You can buy any knife or you can own a real KA-BAR®

You can buy any knife or you can own a real KA-BAR®.
Leather Handled Fighting/Utility Knives............................. 2
Kraton G® Handled Fighting/Utility Knives........................ 6
The KA-BAR® is a field-use knife that we have been making since WWII.
Original Zombie® Knives............................................................ 12
These specifications are for our CURRENT production and reflect the
evolution and improvement of the knife design & materials over the years.
“The KA-BAR” is differential heat treated, with the tang being slightly softer than
the blade. We have used this heat-treat process since WWII to assure that even
under the punishing field conditions of battle, your KA-BAR will most likely bend
and not break, thus allowing continued use and not rendering the tool functionless.
While “The KA-BAR” is marked “USMC” on the pile side (or reverse side)
of the blade, for several years now we have also offered Olean-made
leather handled KA-BAR knives marked with “U.S.ARMY” and “USN”.
Blade Length: 7”
Overall Length: 11.875”
Approximate Weight: 0.7 lb
(weight is knife only)
Grind Extends
to Blood Groove
USMC Blade Mark
on Pile Side
Downward
Bent Guard
Distinct Oval
Shaped Handle
When you see this icon, know
that these KA-BARs are being
made by family, friends and
neighbors right here in the USA.
Pinned
Butt Cap
We wouldn’t tell you to buy a KA-BAR® knife because of
its military heritage or because it’s a legend in the world
of knives.
We wouldn’t tell you to buy a KA-BAR® because
it comes from an American company with more
than a century of knife-making experience.
And we wouldn’t tell you to buy a KA-BAR® knife because
of its resistance to corrosion, tested strength, unmatched
edge-holding ability and out-of-the-box razor sharp blade.
Because there’s only one real reason to buy a KA-BAR®.
When it comes down to it and you’re all alone and your
survival depends on a knife, you’re going to want a knife
you can trust. A knife that won’t fail you. A knife
that has proven itself time and time again.
You can buy any knife or you can own a KA-BAR®.
Heavy Cutting Tools.................................................................... 13
Dog’s Head Knives....................................................................... 14
Leather Handled Hunters.......................................................... 15
MULE Folders................................................................................. 16
G10 MULE Folders........................................................................ 17
Warthog Folders........................................................................... 18
Stainless Steel All-Purpose Knives........................................ 19
KBD Master Series Introduction............................................. 20
Becker Knife & Tool Designs.................................................... 22
Jarosz Knives.................................................................................. 26
TDI Law Enforcement / Hinderer Knives............................. 28
Dozier Designs............................................................................... 30
Snody Knives.................................................................................. 31
Johnson Adventure® Blades..................................................... 32
KA-BAR® Accessories................................................................. 34
Product Specifications............................................................... 36
Product Overview & Size Comparison Chart..................... 40
Warranty Information................................................................. 43
Knife Care, Storage & Sharpening.......................................... 43
NEW
High Carbon
Cro-Van Steel
(Easy Sharpening)
Smooth Black
Epoxy “Baked”
Powder Coating
KA-BAR/OLEAN NY
Blade Mark
Stacked Leather Washers
and Traction Grooves in Handle
Visible Rat Tail Tang
in Butt Cap
We are proud of our heritage and continue our legacy
with the KBD Master Series. The KBD Master Series is a
collection of KA-BAR® manufactured knives designed
and authenticated by the leading outdoorsmen, survivalists,
uniformed professionals and military experts in the U.S.
To see the KBD Master Series and our full product line
visit us at KA-BAR.com.
This symbol designates the latest products released over
the past twelve months. Visit KA-BAR.com all year long as
we continue to release new products on a regular basis.
For even more information, please visit our
YouTube and Vimeo channels where you
can find several videos authenticating
KA-BAR products against similar products.
When you see the Video Review icon, go to our YouTube
or Vimeo channels where you can see product videos
along with KBD Master Series interviews.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com

1217 USMC Leather Handled Fighting/Utility Knife
KA-BAR® Leather Handled Fighting/Utility Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
Presentation
Grade USMC
Brass/Gold Plated Butt Cap & Guard
USMC
Leather Sheath
USMC
Hard Plastic Sheath
USMC
Serrated
Leather Sheath
USMC
Serrated
Hard Plastic Sheath
U.S. ARMY
Serrated
Leather Sheath
Leather Sheath
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1215S-Leather-USMC
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1217S-Leather-USMC
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1217S-Leather-USMC
Pile Side Serration:
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Pile Side Serration:
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1220S-Leather-U.S.ARMY
Pile Side Serration:
Item: #1215
MSRP: $311.86
Item: #1217*
MSRP: $104.90
Item: #5017
MSRP: $114.45
Item: #1218*
MSRP: $104.90
Item: #5018
MSRP: $114.45
Item: #1219*
MSRP: $104.90
2 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 3

KA-BAR® Leather Handled Fighting/Utility Knives
KA-BAR® Leather Handled Fighting/Utility Knives
* Clam Pack available for these items.
Simply place a “CP” following the item
number when ordering. Sheaths denoted
with (MC) are MOLLE compatible.
U.S. ARMY
Serrated
Hard Plastic Sheath
U.S. ARMY
Leather Sheath
U.S. ARMY
Hard Plastic Sheath
USN
Leather Sheath
USN
Hard Plastic Sheath
USMC Short
Leather Sheath
USA Short
Leather Sheath
USMC Short
Serrated
Leather Sheath
USA Short
Serrated
Leather Sheath
Dog’s Head
Utility
Leather Sheath
Big Brother
Leather
Leather Sheath
Mark I
Leather Sheath
Designed in cooperation with
Strategic Edge Impact Global Enterprise
(S.E.I.G.E.) of Webster, NY
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Pile Side Serration:
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1220S-Leather-U.S.ARMY
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1225S-Leather-USN
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1250S-Leather-USMC
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1251S-Leather-U.S.A.
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1250S-Leather-USMC
Pile Side Serration:
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1251S-Leather-U.S.A.
Pile Side Serration:
Blade Length: 7”
Overall Length: 12”
Sheath: 1317S-Leather-Dog’s Head
Blade Length: 9.375”
Overall Length: 14.375”
Sheath: 2217S-Leather-U.S.A.
Top Edge Serration:
Blade Length: 5.125”
Overall Length: 9.375”
Sheath: 2225S-Leather-USN
Item: #5019
MSRP: $114.45
Item: #1220*
MSRP: $104.90
Item: #5020
MSRP: $114.45
Item: #1225*
MSRP: $104.90
Item: #5025
MSRP: $114.45
Item: #1250*
MSRP: $104.90
Item: #1251*
MSRP: $104.90
Item: #1252*
MSRP: $104.90
Item: #1261*
MSRP: $104.90
Item: #1317
MSRP: $96.76
Item: #2217
MSRP: $140.36
Item: #2225
MSRP: $99.90
KA-BAR® is unable to ship this item
to certain states including CA and MA.
4 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 5

1281 D2 Extreme Fighting/Utility Knife
KA-BAR® Kraton G® Handled Fighting/Utility Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
NEW
KA-BAR®
Neck Knife
Hard Plastic Sheath
KA-BAR®
Skeleton
Hard Plastic Sheath
Full Size
Black KA-BAR®
Leather Sheath
Full Size
Black KA-BAR®
Hard Plastic Sheath
Full Size
Black KA-BAR®
Serrated
Leather Sheath
Full Size
Black KA-BAR®
Serrated
Hard Plastic Sheath
Blade Length: 3.875”
Overall Length: 7.875”
Sheath: 1117S-Hard Plastic (MC)
Blade Length: 2.5”
Overall Length: 6.125”
Sheath: 1118S-Hard Plastic
Blade Length: 7”
Overall Length: 11.75”
Sheath: 1211S-Leather-KA-BAR®
Blade Length: 7”
Overall Length: 11.75”
Sheath: 1216S-Hard Plastic (MC)
Blade Length: 7”
Overall Length: 11.75”
Sheath: 1211S-Leather-KA-BAR®
Pile Side Serration:
Blade Length: 7”
Overall Length: 11.75”
Sheath: 1216S-Hard Plastic (MC)
Pile Side Serration:
Item: #1117
MSRP: $56.00
Item: #1118BP
MSRP: $11.59
Item: #1211*
MSRP: $96.36
Item: #1213*
MSRP: $102.07
Item: #1212*
MSRP: $96.36
Item: #1214*
MSRP: $102.07
6 I HARDCORE KNIVES. HARDCORE LIVES. KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 7

