Access Control Catalog 2017 - version 4.5.2 (EUR – FOB Madrid)

More documents

Recommendations

Info

11.2 POWER SUPPLIES ON DIN RAIL To Be Installed on Industrial DIN Rail TS-35/7.5 or 15 MEANWELL® General Type - Single Phase P/N Model Size Power Flow Description List Price DRP- 480S-24 DRP- 480S-48 MEANWE- LL® DRP- 480S Power Supply 227 mm x 125.2 mm x 100 mm 480 W 20A@24VDC 10A@48VDC Single output industrial DIN Rail AC-DC power supplies, to be installed on DIN Rail TS-35/7.5 or 15, UL 508, EN61000-3-2 and EN61000-6-2 certified. Output rated power oscilating between 24 VDC and 48 VDC (depending on the chosen model, the current tension may vary from 20A to 10A, respectively). With power LED indicator and overloading protection, short-circuit, voltage and temperature saturation. Cooling by free air convection. High efficiency (89%) and low dissipation level. AC entry range to be selected. 268,50 € MEANWELL® General Type or Wide Entry Range, three-phase P/N Model Size Power Flow Description List Price DRH- 120-24 DRH- 120-48 MEANWE- LL® DRH- 120 Power Supply 66.5 mm x 125.2 mm x 100 mm 120 W 5A@24VDC 2.5A@48VDC Single output industrial DIN Rail AC-DC power supplies, to be installed on DIN Rail TS-35/7.5 or 15, EN61000-6-2 certified. Output rated power oscilating between 24 VDC and 48 VDC (depending on the chosen model, the current tension may vary from 10A to 2.5A, respectively). With power LED indicator and overloading protection, short-circuit, voltage and temperature saturation. Cooling by free air convection. Fixed switching frecuency at 70 KHz. 145,50 € DRT- 240-24 DRT- 240-48 MEANWE- LL® DRT-240 Power Supply 125.5 mm x 125.2 mm x 100 mm 240 W 10A@24VDC 5A@48VDC Single output industrial DIN Rail AC-DC power supplies, to be installed on DIN Rail TS-35/7.5 or 15, EN61000-6-2 and UL 508 certified. Output rated power oscilating between 24 VDC and 48 VDC (depending on the chosen model, the current tension may vary from 10A to 5A, respectively). With power LED indicator and overloading protection, short-circuit, voltage and temperature saturation. Cooling by free air convection. Fixed switching frecuency at 70 KHz. High efficiency (89%) and low dissipation level. Wide AC entry range (340-500V). 200,10 € DRT- 480-24 DRT- 480-48 MEANWE- LL® DRT-480 Power Supply 227 mm x 125.2 mm x 100 mm 480 W 20A@24VDC Single output industrial DIN Rail AC-DC power supplies, to be installed on DIN Rail TS-35/7.5 or 15, EN61000-6-2 and UL 508 certified. Output rated power oscilating between 24 VDC and 48 VDC (depending on the chosen model, the current tension may vary from 20A to 10A, respectively). With power LED indicator and overloading protection, short-circuit, voltage 10A@48VDC and temperature saturation. Cooling by free air convection. High efficiency (89%) and low dissipation level. Wide AC entry range (340-500V). 284,10 € DRT- 960-24 DRT- 960-48 MEANWE- LL® DRT-960 Power Supply 276 mm x 125.2 mm x 100 mm 960 W 40A@24VDC 20A@48VDC Single output industrial DIN Rail AC-DC power supplies, to be installed on DIN Rail TS-35/7.5 or 15, EN61000-6-2 and UL 508 certified. Output rated power oscilating between 24 VDC and 48 VDC (depending on the chosen model, the current tension may vary from 40A to 20A, respectively). With power LED indicator and overloading protection, short-circuit, voltage and temperature saturation. Cooling by free air convection. High efficiency (89%) and low dissipation level. Wide AC entry range (340-500V). 537,00 € 326 TEL. +1 (305) 778 1960 · FAX. +1 (305) 615 1080 · HELLO@EMACS.GLOBAL · STORE.EMACS.GLOBAL
