k HAM contains an internal fan & heat sink <strong>for</strong> <strong>the</strong>rmal management k HPM & HSM offer temperature control circuitry in addition to an internal fan & heat sink Recommended Option To achieve a higher level of control over your HAM parameters, we recommend Options X16 (external 12 pot) and X22 (internal 3/4 pot). See page 51 <strong>for</strong> in<strong>for</strong>mation on our wide selection of X options. HIGH POWER DIODE LASER MODULES High power CW laser modules CW OPERATION HAM Our HAM, HPM, and HSM modules have a typical operating current greater than 500mA. These units are excellent choices <strong>for</strong> any number of power-hungry High <strong>Power</strong>, CW— HAM & HPM Ø 1.75 IN Ø 1.75 IN 9.790 IN 7.87 IN applications, including high-resolution printing, imaging, illumination, and biomedical analysis. HAM <strong>Laser</strong> Modules: The HAM is designed <strong>for</strong> use with high power laser diodes with current requirements over 500mA. The HAM operates in ei<strong>the</strong>r constant current or automatic power control mode, depending on <strong>the</strong> type of diode selected. For effective <strong>the</strong>rmal management, <strong>the</strong> unit also contains an internal fan and heat sink. HPM & HSM <strong>Laser</strong> Modules: In addition to <strong>the</strong> internal fan and heat sink used by <strong>the</strong> HAM, our HPM and HSM modules incorporate an active temperature control circuit <strong>for</strong> those laser diodes with a built-in <strong>the</strong>rmoelectric cooler. The HPM offers 1000mA of drive current, while <strong>the</strong> HSM features 2000mA. Both units operate in ei<strong>the</strong>r constant current or automatic power control mode, depending on <strong>the</strong> type of diode selected. *See pages 46 through 52 <strong>for</strong> our available options and accessories. HSM MODULE SPECIFICATIONS HAM HPM HSM Dimensions, Ø x L, in. [mm] 1.75 x 7.87 [44.45 x 199.90] 1.75 x 7.87 [44.45 x 199.90] 1.75 x 9.79 [44.45 x 248.67] Operating Voltage (VDC) 12 ± .25 12 ± .25 12 ± .25 Max. Operating Current (mA) 2400 3200 4200 Max. <strong>Laser</strong> Drive Current (mA) 2000 1000 2000 Physical <strong>Diode</strong> Compatibility 9mm, TO-3, C Block TO-3 with TEC TO-3 with TEC <strong>Diode</strong> Compatibility M-type, N-type, & 4-pin in APC, all in CC M-type, N-type, & 4-pin in APC, all in CC M-type, N-type, & 4-pin in APC, all in CC Recommended Options* D1, D2, X12, X16, X22, X26 D1, D2 X12, X16, X22, X26 Mounting Bracket PH 501.407.0712 / FAX 501.407.0036 / sAles@<strong>Power</strong>tecHnology.com / www.<strong>Power</strong>tecHnology.com
ml series Pulsed laser modules .....................................38 Ilc & IPc series Pulsed laser modules ............................39