1257 Short
KA-BAR® Serrated
KA-BAR® Kraton G® Handled Fighting/Utility Knives
KA-BAR® Kraton G® Handled Fighting/Utility Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
Tanto
Hard Plastic Sheath
Short Tanto
Leather Sheath
Short Tanto
Hard Plastic Sheath
Short Tanto
Serrated
Leather Sheath
Short Tanto
Serrated
Hard Plastic Sheath
Short KA-BAR®
Leather Sheath
Short KA-BAR®
Hard Plastic Sheath
Short KA-BAR®
Serrated
Leather Sheath
Short KA-BAR®
Serrated
Hard Plastic Sheath
Fighter
Leather/Cordura® Sheath
Combat Kukri
Heavy-Duty Polyester Sheath
Blade Length: 8”
Overall Length: 12.8125”
Sheath: 1245S-Hard Plastic (MC)
Pile Side Serration:
Blade Length: 5.25”
Overall Length: 9.375”
Sheath: 1256S-Leather-KA-BAR®
Blade Length: 5.25”
Overall Length: 9.375”
Sheath: 5016S-Hard Plastic (MC)
Blade Length: 5.25”
Overall Length: 9.375”
Sheath: 1256S-Leather-KA-BAR®
Pile Side Serration:
Blade Length: 5.25”
Overall Length: 9.375”
Sheath: 5016S-Hard Plastic (MC)
Pile Side Serration:
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1256S-Leather-KA-BAR®
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 5016S-Hard Plastic (MC)
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 1256S-Leather-KA-BAR®
Pile Side Serration:
Blade Length: 5.25”
Overall Length: 9.25”
Sheath: 5016S-Hard Plastic (MC)
Pile Side Serration:
Blade Length: 8”
Overall Length: 12.8125”
Sheath: 1271S-Leather/Cordura®
Pile Side Serration:
Blade Length: 8”
Overall Length: 13.375”
Sheath: 1280S-Heavy-Duty
Polyester (MC)
Item: #1245*
MSRP: $102.07
Item: #1254*
MSRP: $77.38
Item: #5054
MSRP: $82.19
Item: #1255*
MSRP: $77.38
Item: #5055*
MSRP: $82.19
Item: #1256*
MSRP: $77.38
Item: #1258*
MSRP: $82.19
Item: #1257*
MSRP: $77.38
Item: #1259*
MSRP: $82.19
Item: #1271
MSRP: $99.10
Item: #1280
MSRP: $105.08
8 I HARDCORE KNIVES. HARDCORE LIVES. KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 9

KA-BAR® Kraton G® Handled Fighting/Utility Knives
5011 Full Size Foliage Green Fighting/Utility Knife
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
D2 Extreme
Nylon/Cordura® Sheath
D2 Extreme
Hard Plastic Sheath
D2 Extreme
Leather Sheath
KA-Fillet 6”
Hard Plastic Sheath
KA-Fillet 9”
Hard Plastic Sheath
Big Brother
Kraton G®
Leather Sheath
Designed in cooperation with
Strategic Edge Impact Global Enterprise
(S.E.I.G.E.) of Webster, NY
Mark I
Hard Plastic Sheath
Full Size
Foliage Green
Hard Plastic Sheath
Full Size
Foliage Green
Serrated
Hard Plastic Sheath
Blade Length: 7”
Overall Length: 11.875”
Sheath: 8017S-Nylon/
Cordura® (MC)
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1216S-Hard Plastic (MC)
Pile Side Serration:
Blade Length: 7”
Overall Length: 11.875”
Sheath: 1211S-Leather-KA-BAR®
Pile Side Serration:
Blade Length: 6.1875”
Overall Length: 10.8125”
Sheath: 1450S-Hard Plastic
Blade Length: 9.1875”
Overall Length: 13.75”
Sheath: 1451S-Hard Plastic
Blade Length: 9.375”
Overall Length: 14.375”
Sheath: 2211S-Leather-U.S.A.
Top Edge Serration:
Blade Length: 5.125”
Overall Length: 9.1875”
Sheath: 2221S-Hard Plastic (MC)
Blade Length: 7”
Overall Length: 11.75”
Sheath: 5011S-Hard Plastic (MC)
Blade Length: 7”
Overall Length: 11.75”
Sheath: 5011S-Hard Plastic (MC)
Pile Side Serration:
Pile Side
Serration:
Item: #1281
MSRP: $174.75
Item: #1282
MSRP: $168.15
Item: #1283
MSRP: $173.19
Item: #1450CP
MSRP: $35.79
Item: #1451CP
MSRP: $37.90
Item: #2211
MSRP: $131.73
Item: #2221
MSRP: $82.19
Item: #5011
MSRP: $102.07
Item: #5012*
MSRP: $102.07
Made from .165” D2 tool steel.
Made from .165” D2 tool steel.
Made from .165” D2 tool steel.
KA-BAR® is unable to ship this item
to certain states including CA and MA.
10 I HARDCORE KNIVES. HARDCORE LIVES. KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 11

KA-BAR® Original Zombie® Knives
1248 Cutlass Machete Heavy Cutting Tool
KA-BAR® Heavy Cutting Tools
Kharon
Tanto Folder
Blade Length: 3.375”
Open Length: 7.875”
Item: #5698
MSRP: $21.05
Features a reversible pocket clip
Acheron
Skeleton Knife
Hard Plastic Sheath
Famine Tanto
Nylon Sheath
War Sword
Nylon Sheath
Pestilence
Chopper
Nylon Sheath
Zomstro
Nylon Sheath
Swabbie
Nylon Sheath
Cutlass
Machete
Leather/Cordura® Sheath
Kukri
Machete
Leather/Cordura® Sheath
Heavy-Duty
Warthog
Leather/Cordura® Sheath
Blade Length: 3.125”
Overall Length: 6.375”
Sheath: 5699S-Hard Plastic
Blade Length: 7.5”
Overall Length: 13”
Sheath: 5700S-Nylon (MC)
Blade Length: 9.6875”
Overall Length: 15.25”
Sheath: 5701S-Nylon (MC)
Blade Length: 10.1875”
Overall Length: 15.75”
Sheath: 5701S-Nylon (MC)
Blade Length: 9.75”
Overall Length: 15.5”
Sheath: 5705S-Nylon (MC)
Blade Length: 12.5”
Overall Length: 18”
Sheath: 5706S-Nylon (MC)
Blade Length: 11”
Overall Length: 16.5”
Sheath: 1248S-Leather/Cordura®
Blade Length: 11.5”
Overall Length: 17”
Sheath: 1249S-Leather/Cordura®
Blade Length: 6.75”
Overall Length: 12.25”
Sheath: 1278S-Leather/Cordura®
Item: #5699BP
MSRP: $11.59
Item: #5700
MSRP: $82.11
Item: #5701
MSRP: $84.21
Item: #5702
MSRP: $84.21
Item: #5705
MSRP: $94.73
Item: #5706
MSRP: $96.84
Item: #1248
MSRP: $75.04
Item: #1249
MSRP: $75.04
Item: #1278
MSRP: $68.51
Bonus Blade - #5699 Knife Only
Bonus Set of Handles - ZK Green
Bonus Blade - #5699 Knife Only
Bonus Set of Handles - ZK Green
Bonus Blade - #5699 Knife Only
Bonus Set of Handles - ZK Green
Bonus Blade - #5699 Knife Only
Bonus Set of Handles - ZK Green
Bonus Blade - #5699 Knife Only
Bonus Set of Handles - ZK Green
12 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 13

6112CU Coopersmith Lockback Small
& 6199CU Coopersmith Lockback Large
KA-BAR® Dog’s Head Knives KA-BAR® Leather Handled Hunters
All KA-BAR® Leather Handled Hunters are sold with plastic lined Leather Sheaths.
#6112CU
#6199CU
#6576CU
Coppersmith
Lockback
Small
Coppersmith
Lockback
Large
Coppersmith
Trailing Point
Hunter
Leather Sheath
Little Finn
Leather Sheath
Hunter
Leather Sheath
Skinner
Leather Sheath
Game Hook
Leather Sheath
Marine Hunter
Leather Sheath
Bowie
Leather Sheath
Blade Length: 3”
Overall Length: 6.75”
Handle: Bone
Blade Length: 3.5”
Overall Length: 8.625”
Handle: Bone
Blade Length: 3.5”
Overall Length: 7.75”
Sheath: 3576S-Leather-Dog’s Head
Handle: Bone
Blade Length: 3.625”
Overall Length: 7”
Sheath: 1226S-Leather-KA-BAR®
Blade Length: 4”
Overall Length: 8.125”
Sheath: 1232S-Leather-KA-BAR®
Blade Length: 4.375”
Overall Length: 8.25”
Sheath: 1233S-Leather-KA-BAR®
Blade Length: 3.25”
Overall Length: 7.25”
Sheath: 1234S-Leather-KA-BAR®
Blade Length: 5.875”
Overall Length: 10.75”
Sheath: 1235S-Leather-KA-BAR®
Blade Length: 6.9375”
Overall Length: 11.8125”
Sheath: 1236S-Leather-KA-BAR®
Item: #6112CU
MSRP: $126.32
Item: #6199CU
MSRP: $170.21
Item: #6576CU
MSRP: $172.99
Item: #1226
MSRP: $43.51
Item: #1232
MSRP: $49.91
Item: #1233
MSRP: $55.77
Item: #1234
MSRP: $53.11
Item: #1235
MSRP: $67.52
Item: #1236
MSRP: $77.27
Features Brass Guard and
Aluminum Butt Cap
Features Brass Guard and
Aluminum Butt Cap
Features Brass Guard and
Aluminum Butt Cap
Features Brass Guard and
Aluminum Butt Cap
Features Brass Guard and
Aluminum Butt Cap
Features Brass Guard and
Aluminum Butt Cap
14 I HARDCORE KNIVES. HARDCORE LIVES. KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 15

