Swing Gates, Swing Gates Sydney, Automatic Swing Gates

2/7/2017 Swing Gates, Swing Gates Sydney, Automatic Swing Gates
Contact Phone:1300 288 667
HOME
Automatic Entrances
Sliding Gates
Swing Gates
Boom Gates
Cantilever Gates
Automatic Doors
Rapid Roller Door
Garage Doors
Sectional Garage Doors
Roller Garage Doors
Intercoms
Accessories
Remotes and Receivers
Keypads and Card Readers
Lights
Bollards
Hardware
Company Profile
Automatic Entrances
FAQ’s
Contact Us
News
Swing Gates
You are here:
Home > Swing Gates
Swing Gates Range
https://abagate.com.au/automatic­entrance­range/swing­gates/ 1/7

2/7/2017 Swing Gates, Swing Gates Sydney, Automatic Swing Gates
OBBI External Automatic Swing Gate System
The OBBI geared motor has been designed according to the traditional basic concept of the ring / worm
screw reduction gear. Its structure houses a motor, a gear, the worm screw and an unlocking system. The
OBBI system is suitable for moving even gates with very small pillars. Voltage: 24 V DC
The operation of the motor causes the rotation of the ring and thus of the worm screw, which is
contained in a compact casing made of anodized aluminium, which in turn causes the movement of the
gate leaf via the front connection.
The very slim structure of the actuator allows it to be integrated exceptionally well with the gate, and
enables it to be assembled very easily.
The geared motor has a considerable stroke and an opening angle of up to 110°. In the case of power failure,
manual operation is always possible by unlocking the gear with a key, or automatic operation if a control panel
with batteries is installed.
Features:
High safety guaranteed by 24V DC power supply to geared motor
Very elegant and simple design
Download Brochure
https://abagate.com.au/automatic­entrance­range/swing­gates/ 2/7

2/7/2017 Swing Gates, Swing Gates Sydney, Automatic Swing Gates
LUXO Swing Gate Systems
Elegant and refined, Luxo was born to be admired and desired.
Its modern and futuristic structure is characterised by a soft combination of round and smooth forms, it is
suitable for any type of gate frame.
It has been designed to comply with the most solid and reliable DITEC mechanisms.
Aluminium, the noble material it is made of, makes it look light and clean; this feature will last in time despite
bad climatic conditions.
Features:
No problem in case of power failure due to manual lock release
Easy installation
Wires located in a specially designed raceway to avoid scratching, torsion and wear during operation.
All fixing screws made of stainless steel to be weatherproof.
3BH – 300kg each
5BH – 500kg each
Download Brochure
https://abagate.com.au/automatic­entrance­range/swing­gates/ 3/7

2/7/2017 Swing Gates, Swing Gates Sydney, Automatic Swing Gates
Articulated Arm Automations for Swing Gates
The most appropriate words to describe Facil automations are ease of use and flexibility. Irreversible
electromechanical automations for swing gates, they are the ideal solutions for heavy duty applications. Quiet
and sturdy, they are easy to install and can be connected to any applications, however complex, such as wings
supported by very large or out­of­plumb pillars.
Facil have been designed to ensure ease of installation and connection, as well as suitability to use with
different types of motor and its practicality.
For both actuators, the ABS guard ensures a good weather resistance and boasts high quality and elegant
finishes, simple and clean lines, and perfectly blends to any type of entrance.
Facil has also been design to accommodate a cord­operated release system and a reduction unit disconnected
indication microswitch The automation comes complete with adjustable mechanical stops.
Features:
FACIL:
For gate wings up to 2.3m
Manual release easily accessible in case of power failure
Open /close mechanical stops as standard
24v version available with option of battery back­up
Download Brochure
ARC External Automatic System
If the gate’s support pillars are of large dimensions or if the wings are “out of plumb”, the suitable automations
are ARC models: geared motors with articulated arm motion transmission, capable of effectively solving even
the most complex technical problems.
Available in 24v DC.
https://abagate.com.au/automatic­entrance­range/swing­gates/ 4/7

2/7/2017 Swing Gates, Swing Gates Sydney, Automatic Swing Gates
This system has been specially designed to move any type of gate without having to modify its structure.
The system is very practical and gates can be motorized even in peculiar conditions or difficult installations
due to very large pillars or out of plumb wings.
Its installation is very simple and can be done by fitting the geared motor to the pillar, laterally to the wing to
be activated and by connecting the articulated arm between the geared motor’s lower shaft and the adjustable
profile fastened to the door.
The design is very essential and simple. Its contemporary colours allow it to blend in with both modern and
traditional looking gates.
Features:
Very easy installation
Single solution for right­hand and left­hand leaves
Start­up at maximum power (MPS)*
Adjustable obstacle detection (ODS)*
Stroke with adjustable brake (DC)*
*with LOGIC control panels
Cubic 6H
If you prefer “hidden” versions, the ideal models are CUBIC geared motors that, housed under the gate,
reliably open the gate to which they are secured.
CUBIC is an underground, electromechanical system specially designed to “invisibly” move any type of
swing gate or main door with no need to install external actuators onto the gate or post.
The system is composed of a strong geared motor, housed in a foundation casing beside the gate pier;
this geared motor, through a special kynematic group or gear system, causes the rotation of the gate leaf.
Should a failure occur, the gate can be manually opened or closed by releasing the geared motor
mechanism by using an extended key control or powering the geared motor (DC) with batteries.*
The “concealed” solution allows the movement of valuable gates, both modern and traditional, without
modifying their aesthetics.
https://abagate.com.au/automatic­entrance­range/swing­gates/ 5/7

2/7/2017 Swing Gates, Swing Gates Sydney, Automatic Swing Gates
Features:
“Totally Concealing” system
Possible gate leaf opening up to 180°
Gate leaf adjustable speed (DC)*
Starting at max power (MPS)*
Adjustable obstacle detection (ODS)*
Stainless Steel embedding box optional
*with LOGIC control panels
Download Brochure
Products
Sliding Gates
Swing Gates
Cantilever Gates
Boom Gates
Automatic Doors
Garage Doors
Rapid Roller Door
Intercoms
Accessories
Get A Quote
Name:*
Email:*
Phone Number*
Subject:*
Sliding Gates
Address*
Suburb*
State*
Message:*
https://abagate.com.au/automatic­entrance­range/swing­gates/ 6/7

2/7/2017 Swing Gates, Swing Gates Sydney, Automatic Swing Gates
Submit
© Copyright 2016. aba automatic entrance specialists
SEO Agency Optimised
https://abagate.com.au/automatic­entrance­range/swing­gates/ 7/7