11.2 POWER SUPPLIES ON DIN RAIL To Be Installed on Industrial DIN Rail TS-35/7.5 or 15 MEANWELL® Redundants P/N Model Size Power Flow Description List Price DR- RDN20 MEANWE- LL® DR-RDN20 Power Module 55.5 mm x 125.2 mm x 100 mm Input: 21~28 VDC Output: 30 VDC Input: 20 A Output: 20 A DC-DC power supply redundancy module, to be installed on DIN Rail TS-35/7.5 or 15, with single output, UL508 certified. Input voltage range oscilating between 21 VDC or 28 VDC, depending on the selected relay. 30 VDC output voltage and 20A current intensity. With power LED indicator. Cooling by free air convection. Perfect as a switching source or as a UPS for 24 VDC systems. 61,50 € DR-UPS40 MEANWE- LL® DR- UPS40 Battery Module 55.5 mm x 125.2 mm x 100 mm Input: 24~29 VDC Output: 21~29 VDC Input: 40 A Output: 4, 7 and 12 Ah UPS battery system controller for DIN TS-35/7.5 or 15 rail embedding, with single outputa and UL508 certified. 24 VDC output voltage with 4, 7 and 12Ah options. With power LED indicator. Cooling by free air convection. Perfect as a 24VDC system backup, up to 40A. Parallel connection to DC BUS. Battery polarity protection. 103,20 € 327 TEL. +1 (305) 778 1960 · FAX. +1 (305) 615 1080 · HELLO@EMACS.GLOBAL · STORE.EMACS.GLOBAL
Page 1 and 2:
v4.4.0 v4.5.2 v.4.2.0 CATALOG ACCES
Page 3 and 4:
INDEX Accessories and options 91 HI
Page 5 and 6:
INDEX 8 CARD PRINTERS 224 8.1 STAND
Page 7 and 8:
INDEX 12.5 CONTROL ELEMENTS 355 COM
Page 9 and 10:
2017 GENERAL SALES TERMS 38. HID®
Page 11 and 12:
1.1 CONTACTLESS READERS NFC and 13,
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
1.1 CONTACTLESS READERS 13,56 MHz (
Page 19 and 20:
1.1 CONTACTLESS READERS 13,56 MHz H
Page 21 and 22:
1.1 CONTACTLESS READERS 13,56 MHz i
Page 23 and 24:
1.1 CONTACTLESS READERS 13,56 MHz H
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
1.1 CONTACTLESS READERS 125 KHz HID
Page 31 and 32:
1.1 CONTACTLESS READERS 125 KHz Acc
Page 33 and 34:
1.1 CONTACTLESS READERS 125 KHz IND
Page 35 and 36:
1.1 CONTACTLESS READERS 125 KHz IND
Page 37 and 38:
1.1 CONTACTLESS READERS 125 KHz Acc
Page 39 and 40:
1.2 CONTACTLESS SMART CARD READ/WRI
Page 41 and 42:
1.3 BIOMETRIC READERS 13,56 MHz (12
Page 43 and 44:
1.4 MAGNETIC STRIPE CARD READERS 13
Page 45 and 46:
1.5 AUTOMATIC VEHICLE IDENTIFICATIO
Page 47 and 48:
1.6 MOTOR-DRIVEN CARD READERS Motor
Page 49 and 50:
1.7 HIGH SECURITY READERS Personal
Page 51 and 52:
1.8 OEM READERS FOR INTEGRATORS 13,
Page 53 and 54:
2.1 ASSA ABLOY® VINGCARD® SMART L
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
2.2 ASSA ABLOY® APERIO SMART LOCKS
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
3.0 CREDENTIALS Contact and Contact
Page 69 and 70:
3.1 CONTACTLESS PROXIMITY CARDS 125
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
3.2 13,56 MHz (125 KHz optional) HI
Page 89 and 90:
3.2 13,56 MHz (125 KHz optional) HI
Page 91 and 92:
3.2 13,56 MHz (125 KHz optional) CO
Page 93 and 94:
3.2 13,56 MHz (125 KHz optional) CO
Page 95 and 96:
3.2 CONTACTLESS SMART CARDS 13,56 M
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
3.4 CONTACT SMART CARDS Also with 1
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
3.4 CREDENCIALES INTELIGENTES CON C
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
3.6 EMBEDDED OEM CREDENTIALS 13,56
Page 129 and 130:
3.7 NON-TECHNOLOGY CARDS High Quali
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
3.8 MANAGED SERVICES FOR CREDENTIAL
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
3.9 NOT CUSTOMIZED ACCESSORIES AND
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
4.0 CARD PROGRAMMERS Encoding Tools
Page 157 and 158:
4.1 13,56 MHZ AND 125 KHZ CARD PROG
Page 159 and 160:
4.2 13,56 MHZ CARD PROGRAMMERS For
Page 161 and 162:
4.3 PROX CARDS PROGRAMMERS For 125
Page 163 and 164:
5.1 CONTROLLERS AND ACCESS INTERFAC
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
5.2 Host-Based Access Control Syste
Page 171 and 172:
5.2 Host-Based Access Control Syste
Page 173 and 174:
5.3 BIOMETRIC ACCESS CONTROLLERS Ho
Page 175 and 176:
6.1 Integrated Security Management
Page 177 and 178:
6.1 INTEGRATED SECURITY SW PLATFORM
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
6.2 VISITOR MANAGEMENT SOFTWARE Cen
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
6.3 HIGH SECURITY PIV VALIDATION SO
Page 191 and 192:
6.3 HIGH SECURITY PIV VALIDATION SO
Page 193 and 194:
6.5 CREDENTIAL CUSTOMIZATION SOFTWA
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
7.1 CONTACT CHIP READERS CR-80 & SI
Page 207 and 208:
7.1 CONTACT CHIP READERS CR-80 & SI
Page 209 and 210:
7.2 PROXIMITY READERS 125 KHz & 13,
Page 211 and 212:
7.3 PROXIMITY AND CONTACT CHIP READ
Page 213 and 214:
7.4 BIOMETRIC READERS Fingerprint C
Page 215 and 216:
7.6 OCR READERS AND SCANNERS Optica
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
8.0 CARD PRINTERS Printing and Lami
Page 225 and 226:
8.1 STANDARD PRINTERS Die Sublimati
Page 227 and 228:
8.1 STANDARD PRINTERS Die Sublimati
Page 229 and 230:
8.2 PROFESSIONAL PRINTERS Professio
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
8.3 INDUSTRIAL PRINTERS Industrial
Page 245 and 246:
8.3 INDUSTRIAL PRINTERS Industrial
Page 247 and 248:
8.4 Printing and Laminating Supplie
Page 249 and 250:
8.4 Printing and Laminating Supplie
Page 251 and 252:
8.4 RIBBONS AND PRINTING FILMS Prin
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
8.5 RIBBONS AND PRINTING FILMS Mana
Page 259 and 260:
9.0 EMBEDDED MODULES Integrated OEM
Page 261 and 262:
9.1 OEM MODULES 125 KHz & 13,56 MHz
Page 263 and 264:
9.1 13,56 MHz OEM MODULES Configura
Page 265 and 266:
9.1 OEM MODULES 125 KHz and Contact
Page 267 and 268:
9.2 PCB CONVERTER MODULES Protocol
Page 269 and 270:
10.1 ELECTRIC LOCKS Configurations
Page 271 and 272:
10.1 ELECTRIC LOCKS Embedded Electr
Page 273 and 274:
10.1 ELECTRIC LOCKS Embedded Electr
Page 275 and 276: 10.1 ELECTRIC LOCKS Embedded Electr
Page 291 and 292: 10.1 ELECTRIC LOCKS Surface Electri
Page 293 and 294: 10.1 ELECTRIC LOCKS Surface Electri
Page 299 and 300: 10.2 ELECTROMAGNETIC LOCKS Surface
Page 309 and 310: 10.3 SOLENOID BOLT LOCKS CDVI® Sol
Page 311 and 312: 10.4 MOUNTING ELEMENTS Rim Door loo
Page 313 and 314: 10.4 MOUNTING ELEMENTS Switches Exi
Page 315 and 316: 10.4 MOUNTING ELEMENTS Long Escutch
Page 317 and 318: 10.4 MOUNTING ELEMENTS Long Escutch
Page 319 and 320: 11.1 ENCLOSED SWITCHING POWER SOURC
Page 325: 11.2 POWER SUPPLIES ON DIN RAIL To
Page 329 and 330: 11.3 SECURITY SERIES POWER SUPPLIES
Page 331 and 332: 11.5 POWER SOURCES FOR TURNSTILES P
Page 333 and 334: 11.6 BATTERIES Sealed Lead Acid Bat
Page 335 and 336: 2.0 TURNSTILES Automatic Devices fo
Page 337 and 338: 12.1 TURNSTILES FOR ACCESS Tripod M
Page 339 and 340: 12.2 ROTATORY GATES Turning Arms an
Page 341 and 342: 12.2 ROTATORY GATES Turning Arms an
Page 343 and 344: 12.3 ACCESS GATES Motorized Access
Page 345 and 346: 12.3 ACCESS GATES Motorized Access
Page 347 and 348: 12.4 ACCESS PANELS Motorized and Fi
Page 349 and 350: 12.4 ACCESS PANELS Motorized and Fi
Page 351 and 352: 12.5 AUXILIARY ELEMENTS Auxiliary E
Page 353 and 354: 12.5 AUXILIARY ELEMENTS Auxiliary E
Page 355 and 356: 12.6 CONTROL ELEMENTS Control Eleme
show all

Access Control Catalog 2017 - version 4.5.2 (EUR – FOB Madrid)

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?