3053 Desert MULE Folder 3063 G10 MULE Serrated
KA-BAR® MULE Folders
KA-BAR® G10 MULE Folders
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Black MULE
Polyester Sheath
Black MULE
Serrated
Polyester Sheath
Desert MULE
Polyester Sheath
G10 MULE
G10 MULE
Serrated
G10 MULE
Tanto
G10 MULE
Tanto Serrated
Blade Length: 3.875”
Open Length: 9.125”
Handle: Zytel®
Sheath: 3050S-Polyester-KA-BAR®
Blade Length: 3.875”
Open Length: 9.125”
Handle: Zytel®
Sheath: 3050S-Polyester-KA-BAR®
Blade Length: 3.875”
Open Length: 9.125”
Handle: Zytel®
Sheath: 3052S-Polyester-KA-BAR®
Blade Length: 3.9375”
Open Length: 9.25”
Handle: G10
Blade Length: 3.9375”
Open Length: 9.25”
Handle: G10
Blade Length: 3.9375”
Open Length: 9.25”
Handle: G10
Blade Length: 3.9375”
Open Length: 9.25”
Handle: G10
Item: #3050*
MSRP: $64.85
Item: #3051*
MSRP: $64.85
Item: #3053*
MSRP: $64.85
Item: #3062
MSRP: $33.58
Item: #3063
MSRP: $33.58
Item: #3064
MSRP: $33.58
Item: #3065
MSRP: $33.58
Features a reversible pocket clip
Features a reversible pocket clip
Features a reversible pocket clip
Features a reversible pocket clip
Features a reversible pocket clip
Features a reversible pocket clip
Features a reversible pocket clip
16 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 17

KA-BAR® Warthog Folders
1300 Original HOBO
KA-BAR® Stainless Steel All-Purpose Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
NEW
Warthog
Folder
Warthog
Folder
Serrated
Warthog
Tanto Folder
Warthog
Tanto Folder
Serrated
Original HOBO
Nylon Sheath
Fork, knife and spoon
pieces come apart.
Agama Folder
Gila Folder
Komodo Folder
Tegu Folder
KA-BAR Folder
Blade Length: 3”
Open Length: 7.5625”
Handle: G10
Blade Length: 3”
Open Length: 7.5625”
Handle: G10
Blade Length: 3”
Open Length: 7.5625”
Handle: G10
Blade Length: 3”
Open Length: 7.5625”
Handle: G10
Blade Length: 3”
Open Length: 6.6250”
Sheath: 1300S-Nylon
Blade Length: 3.625”
Open Length: 8.5”
Handle: G10
Blade Length: 3.875”
Open Length: 8.875”
Handle: G10
Blade Length: 3.5”
Open Length: 7.875”
Handle: G10
Blade Length: 2.875”
Open Length: 6.875”
Handle: G10
Blade Length: 3.875”
Open Length: 8.875”
Handle: G10
Item: #3072*
MSRP: $19.13
Item: #3073*
MSRP: $19.13
Item: #3074*
MSRP: $19.13
Item: #3075*
MSRP: $19.13
Item: #1300
Clam Pack #1301
MSRP: $24.64
Item: #3076
MSRP: $20.95
Item: #3077
MSRP: $20.95
Item: #3078
MSRP: $20.95
Item: #3079
MSRP: $20.95
Item: #3189
MSRP: $24.21
Features a pocket clip
Features a pocket clip
Features a pocket clip
Features a pocket clip
Features a pocket clip
Features a pocket clip
Features a pocket clip
Features a pocket clip
Features a reversible pocket clip
18 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 19

KBD Master Series
Ethan Becker
Becker Knife & Tool - Page 22
Jesse Jarosz
Jarosz Knives - Page 26
John Benner
Rick Hinderer
TDI / Hinderer Knives - Page 28
Bob Dozier
Dozier Designs - Page 30
Mike Snody
Snody Knives - Page 31
Steve Johnson
Adventure® Blades - Page 32
The KBD Master Series is a collection of KA-BAR®
manufactured knives designed and authenticated
by the leading outdoorsmen, survivalists, uniformed
professionals and military experts in the U.S.
KA-BAR® is pleased to
offer the Becker Knife &
Tool collection designed
by Ethan Becker, avid
outdoorsman and founder
of Becker Knife & Tool.
Since the early 1980s, the
Becker Knife & Tool brand
has become synonymous
with industrial-strength
tactical and survival
knives. Now as part of
the KBD Master Series,
the BK&T line is positioned
to expand on its versatility
of uses in combat and
field craft chores.
We are proud to add custom
knife-maker Jesse Jarosz to
our team of designers. Jesse
spent his childhood days
hunting, fishing, and trapping
in the Nebraska wilderness.
The Jarosz family has a
long and proud tradition of
working with their hands
to produce quality products,
from woodworking to general
carpentry. Jesse utilized his
family’s knowledge, work
ethic, and access to
equipment at a young age
to start making items of
his own. Jesse soon began
to make custom knives,
founding Jarosz Knives.
KA-BAR® proudly offers
the TDI/Hinderer knife
collection, a series of
design collaborations
between Tactical Defense
Institute President and
Chief Instructor, John
Benner, and custom-knife
maker, Rick Hinderer,
owner of Hinderer Knives.
Based on their combined
experiences as a veteran
police Lieutenant and
Fire Fighter/EMT, John
Benner and Rick Hinderer
have designed knives for
real-world emergency
situations, sure when
gripped and ambidextrous
for a multitude of mounting
and application options.
We are humbled to offer
several production versions
of Bob Dozier Knives as part
of the KBD Master Series. As
founder of his own company
for producing custom-made
knives, Bob Dozier has been
an icon in the knife making
community since the 1960s.
The Dozier designed
products are known for
clean, straight forward
lines. Their superb fit and
finish provide excellent
all-purpose utilitarianism
at a reasonable price.
We are delighted to
off er Snody Knives
designed by custom
knife maker, Mike Snody.
Mike prides himself on
producing world-class,
investment grade cutlery
for the most extreme,
discerning and demanding
knife collectors and
users on the planet.
KA-BAR® is excited to offer
Johnson Adventure® Blades
designed by Steve Johnson,
an industrial engineer by trade
and adrenaline junkie at heart.
The Adventure® knives
are built to withstand
abuse and never fail, even
in the most demanding
conditions like rugged
terrain and extreme
temperatures.
20 I HARDCORE KNIVES. HARDCORE LIVES. KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 21

BK16 Short Becker Drop Point
KBD Master Series - Becker Knife & Tool Designs
Sheaths denoted with (MC) are MOLLE compatible.
Becker
Campanion
Hard Plastic Sheath
Becker
Campanion
Heavy-Duty Polyester Sheath
Becker
Tac Tool
Hard Plastic Sheath
Becker
Magnum Camp
Heavy-Duty Polyester Sheath
Becker Combat
Utility
Heavy-Duty Polyester Sheath
Becker Combat
Bowie
Heavy-Duty Polyester Sheath
Becker
Crewman
Heavy-Duty Polyester Sheath
Becker
Reinhardt
Kukri
Polyester Sheath
Blade Length: 5.25”
Overall Length: 10.5”
Sheath: BK2S-Hard Plastic (MC)
Blade Length: 5.25”
Overall Length: 10.5”
Sheath: BK22S-Heavy-Duty
Polyester (MC)
Blade Length: 7”
Chisel ground with wire cutter
Overall Length: 12.5”
Sheath: BK3S-Hard Plastic (MC)
Blade Length: 8”
Overall Length: 13.5”
Sheath: BK7S-Heavy-Duty
Polyester (MC)
Blade Length: 7”
Overall Length: 12.75”
Sheath: BK7S-Heavy-Duty
Polyester (MC)
Blade Length: 9.25”
Overall Length: 14.75”
Sheath: BK9S-Heavy-Duty
Polyester (MC)
Blade Length: 5.5”
Overall Length: 11”
Sheath: BK10S-Heavy-Duty
Polyester (MC)
Blade Length: 13.25”
Overall Length: 18.75”
Sheath: BK21S-Polyester
Item: #BK2
MSRP: $117.95
Item: #BK22
MSRP: $121.76
Item: #BK3
MSRP: $154.93
Item: #BK5
MSRP: $84.21
Item: #BK7
MSRP: $131.75
Item: #BK9
MSRP: $144.27
Item: #BK10
MSRP: $121.76
Item: #BK21
MSRP: $200.28
Made from 0.25” 1095 Cro-Van steel
Made from 0.25” 1095 Cro-Van steel
Made from 0.25” 1095 Cro-Van steel
Made from 0.188” 1095 Cro-Van steel
Made from 0.188” 1095 Cro-Van steel
Made from 0.188” 1095 Cro-Van steel
Made from 0.188” 1095 Cro-Van steel
Made from 0.188” 1095 Cro-Van steel
22 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 23

