fine divider, non slotted, 188x50x1.5 mm 0.45 875.9944 Fine divider, non slotted, 150x50x1.5 mm 0.35 875.9945 Fine divider, non slotted, 112x50x1.5 mm 0.27 875.9946 Fine divider, non slotted, 74x50x1.5 mm 0.18 ULTIMATEline storage tray • Suitable for hole measurements 10 x 10 mm - hole distance 38 mm • Enlarges the surface working area • Working surface: 375 x 308 mm • When not in use can fold away • Ideal for documents, laptop, small parts, etc. 875.9930 238.0 290.0 1.20 885.9935 420.0 360.0 27.0 3.20 885.9936 420.0 360.0 27.0 3.20 560
1 ULTIMATEline paper roll holder ULTIMATEline universal can holder ULTIMATEline suction pads 2 • Suitable for hole measurements 10 x 10 mm - hole distance 38 mm • For paper rolls to a max. Ø 350 mm and max. 320 mm width • Suitable for hole measurements 10 x 10 mm - hole distance 38 mm • Without separating strip • When not in use can fold away • Ideal for cans, bottles, etc. • Slide on • With revolving suction cup with 80 kg of lifting force • 2 dead centre heads • With quick release lever • With intake mechanics and fast change device • Suitable for all smooth materials with gas density surfaces 3 4 5 6 7 885.9955 368.0 80.8 52.0 0.50 885.9956 368.0 80.8 52.0 0.50 8 885.9940 368.0 75.0 52.0 0.60 885.9941 368.0 75.0 52.0 0.60 ULTIMATEline universal tray • Suitable for hole measurements 10 x 10 mm - hole distance 38 mm • Internal measurements: 338 x 180 mm • Ideal for documents ULTIMATEline carrier truck • Mobilizes tool cabinet sets • Handle foam coated • Extendable handle • Two fixed wheels Ø 75 mm • Two castor wheels Ø 75 mm with brake • Steel sheet construction 885.9960 120,0 330.0 1.75 885.9961 120,0 330.0 1.75 ULTIMATEline work tray • Slide on • Pivoting • Ideal for documents, laptop, etc. 9 10 11 12 13 14 15 885.9945 340.0 75.0 180.9 0.84 885.9946 340.0 75.0 180.9 0.84 16 17 885.9930 780.0 480.0 170.0 7.60 885.9931 780.0 480.0 170.0 7.60 18 885.9910 190.0 188.0 35.0 1.20 ULTIMATEline storage tray insert 885.9911 190.0 188.0 35.0 1.20 19 • Storage tray for small parts • Suitable for use in the tool cabinet drawer • Smooth surface 20 ULTIMATEline small part storage tray 21 • Suitable for hole measurements 10 x 10 mm - hole distance 38 mm • With fixed dividers • When not in use can fold away • Ideal for small parts, screws, etc. 22 23 24 25 26 885.9950 368.0 50.0 52.0 0.40 885.9951 368.0 50.0 52.0 0.40 885.9925 570.0 153.0 10.0 0.95 885.9926 570.0 153.0 10.0 0.95 27 561 i
Page 2 and 3: TOOL CABINET / INSERT MODULE SYSTEM
Page 4 and 5: TOOL CABINETS 4 colours, 4 drawer c
Page 6 and 7: TOOL BAGS AND BOXES Textile hammer
Page 8 and 9: BASICline TOOL CABINETS BASICline G
Page 10 and 11: MASTERline BLACK/RED tool cabinet w
Page 12 and 13: MASTERline ACCESSORIES Rear wall sy
Page 16 and 17: SCS - SAFETY CONTROL SYSTEM The ben
Page 18 and 19: SCS SYSTEM INSERT SETS SCS system i
Page 20 and 21: SCS system insert set, mechanics
Page 22 and 23: SCS - SAFETY CONTROL SYSTEM The ben
Page 24 and 25: SCS CHROMEplus® Open double ring s
Page 26 and 27: SCS Socket set • 1/3 System inser
Page 30 and 31: SCS CHROMEplus® socket set • 1/3
Page 32 and 33: SCS Bit socket set • 1/3 System i
Page 34 and 35: 2 x 1/4“: PH1 - PH2 2 x 1/4“: P
Page 36 and 37: SCS TX T-handle key wrench-set •
Page 38 and 39: 1/3 SCS - PULLER SCS Puller set •
Page 40 and 41: SCS CHROMEplus® double open ended
Page 42 and 43: 2/3 SCS - SOCKET WRENCH 1/2“ SCS
Page 46 and 47: SCS ERGOTORQUEplus® T-handle socke
Page 48 and 49: SCS spanner set • 1/1 System inse
Page 50 and 51: SCS CHROMEplus® combination wrench
Page 52 and 53: 9 x 9 x 1/2“: 6 - 7 - 8 - 9 - 10
Page 54 and 55: Visit our homepage: www.kstools.com
Page 60 and 61: 1/1 SCS - IMPACT SOCKET WRENCH 3 x
Page 62 and 63: 1 x 160 mm 1 x 160 mm 1 x 160 mm 1
Page 64 and 65:
SCS Chisel and hammer set • 1/1 S
show all

EN mobile tool cabinets

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?