Laser Diode Products for the OEM - Power Technology, Inc.

Recommendations

Info

Safety k Never look directly into the laser beam. k Take precaution to eliminate exposure to direct or reflected laser light. k Operate the laser in a safe, controlled area. Handling k Do not adjust the focus on lasers operating in automatic power control mode at full power. k When laser diodes are present, do not operate equipment that may generate high frequency electrical surges. k Do not touch the laser lens, as contamination and scratches may result in distortion & decreased output power. GENERAL INFORMATION CDRH, Safety, & Handling Center For Devices & Radiological Health— The United States Food and Drug Administration’s Center for Devices and Radiological Health (CDRH) is the agency responsible for enforcing federal regulations regarding radiation-emitting devices in the U.S. Because laser light is a form of radiation, it is monitored by CDRH, and we at Power Technology, Inc. have an obligation to the government, to ourselves, and, most importantly, to our customers to ensure that OI_PPMT.doc January 2006 Page 5 of 6 our products adhere to these regulations. Protecting consumers and complying with federal guidelines are our Warranty top and priorities. Repair Return Policy Class 2M Laser: No return of merchandise will be accepted by PTI without an RMA (Return Material Authorization) number, Laser Radiation, Do not stare into issued by the The factory and Code prominently of displayed Federal on the return package. Regulations (CFR) is the set of government guidelines set forth by the beam CDRH or view directly that with No return shipments will be accepted “Collect” or “COD”. On warranty returns, PTI will pay for shipping optical instruments charges on the return of merchandise to the customer. manufacturers of various products must follow. Specifically, guidelines 21 CFR 1040.10 and 1040.11 When contacting the factory for an RMA number, please have the following information available: model Component number, serial number(s), and a description of the problem. detail the standards that all laser products must meet. To comply with federal regulations, all laser system Laser Safety manufacturers Class 3b and 4 lasers are not intended must for use ensure in surveying, leveling, that alignment, their or medical products applications. contain mandated safety features, register their products Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. System with Caution: CDRH, The use of optical and instruments properly with this product label will increase each eye hazard. device with its respective warning data. Do not shine laser in the direction of other people or at reflective surfaces that might cause exposure to the human eye. Do not mount the laser at eye level. Laser products are regulated by CDRH based on the level of radiation emitted at a particular wavelength. Modifications that affect any aspect of the product’s performance or intended functions will require recertification and re-identification of the product in accordance with the provisions of 21CFR 1040.10 and They 1040.11. A are copy of 21CFR grouped 1040.10 and 1040.11 into can specific be downloaded from classes www.powertechnology.com. according OI_PPMT.doc to their maximum January emission 2006 level. Page 6 of 6 The product labels shown below can typically be found near the output optics. Class 1 Laser: Class 1 Laser Product Component System One of the above labels is attached to the laser head. Class 1M Laser: Laser Radiation, Do not view directly with optical instruments Component System One of the above labels is attached to the laser head. Class 2 Laser: Laser Radiation, Do not stare into beam Component System One of the above labels is attached to the laser head. Please note that OEM laser products are subject to radiation different requirements than those applicable to laser Component systems. Because we are primarily a manufacturer of products designed for incorporation into a customer’s end-product, a number of our units do not include government mandated safety features. The original equipment manufacturer is responsible for incorporating System safety features to meet CDRH guidelines. Copyright 2005 Power Technology Inc. Laser Diode Control Unit— Class 2M Laser: Laser Radiation, Do not stare into the beam or view directly with optical instruments Component System One of the above labels is attached to the laser head. Class 4 Laser: Laser radiation, Avoid eye or skin exposure to direct or scattered One of the above labels is attached to the laser head. Class 3R Laser: Laser Radiation, Avoid direct eye exposure The Laser Diode Control Unit (LDCU) is a turnkey power source that enables us to offer OEM laser products as complete laser systems. The LDCU incorporates a number of CDRH mandated safety features, including an emission indicator and 5-second activation delay, to bring end users into compliance with U. S. government regulations. Original equipment manufacturers are responsible for integrating their own safety features to meet government standards. See page 52 to learn more about the LDCU. PH 501.407.0712 / FAX 501.407.0036 / sAles@PowertecHnology.com / www.PowertecHnology.com Component System One of the above labels is attached to the laser head. Copyright 2005 Power Technology Inc. Class 3B Laser: Laser Radiation, Avoid exposure to beam Component System One of the above labels is attached to the laser head. OI_PPMT.doc January 2006 One of the above labels is attached to the laser head. Class 4 Laser: Laser radiation, Avoid eye or skin exposure to direct or scattered radiation Component System One of the above labels is attached to the laser head. Class 3R Laser: Laser Radiation, Avoid direct eye exposure Component System One of the above labels is attached to the laser head. Copyright 2005 Power Technology Inc.