KBD Master Series - Becker Knife & Tool Designs
BK&T Fastener Info
KBD Master Series - Becker Knife & Tool Designs
All current production Becker knives feature laser etched blade marks.
Sheaths denoted with (MC) are MOLLE compatible.
The standard fastener sizes for the handles
of the large Becker knives are as follows:
Cap Screws: 10 – 32x5/8”
Nuts: 10 – 32
The Allen Wrench used would be
either a 5/32 or 4mm.
For the Short Becker knives, the size
of the wrench is 9/64th.
The size of replacement cap screws are
8 - 32 x 1/2” and the nuts are 8 – 32
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
NEW
Becker
Necker
Hard Plastic Sheath
Becker
Remora
Hard Plastic Sheath
Becker
Eskabar
Hard Plastic Sheath
Short Becker
Drop Point
Cordura® Sheath
Becker
Skeleton Knife
Hard Plastic Sheath
Ultramid®
Becker
Handle Kit
for Full Size Becker knives
Micarta®
Becker
Handle Set
for Full Size Beckers knives
Micarta®
Becker
Handle Set
for Becker Neckers
Zytel®
Becker
Handle Kit
for Becker Eskabars
Micarta®
Becker
Handle Set
for Short Becker knives
G10 Becker
Handle Set
Belt Clip
Blade Length: 3.25”
Overall Length: 6.75”
Sheath: BK11S-Locking
Hard Plastic (MC)
Blade Length: 2.375”
Overall Length: 5.125”
Sheath: BK13S-Hard Plastic
Blade Length: 3.25”
Overall Length: 7”
Sheath: BK11S-Locking
Hard Plastic (MC)
Blade Length: 4.375”
Overall Length: 9.25”
Sheath: BK15S-Cordura® (MC)
Blade Length: 3.25”
Overall Length: 6.4375”
Sheath: BK23S-Hard Plastic
4-Pack of handles for
Full Size Becker knives:
• Blue
• Red
• Green
• Pink
Natural canvas Micarta® handle
set for Full Size Becker knives.
Green canvas Micarta® handle
set for Becker Neckers.
Kit includes one set each
Black & Blaze Orange Zytel®
handles for Becker Eskabars.
Green canvas Micarta® handle
set for Short Becker knives.
Contoured, textured G10
handles for Full Size Becker
knives. Made by VZ Grips.
The Becker Necker & Eskabar
sheaths are designed to work
with the TDI Metal Belt Clip.
#1480CLIP sold separately.
Item: #BK11*
MSRP: $62.38
Item: #BK13CP
MSRP: $37.05
Item: #BK14*
MSRP: $62.38
Item: #BK16
MSRP: $109.85
Item: #BK23BP
MSRP: $11.59
Item: #BKHNDLKIT
MSRP: $40.00
Item: #BK77HNDL
MSRP: $45.00
Item: #BK11HNDL
MSRP: $30.00
Item: #BK14HNDL
MSRP: $14.73
Item: #BK16HNDL
MSRP: $35.00
Item: #BK2VZ
MSRP: $55.00
Item: #1480CLIP
MSRP: $10.35
Made from 0.165” 1095 Cro-Van steel
Bonus: 550 Cord
Made from 0.125” 1095 Cro-Van steel
Made from 0.165” 1095 Cro-Van steel
Bonus: 550 Cord
Bonus Set of Handles - Brown
Fits maximum belt height of 1.75”
24 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 25

7502 Jarosz Globetrotter
KBD Master Series - Jarosz Knives
Sheaths denoted with (MC) are MOLLE compatible.
NEW
NEW NEW NEW NEW
NEW
Jarosz
Rambler
Skeleton
Hard Plastic Sheath
Jarosz
Globetrotter
Polyester Sheath
Jarosz
Turok
Celcon® Sheath
Jarosz
Folder
Jarosz
Tanto Folder
Jarosz
Choppa
Heavy-Duty Polyester Sheath
Blade Length: 2.5”
Overall Length: 6”
Sheath: 7001S-Hard Plastic
Blade Length: 3.5”
Overall Length: 7.5625”
Sheath: 7502S-Polyester (MC)
Blade Length: 6.25”
Overall Length: 11.5”
Sheath: 7503S-Celcon®
Blade Length: 3.5”
Overall Length: 8.0”
Handle: GFN
Blade Length: 3.5”
Overall Length: 8.0”
Handle: GFN
Blade Length: 9.875”
Overall Length: 15”
Sheath: 7507S-Heavy-Duty
Polyester (MC)
Item: #7001BP
MSRP: $11.59
Item: #7502
MSRP: $97.98
Item: #7503
MSRP: $117.90
Item: #7505
MSRP: $54.74
Item: #7506
MSRP: $54.74
Item: #7507
MSRP: $144.27
Made from 0.165” 1095 Cro-Van steel
Made from 0.188” 1095 Cro-Van steel
Features tip-up or
tip-down carry options
Features tip-up or
tip-down carry options
Made from 0.188” 1095 Cro-Van steel
26 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 27

1477CB Original TDI Half-Serrated
KBD Master Series - TDI Law Enforcement / Hinderer Knives
* Clam Pack available for these items. Simply place a “CP” following the item number when ordering.
Sheaths denoted with (MC) are MOLLE compatible.
TDI Belt Clip
Fits all TDI and TDI/Hinderer
fixed blade knives except
1478BP.
#1480CLIP sold separately.
Item: #1480CLIP
MSRP: $10.35
Fits maximum belt height of 1.75”
Original TDI
Half-Serrated
Hard Plastic Sheath/Belt Clip
Last Ditch
Knife
Hard Plastic Sheath
Original TDI
Hard Plastic Sheath/Belt Clip
Original TDI
Serrated
Hard Plastic Sheath/Belt Clip
Large TDI
Hard Plastic Sheath/Velcro® Straps
Large TDI
Tanto
Hard Plastic Sheath/Velcro® Straps
TDI/Hinderer
Hinderance
Locking Hard Plastic
Sheath/Belt Clip
TDI/Hinderer
Hell Fire
Locking Hard Plastic
Sheath/Belt Clip
TDI
Self-Defense
Cane
G10
TDI/Hinderer
Handle Grips
Blade Length: 2.3125”
Overall Length: 5.625”
Sheath: 1477S-Hard Plastic
w/ Belt Clip
Blade Length: 1.625”
Overall Length: 3.625”
Sheath: Hard Plastic
Blade Length: 2.3125”
Overall Length: 5.625”
Sheath: 1480S-Hard Plastic
w/ Belt Clip
Blade Length: 2.3125”
Overall Length: 5.625”
Sheath: 1480S-Hard Plastic
w/ Belt Clip
Blade Length: 3.6875”
Overall Length: 7.5625”
Sheath: 1482S-Hard Plastic
w/ Velcro® Straps (MC)
Blade Length: 3.6875”
Overall Length: 7.5625”
Sheath: 1482S-Hard Plastic
w/ Velcro® Straps (MC)
Blade Length: 3.5625”
Overall Length: 7.25”
Sheath: 2485S-Locking Hard
Plastic w/ Belt Clip
Blade Length: 3.5625”
Overall Length: 7.25”
Sheath: 2486S-Locking Hard
Plastic w/ Belt Clip
Overall Length 39”
Weight: 2.15 lb
0.100 thick 5052-H32
Aluminum Cane has a 1.0”
diameter and can be cut
shorter for fit.
Contoured, textured G10
handles for TDI/Hinderer
Hinderance and Hell Fire
knives. Made by VZ Grips.
Item: #1477CB*
MSRP: $55.24
Item: #1478BP
MSRP: $18.85
Item: #1480*
MSRP: $55.24
Item: #1481*
MSRP: $55.24
Item: #1482
MSRP: $65.25
Item: #1485
MSRP: $65.25
Item: #2485
MSRP: $103.42
Item: #2486
MSRP: $103.42
Item: #9406
MSRP: $127.65
Item: #2485VZ
MSRP: $40.00
Features a reversible belt clip
Features a reversible belt clip
Features a reversible belt clip
Features reversible Velcro® straps
Features reversible Velcro® straps
Features a reversible belt clip
Features a reversible belt clip
28 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 29

