Datasheet Hybrid target system MicroT1-TwinBeam - Rheinmetall ...

Hybrid target system MicroT1-TwinBeam
red dot sight and tactical target laser
By creating a combination of well proven elements a hybrid
system was created which incorporates the advantages of a
passive and an active target system in a compact and
unique package. The MTB Hybrid target system consists of
an aimpoint MicroT1 red dot sight and an ILEE TwinBeam
tactical laser and is the ultimate tool to aim with ease and
precision in day or night time and in any weather condition.
The Hybrid MTB is also a truly unique tool for rapid deployment
forces and special police units which rely on a full
battlefield illumination in the dark when active with NVG’s
indoors or outdoors in an urban environment.
For use in daylight the Aimpoint MicroT1 red dot sight is
used to aim at the target quickly and precisely. The Aimpoint
MicroT1 passive red dot collimator reflex sight is equal in
quality and use to any other aimpoint red dot sight. Due to
the specially coated optics the operation in daylight and
compatibility with NVG is ascertained
At night time when NVG’s are used, the advantages of the
“urban” TwinBeam laser can be fully exploited.
During night time operations the active IR laser marks the
target. At the same time the high performance infrared illumination
module provides full battlefield illumination. Indoors
and in tunnel like structures even the furthest corners are
reached. Outdoors and in low residual light conditions the
high power of the illuminator beam is intense enough to secure
the lighting up of the immediate battlefield. The visibility
of the aiming laser is guaranteed as the illumination module
is suitable for use with lasers in eye safe settings.
To illuminate targets at longer range the TwinBeam can be
fitted with a second laser in lieu of the illuminator module.
This second laser is then used as an illuminator.
Both system elements have their own power supply making
them fully redundant and independent in operation.

D533e11.11©Rheinmetall ©2008 I.L.E.E. AG, Urdorf/Switzerland We reserve all rights in connection with this document. Subject to alterations without prior notice.
Following aiming components are fitted in the MicroT1-Twin-
Beam hybrid system:
Passive red dot reflex sight with 12 dot brightness
settings – 8 NVD and 8 daylight
IR laser with a power setting as per laser 1, 2 or 3 below
Infrared high power battlefield illumination module
(option laser illuminator)
If required, other wavelengths and power settings are also
available
Technical Data
Optical system
Optical coating
Adjustment
Power supply
Battery
Light source
Laser 1
Laser 2
Laser 3
IR illumination
Power supply
Battery
Dimensions
System width
41mm ± 0.5mm
System height
60mm ± 0.5mm
Wavelength
840nm
840nm
840nm
830nm
Quantity
1
Quantity
2
Characteristics
Unless indicated otherwise, the data is accurate at ambient room temperature and normal operating conditions. Important notice: Beam output power will be set as
required by the user. The user is solely responsible for the observation of the applicable safety regulations.
I.L.E.E. AG · 8902 Urdorf · Switzerland · Phone +41 44 736 11 11 · Fax +41 44 736 11 12
office@ilee.ch · www.rheinmetall-defence.com
Aimpoint MicroT1 passive red dot sight
1X Antireflection and bandpass coated optics
Dot brightness adjustable to 12 settings
Dot X and Y adjustment without tools
IR invisible active laser (power setting as desired)
IR high performance illuminator for wide angle battle field
illumination
Choice of light source by simply turning a witch
Laser fully adjustable in X and Y
Compact system dimensions
Standard commercial battery powered
Adapters for most weapons available
Aimpoint MicroT1 red dot sight
Passive red dot collimator reflex sight
Antireflection and bandpass coatings, NVG compatible
±10 mrad in X and Y axis
Beam output
power