To meet the needs of our international customers, we give you the opportunity to work with a local distributor. Our network of international Afgen (PTY) Ltd. John Anderson P. O Box 70144 Bryanston 2021, South Africa Ph: 011-27114662055 Fax: 011-27114662136 Email: afgen@iafrica.com Territory: South Africa Ben Moshe Anna Kiselev 64, Arlozorov St., Ramat Gan P.O. Box 18125 Tel Aviv 61181, Israel Ph: 011-97236700007 Fax: 011-97236727319 Email: bms@shani.net Territory: Israel Cheos Kim Grundstrom Sinimaentie 10 C FIN-02630 Espoo, Finland Ph: 011-3580201986464 Fax: 011-3580201986465 Email: kim.grundstrom@cheos.fi Territory: Finland EIE Proces Keld Raaberg Torbenfeldvej 2 DK-2665 Vallensbaek Strand, Denmark Ph: 011-4543533885 Fax: 011-4543533886 Email: eieproces@eieproces.dk Territory: Denmark Japan Laser Corporation Junji Nakayama Shinjuku-Ku Tokyo, Japan 169 Ph: 011-81352850861 Fax: 011-81352850860 Email: nakayama@japanlaser.co.jp Territory: Japan Korea Lasertronix, Inc. Joo-Yong Lee 2nd Fl., 773-12 Yeoksam-Dong, Kangnam-Ku Seoul 135-080, Korea Ph: 011-8225539521 Fax: 011-8225579024 Email: jylee@korealasertronix.com Territory: Korea Laser 2000 Benelux C.V. Neth Bart Hengsdijk P. O. Box 20 3645 ZJ Vinkeveen Voorbancken 13A, Netherlands Ph: 011-31297266191 Fax: 011-31297266134 Email: hengsdijk@laser2000.nl Territory: Belgium, Netherlands, Luxembourg GENERAL INFORMATION Distributor Information distributors offer you the convenience of dealing with a representative in your own time zone, the satisfaction of working with a trained professional, and the comfort of speaking with someone in a familiar language. Laser 2000 AB Sweden Richard Arbus P.O. Box 799 S-60117 Norrkopping, Sweden Ph: 011-46-11 3696811 Fax: 011-46-11 369689 Email: richard.arbus@laser2000.se Territory: Sweden Laser 2000 Italia Beate Sauter Via Vetulonia 22 I - 00183 Rome, Italy 78860 St.-Nom la Bretche, France Ph: 011-39 340-7879-995 Email: beate.sauter@laser2000-italia.it Territory: France Laser 2000 SA Laurent Greulich Parc d’affaires 3, Rue De La Plaine 78860 St.-Nom la Bretche, France Ph: 011-33130801696 Fax: 011-33130800040 Email: greulich@laser2000.fr Territory: France Laser 2000 UK Alan Hughes Britannia House, Denford Road Ringstead, Northants NN144DF, UK Ph: 011-441933461666 Fax: 011-441933461699 Email: alanh@laser2000.co.uk Territory: UK Photonic Solutions PLC Douglas Neilson Gracemount Business Pavilions 40 Captains Rd., Unit A2/A3 Edinburgh, EH17 8QF, UK Ph: 011-441316648122 Fax: 011-441316648144 Email: doug@psplc.com Territory: UK W. Tverdal Werner Tverdal Postboks 88 N-3441 Royken, Norway Ph: 011-4731284733 Fax: 011-4731286018 Email: wtverdal@w-tverdal.no Territory: Norway Zugo Photonics Private Ltd. Wendy Lee 55 Kaki Bukit View Kaki Bukit Techpark II Singapore 415976 Ph: 011-65-844 0055 Fax: 011-65-6844 0655 Email: wendy_lee@zugo.com.sg Territory: Singapore PH 501.407.0712 / FAX 501.407.0036 / sAles@PowertecHnology.com / www.PowertecHnology.com
Page 1 and 2:
Laser Diode Products for the OEM
Page 3 and 4:
Symbol Key— NEW Coming ANALOG M O
Page 5 and 6:
NEW We understand the importance of
Page 7 and 8:
The following is a sampling of the
Page 9 and 10:
Blue, Violet, & Ultraviolet Diode l
Page 11 and 12: IQ2C SPECIALTY PRODUCTS Blue, Viole
Page 13 and 14: DTL-317 Head 2.953 IN CW DTL Power
Page 15 and 16: Q-switched DTL Laser Systems— Gre
Page 17 and 18: Super Luminescent Light Emitting Di
Page 19 and 20: IQ Head Dual Beam Combiner TE Coole
Page 21 and 22: Our infrared viewers are excellent
Page 23 and 24: self-contained cw laser modules ...
Page 25 and 26: RS PPM DIODE LASERS WITH BASIC OPTI
Page 27 and 28: PMT SPMT 0.430 IN 2.00 IN 0.880 IN
Page 29 and 30: PMA 2.650 IN Ø 1.000 IN Our analog
Page 31 and 32: optical correction methods ........
Page 33 and 34: ACM APM 2.250 IN Ø 0.999 IN Circul
Page 35 and 36: High Power cw laser modules .......
Page 37 and 38: ml series Pulsed laser modules ....
Page 39 and 40: ILC IPC Ø 1.000 IN 4.000 IN Ø 1.0
Page 41 and 42: Head Assemblies & transmission line
Page 43 and 44: LDP201 1.100 IN LDP214 1.010 IN 0.4
Page 45 and 46: 1.330 IN 0.880 IN 0.475 IN COMPONEN
Page 47 and 48: options ...........................
Page 49 and 50: D Option: Digital Control (Continue
Page 51 and 52: Heat Sink 1.930 IN Heat Sink With F
Page 53 and 54: T11 Beam Expander 3.65 IN [MAX] OPT
Page 55 and 56: LSEW-LFO-___ LSEW-SFO-___ LSEW-UFO-
Page 57 and 58: technical terms ...................
Page 59 and 60: How to Build Model Numbers— The c
Page 61: For your convenience, simply pho- t
show all

Laser Diode Products for the OEM - Power Technology, Inc.

Create successful ePaper yourself

Delete template?

Save as template?