4065 Dozier Folding Thumb Notch 5103 Snody Snake Charmer
KBD Master Series - Dozier Designs
KBD Master Series - Snody Knives
#4062BL Blue
#4062BO Blaze Orange
#4062CB Coyote Brown
#4062FG Foliage Green
#4062PK Pink
#4062ZG ZK Green
#4072ZG ZK Green
NEW
Folding Hunter
Folding
Thumb Notch
Mini Dozier
Folder
Dozier
Skeleton
Hard Plastic Sheath
Snody Boss
Leather Sheath
Snody
Big Boss
Leather Sheath
Snody
Snake Charmer
Hard Plastic Sheath
Snody
Administrator
Hard Plastic Sheath
Blade Length: 3”
Open Length: 7.25”
Blade Length: 3”
Open Length: 7.25”
Blade Length: 2.25”
Open Length: 5.75”
Blade Length: 2.625”
Open Length: 6.375”
Sheath: 4073S-Hard Plastic
Blade Length: 3.5”
Overall Length: 6.5625”
Sheath: 5101S-JRE Leather
Blade Length: 4.5625”
Overall Length: 9”
Sheath: 5102S-JRE Leather
Blade Length: 2.3125”
Overall Length: 6.5”
Sheath: 5103S-Hard Plastic
Blade Length: 2”
Overall Length: 5.125”
Sheath: 5106S-Hard Plastic
Item: #4062
MSRP: $28.01
Item: #4065
MSRP: $28.01
Item: #4072
MSRP: $23.85
Item: #4073BP
MSRP: $11.59
Item: #5101
MSRP: $142.19
Item: #5102
MSRP: $195.79
Item: #5103
MSRP: $103.79
Item: #5106BP
MSRP: $11.59
Features a reversible
pocket clip & thumb stud
Features a reversible pocket clip
Features a reversible
pocket clip & thumb stud
Made from 0.125” S35VN stainless steel
Bonus Set of Purple Handles,
550 Cord & Bead
Made from 0.188” S35VN stainless steel
Bonus Set of Purple Handles,
550 Cord & Bead
Made from 0.125” S35VN stainless steel
Bonus Items: 550 Cord & Bead
30 I HARDCORE KNIVES. HARDCORE LIVES. KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 31

5600 Johson Adventure® Potbelly®
KBD Master Series - Johnson Adventure® Blades
Sheaths denoted with (MC)
are MOLLE compatible.
Adventure®
Piggyback®
Hard Plastic Sheath
Adventure®
Gamestalker®
Nylon Sheath
Adventure®
Wharnstalker®
Nylon Sheath
Adventure®
Potbelly®
Heavy-Duty Polyester Sheath
Adventure®
Parangatang®
Cordura® Sheath
Blade Length: 2.625”
Overall Length: 6”
Sheath: 5599S-Hard Plastic
Blade Length: 4.0625”
Overall Length: 8”
Sheath: 5602S-Nylon (MC)
Blade Length: 4.0938”
Overall Length: 8”
Sheath: 5602S-Nylon (MC)
Blade Length: 7.25”
Overall Length: 12.75”
Sheath: 5600S-Heavy-Duty
Polyester (MC)
Blade Length: 14.125”
Overall Length: 19.625”
Sheath: 5603S-Cordura® (MC)
Item: #5599BP
MSRP: $11.59
Item: #5602
MSRP: $61.06
Item: #5604
MSRP: $61.06
Item: #5600
MSRP: $84.21
Item: #5603
MSRP: $98.95
Made from 0.188” 440A stainless steel
Made from 0.188” 440A stainless steel
Made from 0.25” 1095 Cro-Van steel
Bonus Blade - #5599 Knife Only
Made from 0.188” 1095 Cro-Van steel
32 I HARDCORE KNIVES. HARDCORE LIVES. KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 33

9909 KA-BAR® Tactical Spork
KA-BAR® Accessories
KA-BAR® Accessories
#1431
#9915
#9914
#5700SIGN
#1437
NEW
KA-BAR®
Lake Effect
Ice Scraper
KA-BARLEY
Bottle Opener
KA-BAR®
Tactical
Spork
KA-BAR®
Playing Cards
KA-BAR®
Retro Posters
KA-BAR®
The Original
Zombie® Knife
Metal Sign
Dome
Presentation
Case
Walnut
Presentation
Case
Ultramid® ice scraper makes
short work of cleaning ice
off your windshield and can
be used alternately as a
self-defense tool.
Made of GFN-PA66 and
featuring the traditional
KA-BAR oval-shaped handle,
the KA-BARLEY makes light
work of prying off bottle caps.
Made from food and
water approved Grilamid.
Equipped with a fork/spoon
combo and has a 2.5”
serrated knife in the handle.
The Tactical Spork weighs 0.1 lb.
KA-BAR® playing cards are
reminiscent of decks issued
to soldiers during WWII, but
feature back art made famous
during the Afghanistan conflict.
Faces are custom-designed
and all cards are textured.
Inspired by World War II
propaganda posters, these
designs are perfect for your
dorm, work shop, home office
or man cave. Pack features
all four poster designs.
Each poster measures 24” x 30”.
Dimensions: 11” x 17”
Dimensions: 19” x 6.75” x 8”
Weight: 2.6 lb
Display any KA-BAR® up to 13”.
Knife sold separately.
Dimensions: 14.875” x 5.875”
Weight: 2.6 lb
Display any KA-BAR® up to 13”.
Item: #9906
MSRP: $8.32
Item: #9907
MSRP: $8.32
Item: #9909
MSRP: $8.32
Item: #9914
MSRP: $8.32
Item: #9915
MSRP: $20.00
Item: #5700SIGN
MSRP: $5.00
Item: #1431
MSRP: $96.53
Item: #1437
MSRP: $96.53
34 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 35

KA-BAR® Product Specification Chart
KA-BAR® Product Specification Chart
Item # Page MSRP
Bulk
Weight*
Overall/
Open Length
Blade
Length
Blade Stamp Steel Thickness Grind Angle HRC Lock Handle Sheath Mft’d
Item # Page MSRP
Bulk
Weight*
Overall/
Open Length
Blade
Length
Blade Stamp Steel Thickness Grind Angle HRC Lock Handle Sheath Mft’d
BK2 22 $117.95 1 10.5” 5.25” KA-BAR/BK&T 1095 Cro-Van 0.25 flat 20° 56-58 N/A Ultramid® BK2S USA
BK3 23 $154.93 1.3 12.5” 7" KA-BAR/BK&T 1095 Cro-Van 0.25 flat 20° 56-58 N/A Ultramid® BK3S USA
BK5 23 $84.21 0.75 13.5” 8” KA-BAR/BK&T 1095 Cro-Van 0.188 flat 20° 56-58 N/A Ultramid® BK7S USA
BK7 23 $131.75 0.85 12.75” 7" KA-BAR/BK&T 1095 Cro-Van 0.188 flat 20° 56-58 N/A Ultramid® BK7S USA
BK9 23 $144.27 1.05 14.75” 9.25” KA-BAR/BK&T 1095 Cro-Van 0.188 flat 20° 56-58 N/A Ultramid® BK9S USA
BK10 23 $121.76 0.75 11” 5.5” KA-BAR/BK&T 1095 Cro-Van 0.188 flat 20° 56-58 N/A Ultramid® BK10S USA
BK11 24 $62.38 0.2 6.75” 3.25” KA-BAR/BK&T 1095 Cro-Van 0.165 flat 20° 56-58 N/A 1095 Cro-Van BK11S USA
BK13CP 24 $37.05 0.1 5.125” 2.375” KA-BAR/BK&T 1095 Cro-Van 0.125 hollow 20° 55-57CR N/A 1095 Cro-Van BK13S USA
BK14 24 $62.38 0.15 7” 3.25” KA-BAR/BK&T 1095 Cro-Van 0.165 flat 20° 56-58 N/A 1095 Cro-Van BK11S USA
BK16 24 $109.85 0.4 9.25” 4.375” KA-BAR/BK&T 1095 Cro-Van 0.165 flat 20° 56-58 N/A Ultramid® BK15S USA
BK21 23 $200.28 1.4 18.75” 13.25” KA-BAR/BK&T 1095 Cro-Van 0.188 flat 20° 56-58 N/A Ultramid® BK21S USA
BK22 22 $121.76 1 10.5” 5.25” KA-BAR/BK&T 1095 Cro-Van 0.25 flat 20° 56-58 N/A Ultramid® BK22S USA
BK23BP 24 $11.59 0.15 6.4375” 3.25” KA-BAR/BK&T 5CR15 SS 0.125 hollow 18° 57-59 N/A 5CR15 SS BK23S CHINA
1117 7 $56.00 0.15 7.875” 3.875” KA-BAR 1095 Cro-Van 0.125 flat 20° 56-58 N/A 1095 Cro-Van 1117S USA
1118BP 7 $11.59 0.10 6.125” 2.5” KA-BAR 5CR15 SS 0.125 hollow 18° 57-59 N/A 5CR15 SS 1118S CHINA
1211 7 $96.36 0.7 11.75” 7" USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 1211S USA
1212 7 $96.36 0.7 11.75” 7" USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 1211S USA
1213 7 $102.07 0.7 11.75” 7" USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 1216S USA
1214 7 $102.07 0.7 11.75” 7" USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 1216S USA
1215 3 $311.86 0.7 11.875” 7" USMC 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1217S USA
1217 3 $104.90 0.7 11.875” 7" USMC 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1217S USA
1218 3 $104.90 0.7 11.875” 7" USMC 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1217S USA
1219 3 $104.90 0.7 11.875” 7" US ARMY 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1220S USA
1220 4 $104.90 0.7 11.875” 7" US ARMY 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1220S USA
1225 4 $104.90 0.7 11.875” 7" USN 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1225S USA
1226 15 $43.51 0.1 7" 3.625” KA-BAR DIN 1.4116 SS 0.094 hollow N/A 55-57 N/A Leather 1226S TAIWAN
1232 15 $49.91 0.2 8.125” 4" KA-BAR DIN 1.4116 SS 0.11 hollow N/A 55-57 N/A Leather 1232S TAIWAN
1233 15 $55.77 0.2 8.25” 4.375” KA-BAR DIN 1.4116 SS 0.11 hollow N/A 55-57 N/A Leather 1233S TAIWAN
1234 15 $53.11 0.2 7.25” 3.25” KA-BAR DIN 1.4116 SS 0.11 hollow N/A 55-57 N/A Leather 1234S TAIWAN
1235 15 $67.52 0.45 10.75” 5.875” KA-BAR DIN 1.4116 SS 0.125 hollow N/A 55-57 N/A Leather 1235S TAIWAN
1236 15 $77.27 0.45 11.8125” 6.9375” KA-BAR DIN 1.4116 SS 0.125 hollow N/A 55-57 N/A Leather 1236S TAIWAN
1245 8 $102.07 0.7 12.8125” 8" USA 1095 Cro-Van 0.165 hollow 20° 56-58 N/A Black Kraton G® 1245S USA
1248 13 $75.04 1.1 16.5” 11" KA-BAR 1085 Carbon 0.165 hollow N/A 52-54 N/A TPR 1248S TAIWAN
1249 13 $75.04 1.3 17" 11.5” KA-BAR 1085 Carbon 0.165 hollow 22° 52-54 N/A TPR 1249S TAIWAN
1250 4 $104.90 0.4 9.25” 5.25” USMC 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1250S USA
1251 5 $104.90 0.4 9.25” 5.25” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1251S USA
1252 5 $104.90 0.4 9.25” 5.25” USMC 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1250S USA
1254 8 $77.38 0.35 9.375” 5.25” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 1256S USA
1255 8 $77.38 0.35 9.375” 5.25” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 1256S USA
1256 9 $77.38 0.4 9.25” 5.25” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 1256S USA
1257 9 $77.38 0.4 9.25” 5.25” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 1256S USA
1258 9 $82.19 0.4 9.25” 5.25” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 5016S USA
1259 9 $82.19 0.4 9.25” 5.25” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 5016S USA
1261 5 $104.90 0.4 9.25” 5.25” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1251S USA
1271 9 $99.10 0.75 12.8125” 8" USA 1095 Cro-Van 0.165 hollow 20° 56-58 N/A Black Kraton G® 1271S USA
1278 13 $68.51 1.05 12.25” 6.75” KA-BAR 1085 Carbon 0.25 flat N/A 52-54 N/A TPR 1278S TAIWAN
1280 9 $105.08 0.9 13.375” 8" USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 1280S USA
1281 10 $174.75 0.75 11.875” 7" USA D2 0.188 flat 20° 59-60CR N/A Black Kraton G® 8017S USA
1282 10 $168.15 0.75 11.875” 7" USA D2 0.188 flat 20° 59-60CR N/A Black Kraton G® 1216S USA
1283 10 $173.19 0.75 11.875” 7" USA D2 0.188 flat 20° 59-60CR N/A Black Kraton G® 1211S USA
1300 19 $24.64 0.35 6.625” 3" KA-BAR 420j2 SS 0.078 flat 25° 52-54 lockback Stainless Steel 1300S CHINA
1317 5 $96.76 0.7 12” 7” KA-BAR/Dog’s Head 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1317S USA
1450CP 10 $35.79 0.25 10.8125” 6.1875” KA-BAR 440A SS 0.083 hollow N/A 55-57 N/A Black Kraton G® 1450S USA
1451CP 10 $37.90 0.25 13.75” 9.1875” KA-BAR 440A SS 0.083 hollow N/A 55-57 N/A Black Kraton G® 1451S USA
1477CB 28 $55.24 0.2 5.625” 2.3125” KA-BAR/TDI AUS 8A SS 0.125 hollow N/A 57-59CR N/A Coyote Brown Zytel® 1477CBS TAIWAN
1478BP 28 $18.85 0.15 3.625” 1.625” KA-BAR/TDI 9Cr18 SS 0.078 flat 18° 58-59CR N/A 9cr18 SS Included TAIWAN
1480 28 $55.24 0.2 5.625” 2.3125” KA-BAR/TDI AUS 8A SS 0.125 hollow N/A 57-59CR N/A Black Zytel® 1480S TAIWAN
1481 28 $55.24 0.2 5.625” 2.3125” KA-BAR/TDI AUS 8A SS 0.125 hollow N/A 57-59CR N/A Black Zytel® 1480S TAIWAN
1482 29 $65.25 0.4 7.5625” 3.6875” KA-BAR/TDI AUS 8A SS 0.188 hollow N/A 57-59CR N/A Black Zytel® 1482S TAIWAN
1485 29 $65.25 0.4 7.5625” 3.6875” KA-BAR/TDI AUS 8A SS 0.188 hollow N/A 57-59CR N/A Black Zytel® 1482S TAIWAN
2211 10 $131.73 0.9 14.375” 9.375” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 2211S USA
2217 5 $140.36 0.9 14.375” 9.375” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 2217S USA
2221 11 $82.19 0.5 9.1875” 5.125” USN 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 2221S USA
2225 5 $99.90 0.5 9.375” 5.125” USN 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 2225S USA
2485 29 $103.42 0.35 7.25” 3.5625” KA-BAR/TDI/Hinderer 1095 Cro-Van 0.188 flat 20° 56-58 N/A Ultramid® 2485S USA
2486 29 $103.42 0.35 7.25” 3.5625” KA-BAR/TDI/Hinderer 1095 Cro-Van 0.188 hollow 20° 56-58 N/A Ultramid® 2486S USA
3050 16 $64.85 0.45 9.125” 3.875” KA-BAR AUS 8A SS 0.125 hollow 20° 57-59CR lockback Black Zytel® 3050S TAIWAN
3051 16 $64.85 0.45 9.125” 3.875” KA-BAR AUS 8A SS 0.125 hollow 20° 57-59CR lockback Black Zytel® 3050S TAIWAN
New items are noted in bold • “Weight” indicates bulk knife weight in pounds. Does not include sheath or packaging. • Blade thicknesses noted are +/- .003 to .006. Olean-made US products were measured before processing.
Cro-Van = Chrome Vanadium • SS = stainless steel • CR = Cryogenically quenched stainless steel • TPR = Thermoplastic resin
New items are noted in bold • “Weight” indicates bulk knife weight in pounds. Does not include sheath or packaging. • Blade thicknesses noted are +/- .003 to .006. Olean-made US products were measured before processing.
Cro-Van = Chrome Vanadium • SS = stainless steel • CR = Cryogenically quenched stainless steel • TPR = Thermoplastic resin
36 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 37

KA-BAR® Product Specification Chart
KA-BAR® Product Specification Chart
Item # Page MSRP
Bulk
Weight*
Overall/
Open Length
Blade
Length
Blade Stamp Steel Thickness Grind Angle HRC Lock Handle Sheath Mft’d
Item # Page MSRP
Bulk
Weight*
Overall/
Open Length
Blade
Length
Blade Stamp Steel Thickness Grind Angle HRC Lock Handle Sheath Mft’d
3053 16 $64.85 0.45 9.125” 3.875” KA-BAR AUS 8A SS 0.125 hollow 20° 57-59CR lockback Desert Zytel® 3052S TAIWAN
3062 17 $33.58 0.6 9.25” 3.9375” KA-BAR 420 SS 0.125 hollow N/A 52-54 lockback G10 N/A CHINA
3063 17 $33.58 0.6 9.25” 3.9375” KA-BAR 420 SS 0.125 hollow N/A 52-54 lockback G10 N/A CHINA
3064 17 $33.58 0.6 9.25” 3.9375” KA-BAR 420 SS 0.125 hollow N/A 52-54 lockback G10 N/A CHINA
3065 17 $33.58 0.6 9.25” 3.9375” KA-BAR 420 SS 0.125 hollow N/A 52-54 lockback G10 N/A CHINA
3072 18 $19.13 0.3 7.5625” 3” KA-BAR 420 SS 0.11 hollow N/A 52-54 side lock G10 N/A CHINA
3073 18 $19.13 0.3 7.5625” 3” KA-BAR 420 SS 0.11 hollow N/A 52-54 side lock G10 N/A CHINA
3074 18 $19.13 0.3 7.5625” 3” KA-BAR 420 SS 0.11 hollow N/A 52-54 side lock G10 N/A CHINA
3075 18 $19.13 0.3 7.5625” 3” KA-BAR 420 SS 0.11 hollow N/A 52-54 side lock G10 N/A CHINA
3076 19 $20.95 0.3 8.5” 3.625” KA-BAR 420 SS 0.11 hollow N/A 50-52CR side lock G10 N/A CHINA
3077 19 $20.95 0.4 8.875” 3.875” KA-BAR 420 SS 0.11 hollow N/A 50-52CR side lock G10 N/A CHINA
3078 19 $20.95 0.3 7.875” 3.5” KA-BAR 420 SS 0.11 hollow N/A 50-52CR side lock G10 N/A CHINA
3079 19 $20.95 0.25 6.875” 2.875” KA-BAR 420 SS 0.11 hollow N/A 50-52CR side lock G10 N/A CHINA
3189 19 $24.21 0.35 8.875” 3.875” KA-BAR 420 SS 0.1 hollow N/A 52-54 lockback G10 N/A CHINA
4062 30 $28.01 0.15 7.25” 3" KA-BAR/DOZIER AUS 8A SS 0.11 hollow N/A 56-58CR lockback Black Zytel® N/A TAIWAN
4062BL 30 $28.01 0.15 7.25” 3" KA-BAR/DOZIER AUS 8A SS 0.11 hollow N/A 56-58CR lockback Blue Zytel® N/A TAIWAN
4062BO 30 $28.01 0.15 7.25” 3" KA-BAR/DOZIER AUS 8A SS 0.11 hollow N/A 56-58CR lockback Blaze Orange Zytel® N/A TAIWAN
4062CB 30 $28.01 0.15 7.25” 3" KA-BAR/DOZIER AUS 8A SS 0.11 hollow N/A 56-58CR lockback Coyote Brown Zytel® N/A TAIWAN
4062FG 30 $28.01 0.15 7.25” 3" KA-BAR/DOZIER AUS 8A SS 0.11 hollow N/A 56-58CR lockback Foliage Green Zytel® N/A TAIWAN
4062PK 30 $28.01 0.15 7.25” 3" KA-BAR/DOZIER AUS 8A SS 0.11 hollow N/A 56-58CR lockback Pink Zytel® N/A TAIWAN
4062ZG 30 $28.01 0.15 7.25” 3" KA-BAR/DOZIER AUS 8A SS 0.11 hollow N/A 56-58CR lockback ZK Green Zytel® N/A TAIWAN
4065 30 $28.01 0.15 7.25” 3" KA-BAR/DOZIER AUS 8A SS 0.11 hollow N/A 56-58CR lockback Black Zytel® N/A TAIWAN
4072 30 $23.85 0.05 5.75” 2.25” KA-BAR/DOZIER AUS 8A SS 0.11 hollow N/A 56-58CR lockback Black Zytel® N/A TAIWAN
4072ZG 30 $23.85 0.05 5.75” 2.25” KA-BAR/DOZIER AUS 8A SS 0.11 hollow N/A 56-58CR lockback ZK Green Zytel® N/A TAIWAN
4073BP 30 $11.59 0.15 6.375” 2.625” KA-BAR/DOZIER 5CR15 SS 0.125 hollow 18° 57-59 N/A 5CR15 SS 4073S CHINA
5011 11 $102.07 0.7 11.75” 7" USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Foliage Green Kraton G® 5011S USA
5012 11 $102.07 0.7 11.75” 7" USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Foliage Green Kraton G® 5011S USA
5017 3 $114.45 0.7 11.875” 7" USMC 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1216S USA
5018 3 $114.45 0.7 11.875” 7" USMC 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1216S USA
5019 4 $114.45 0.7 11.875” 7" US ARMY 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1216S USA
5020 4 $114.45 0.7 11.875” 7" US ARMY 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1216S USA
5025 4 $114.45 0.7 11.875” 7" USN 1095 Cro-Van 0.165 flat 20° 56-58 N/A Leather 1216S USA
5054 8 $82.19 0.35 9.375” 5.25” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 5016S USA
5055 8 $82.19 0.35 9.375” 5.25” USA 1095 Cro-Van 0.165 flat 20° 56-58 N/A Black Kraton G® 5016S USA
5101 31 $142.19 0.15 6.5625” 3.5” KA-BAR/Snody S35VN SS 0.125 flat 20° 58-62 N/A Zytel® 5101S USA
5102 31 $195.79 0.4 9” 4.5625” KA-BAR/Snody S35VN SS 0.188 flat 20° 58-62 N/A Zytel® 5102S USA
5103 31 $103.79 0.1 6.5” 2.3125” KA-BAR/Snody S35VN SS 0.125 hollow 20° 58-62 N/A S35VN SS 5103S USA
5106BP 31 $11.59 0.1 5.125” 2” KA-BAR/Snody 5CR15 SS 0.125 hollow 18° 57-59 N/A 5CR15 SS 5106S CHINA
5599BP 33 $11.59 0.05 6" 2.625” KA-BAR/”A” 5 Cr13 SS 0.11 flat 18° 52-54 N/A 5Cr13 SS 5599S CHINA
5600 33 $84.21 1.1 12.75” 7.25” KA-BAR/”A” 1095 Cro-Van 0.25 flat 20° 56-58 N/A GFN-PA66 5600S USA
5602 33 $61.06 0.25 8” 4.0625” KA-BAR/”A” 440A SS 0.188 hollow 20° 55-58 N/A GFN-PA66 5602S USA
5603 33 $98.95 1.3 19.625” 14.125” KA-BAR/”A” 1095 Cro-Van 0.188 flat 20° 56-58 N/A GFN-PA66 5603S USA
5604 33 $61.06 0.25 8” 4.0938” KA-BAR/”A” 440A SS 0.188 hollow 20° 55-58 N/A GFN-PA66 5602S USA
5698 12 $21.05 0.2 7.875” 3.375” KA-BAR/ZK AUS 8A SS 0.11 flat N/A 57-58 lockback GFN-PA66 N/A TAIWAN
5699BP 12 $11.59 0.05 6.375” 3.125” KA-BAR/ZK 5 Cr13 SS 0.11 hollow 18° 52-54 N/A 5 Cr13 SS 5699S CHINA
5700 12 $82.11 0.95 13” 7.5” KA-BAR/ZK/USA 1095 Cro-Van 0.188 flat 20° 56-58 N/A GFN-PA66 5700S USA
5701 12 $84.21 0.95 15.25” 9.6875” KA-BAR/ZK/USA 1095 Cro-Van 0.188 flat 20° 56-58 N/A GFN-PA66 5701S USA
5702 12 $84.21 1 15.75” 10.1875” KA-BAR/ZK/USA 1095 Cro-Van 0.188 flat 20° 56-58 N/A GFN-PA66 5701S USA
5705 12 $94.73 1.6 15.5” 9.75” KA-BAR/ZK/USA 1095 Cro-Van 0.25 flat 20° 56-58 N/A GFN-PA66 5705S USA
5706 12 $96.84 1.6 18” 12.5” KA-BAR/ZK/USA 1095 Cro-Van 0.25 flat 20° 56-58 N/A GFN-PA66 5706S USA
6112CU 14 $126.32 0.25 6.75” 3" KA-BAR 440C SS 0.11 flat N/A 56-58 lockback Bone N/A USA
6199CU 14 $170.21 0.25 8.625" 3.5” KA-BAR 440C SS 0.11 flat N/A 56-58 lockback Bone N/A USA
6576CU 14 $172.99 0.35 7.75” 3.5” KA-BAR 440C SS 0.14 hollow N/A 56-68 N/A Bone N/A USA
7001BP 27 $11.59 0.10 6” 2.5” KA-BAR/Jarosz 5 Cr13 SS 0.125 hollow 18° 57-59 N/A 5 Cr13 SS 7001S CHINA
7502 27 $97.98 0.40 7.5625” 3.5” KA-BAR/Jarosz 1095 Cro-Van 0.165 flat 20° 56-58 N/A Ultramid® 7502S USA
7503 27 $117.90 0.80 11.5” 6.25” KA-BAR/Jarosz 1095 Cro-Van 0.188 flat 20° 56-58 N/A Ultramid® 7503S USA
7505 27 $54.74 0.35 8” 3.5” KA-BAR/Jarosz AUS 8A 0.15 hollow 15° 56-58 lockback GFN N/A TAIWAN
7506 27 $54.74 0.30 8” 4.625” KA-BAR/Jarosz AUS 8A 0.15 hollow 15° 56-58 lockback GFN N/A TAIWAN
7507 27 $144.27 1.0 15” 9.875” KA-BAR/Jarosz 1095 Cro-Van 0.1875 flat 20° 56-58 N/A Ultramid® 7507S USA
New items are noted in bold • “Weight” indicates bulk knife weight in pounds. Does not include sheath or packaging. • Blade thicknesses noted are +/- .003 to .006. Olean-made US products were measured before processing.
Cro-Van = Chrome Vanadium • SS = stainless steel • CR = Cryogenically quenched stainless steel • TPR = Thermoplastic resin
New items are noted in bold • “Weight” indicates bulk knife weight in pounds. Does not include sheath or packaging. • Blade thicknesses noted are +/- .003 to .006. Olean-made US products were measured before processing.
Cro-Van = Chrome Vanadium • SS = stainless steel • CR = Cryogenically quenched stainless steel • TPR = Thermoplastic resin
38 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 39

KA-BAR® Product Overview & Size Comparison Chart
KA-BAR® Product Overview & Size Comparison Chart
The average
backpack measures
18” in height
18”
12”
The average
shoe size of an adult
male measures 10.5”
The average
household hammer
measures 13”
in height
The average
16.9 oz water bottle
measures 8”
in height
6”
The average
smart phone
measures 6” in height
1478BP 5106BP BK13CP 1477CB 7505 7506 4072 7001BP 5599BP 1118BP 5699BP BK23BP 5101 5103 6112CU BK11 4073BP BK14 1226 4062 4065 1234 2485 2486 1482 7502 3072 3074 5602 5604 2486 1117 3078 6576CU
5698 1232 1233 6199CU 3076 3189 3077 5102 3050 3064 3062 BK16 1250 1254 2221 BK2 1235 1450CP BK10 7503 1236 1211 1225 1281 1317 1278 1245
1480
1481
1485
3073 3075
3051
3053
3065 3063
1251
1252
1256
1257
1255
5054
5055
2225 BK22
1212
1213
1214
1215
5011
5012
5017
5018
1282
1283
1258
1259
1261
1217 5019
1218 5020
1219 5025
1220
40 I HARDCORE KNIVES. HARDCORE LIVES.
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 41

KA-BAR® Product Overview & Size Comparison Chart
KA-BAR® Warranty, Care and Storage
18”
12”
6”
LIMITED LIFETIME WARRANTY
KA-BAR Knives, Inc. (the “Company”) warrants, to the original purchaser of the knife only, that this knife will be free
from defects in material and craftsmanship under normal use and maintenance for the lifetime of the original purchaser.
This Limited Warranty does not apply to any failure of, defect in, or damage to the knife caused by neglect, normal wear
and tear, or by improper use, including throwing the knife, batoning with the knife, using the blades as a can opener,
chisel, pry bar, screwdriver, digging tool, or for any heavy work for which the knife was not designed.
If the knife fails to satisfy this Limited Warranty, the Company will repair or replace the knife or substitute a knife of
comparable value, at the Company’s option, and such repair, replacement or substitution shall constitute the sole remedy
for any failure of the knife to satisfy this Limited Warranty or any implied warranty (ies) of the Company. In order to
have a Limited Warranty claim evaluated by the Company, you must return the knife, at your own expense and risk, to
KA-BAR Knives, Inc., at 200 Homer Street, Olean, NY 14760, attention Customer Service Department. Please include with
the returned knife a brief written description of any claimed defect(s) in or failure(s) of the knife. Any returned knife
determined by the Company to not be eligible for repair, replacement or substitution under the terms of the
Limited Warranty will be returned to the Owner.
THE COMPANY MAKES NO EXPRESS WARRANTY OR REPRESENTATION WHATSOEVER OF OR WITH RESPECT TO
THE KNIFE OTHER THAN THE FOREGOING LIMITED WARRANTY, AND ALL SUCH OTHER EXPRESS WARRANTIES
ARE HEREBY EXPRESSLY EXCLUDED. ANY IMPLIED WARRANTIES OF THE COMPANY, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS, ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY.
THE COMPANY WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUEN-
TIAL DAMAGES, AND ALL SUCH DAMAGES ARE EXPRESSLY EXCLUDED.
Some states do not allow limitations on how long an implied warranty lasts, or exclusion or limitation
of incidental or consequential damages, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Caring for your KA-BAR®
Wipe blades after use with a dry, soft cloth.
If knives are exposed to salt water, wash with mild
dish detergent, rinse with tap water, then wipe with
a dry, soft cloth.
Storing
Treat blade with a light coating of mineral
oil before storing in a dry area separate from
its sheath. If possible, store in paper sleeve
provided with the knife at purchase.
Sharpening
Keep knives sharp by touching up edges as needed.
Most KA-BAR® knives can be sharpened using an
Arkansas stone or commonly available sharpening
system. Most knives can easily be touched up using
a coarse or hard stone.
When bringing back a very dull edge, a coarse
or hard stone should be used first, followed by
a finer, softer stone.
Knives made with D2 steel require diamond or
ceramic sharpeners. Knives should at no time be
sharpened on a belt sander or bench grinder.
These machines ruin a factory-sharpened edge.
BK3 5600
BK7 1271 5700 1280 BK5 1451CP 2211 BK9 7507 5701 5705 5702
1248 1249 5706
BK21 5603 1279
2217
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 42
KA-BAR® Knives, Inc. • 800-282-0130 • info@ka-bar.com • KA-BAR.com I 43

Manufacturer Representatives for KA-BAR® Dealers and Distributors
Alabama, Connecticut, D.C., Delaware, Florida,
Georgia, Kentucky, Maine, Maryland, Massachusetts,
Mississippi, New Hampshire, New Jersey, New York,
Pennsylvania, Rhode Island, Vermont, Virginia,
and West Virginia
Jones and Company, Inc.
7806 S.W. Ellipse Way
Stuart, FL 34997-7209
772-221-0100
Fax: 772-221-2266
Arkansas, Louisiana, Oklahoma, and Texas
Laylock and Associates
1050 E. 2nd Street #167
Edmond, OK 73034-5313
405-715-2764
Fax: 405-715-4963
Alaska, Arizona, California, Colorado, Hawaii, Idaho,
Montana, Nevada, New Mexico, Oregon, Utah,
Washington, and Wyoming
Owen J. Brown and
Associates
15235 Brand Boulevard No. A-106
Mission Hills, CA 91345
818-365-4822
Fax: 818-365-8622
Illinois, Iowa, Kansas, Michigan, Minnesota, Missouri,
Nebraska, North Dakota, South Dakota and Wisconsin.
Proactive Sales & Marketing
15880 Blue Mound Road
Valley Falls, KS 66088-5183
785-945-6689
Fax: 785-945-6863
Indiana and Tennessee
V&R Sales, Inc.
3365 Sheila Circle
White Pine, TN 37890-3603
606-434-9146
Fax: 866-834-5490
Military and Contracting
Rocket Sales
2108 S. FM 113, PO Box 249
Millsap, TX 76066-2204
940-682-4501
Fax: 940-682-4109
North Carolina, Ohio, South Carolina
and International Sales
KA-BAR®
200 Homer Street
Olean, New York 14760
800.282.0130
Fax: 716.790.7188
info@ka-bar.com
KA-BAR.com
KABAR CATALOG - 2017
6 17717 09999 1