HIgH speed LAddeR pLAtfoRm - Roofac Safety

BAVARIA Rooftop
pRoduct sAfety
RAnge

mAuderer — competence in Aluminium
for over 30 years, the family-owned company mauderer Alutechnik from lindenberg
in Southern Germany has been manufacturing high quality aluminium products
for the most varied services and industries all round the world. „Bavaria Aluminium
Systems“ – that´s mauderers´ wide range of roof edge protection systems,
high-speed-ladder-platforms, access systems and scaffold solutions.
the “Bavaria Aluminium Systems” are designed to provide simple, safe and rapid
access up to all different kind of roofs. they are developed from the experiences
of the users who have to be able to work safely at heights. All products meet the
requirements of the applicable standards and legislation. As our roof edge protection
systems have been in constant use by contractors, local Authorities and utilities
for over 30 years, they are renowned for ease of use and rapid assembly.
All the manufacturing processes for the “Bavaria Aluminium Systems” are to the
highest standards in the industry. Quality „made in Germany“ is top priority as
far as we‘re concerned. tried, tested and trusted by customers which are active in
construction, industry or services at the highest level, they have come to rely on
the standards offered by our range.
safely working at height – that´s what the “Bavaria Aluminium systems” stand for!
please visit our Website at the following url: www.mauderer.de!
there you will fi nd further information about our company and our complete product range.
2

HIgH speed
LAddeR pLAtfoRm
As working platform
The new spring-loaded adjustment
on the telescopic leg, another HSE
suggestion, makes it quicker, easier
and safer to level the platform.
4
Assembling an access system has never been so fast, simple, light and safe!
The new access hatch, suggested
by the HSE, allows the user to step
onto a fully guardrailed
platform.
Lightweight and compact, the High Speed
Scaffold Platform presents no problems
with storage or transport.

BAvAriA hiGh Speed lAdder
plAtform
The Bavaria High Speed Ladder Platform has proved itself over
the years. The system consists of two Aluminium ladders (“v”
rated) and one working platform (5m) including a guardrail kit
and safety accessories like two foot extensions and two pairs of
ground pins. The High Speed Ladder Platform has been designed
to gain safe access to areas up to 8 metres high, releasing contractors
from dependence on independent erectors, scaffold towers
or other more time consuming platform systems. The High
Speed Ladder Platform complies to DIN EN 12811-1 (temporary
constructions for buildings).
AdvAntAGeS of our WorkinG plAtformS:
• Set-up in minutes
• Access to areas up to 8 metres (platform height)
• the “all-in-one” guardrail with integral toeboards, a feature
commended by the hSe, ensures operatives have maximum
protection once the system is assembled. the guardrail col-
lapses down for storage/transport.
• no small parts to get lost or stolen
• the trapezoid non-slip aluminium platform does not warp,
splinter or corrode and is easily kept clean
• comprehensive line of safety accessories
• “GS”-tested by the German Accident prevention Asscociation
• five-year safety and quality guarantee
Scope of delivery
position denomination Quantity
1 platform 1
2 folding guardrail 1
3 Guardrail post 2
4 Support arm 2
5 Wall fixation 2
6 pullay 2
7 rope with snap-hook 2
Scope of delivery…
code lenght/Width (m) Weight (kg)
731 2,50/0,60 29,0
732 3,50/0,60 38,0
733 5,00/0,60 49,0
According to European Norm HD 1000 “Scaffold Group 2”,
load capacity 1,5kN/m 2 .
... With hAtch
code lenght/Width (m) Weight (kg)
731 d* 2,50/0,60 29,0
732 d* 3,50/0,60 38,0
733 d* 5,00/0,60 49,0
* optionally with hatch on right side (e. g. 731DR)
or on left side (e.g. 731DL).
5

HIgH speed
LAddeR pLAtfoRm
As roof-edge-protection
(din en 13374 class c)
By attaching safety nets to the High Speed Scaffold Platform it can
be turned into a GS tested roof-edge-protection/platform up to a
roof inclination of 60°. This not only protects the operative from falls
over the roof-edge, but also offer a stable platform from which to operate
and acts as a debris netting. Especially for solar installations this
system is used all round Europe, minimizing set-up times and and
releasing contractors from dependence on independent erectors.
The HSLP enables access to areas up to 8 metres (platform height).
A load of up to 1,5 kn/m² (EN HD 1000, Scaffold Group 2) can be
put on the platform.
Therewith even roofs which are difficult to access can be equipped
in a short spell. Through the easy handling, the lightweight (the
complete system has a weight of 100 kg) and the fast installation,
efficient working with this platform is assured. The system is
installed in ten minutes – this is enormous time saving compared
to façade scaffolds.
6
on the safe side…
product range
Safety for use as roof-edge-protection
code denomination Weight (kg)
701/1 2,50 m Safety nets for roof-edge-protection 731 1,8
702/1 3,50 m Safety nets for roof-edge-protection 732 2,0
703/1 5,00 m Safety nets for roof-edge-protection 733 3,0
Mesh width: 4 cm x 4 cm

705-e-06
731
731 705-e-07
736
705-e-03
705-e-07
Built-up roof-chimney construction
product range:
code Qty denomination Weight (kg)
705 1 ridgeclaw kit 14
Consisting of:
705-e-07 2 ridgeclaw
705-e-06 2 Support arm
705-e-03 4 Wooden rest
HIgH speed
LAddeR pLAtfoRm
As roof scaffold
The High Speed Ladder Platform allows safe and easy access to
dormas for window installation, soffit and fascia work, or general
maintenance. In combination with Ridgeclaw kit 705 as a roof
platform, the HSLP enables safe and easy access to any roof work.
Together with Building Block System 736, the system can be upgraded
Auch to Fenster-Installationen a Chimney Access Platform. und -Reparaturen sind durch
roof-chimney die einfache scaffold: Kombination der Bavaria-Leitern-Blitzgerüste
• Platform
731, dachgerüstaufbau
loading: max. 225 kg
732 und 733 mit Zubehörsatz 705 möglich. Das
• Decksize: 250 x 60 cm
• Platform Bavaria-Leitern-Blitzgerüst height of second deck: 731 190 mit dem cm Aufbausatz 736
sowie dem Zubehörsatz erlaubt das sichere Arbeiten in
großer Höhe.
code Qty denomination Weight (kg)
736 1 Set for second deck 41
Consisting of:
2-070101 1 platform
2-070104 2 Guardrail post
2-070102 2 Side part
2-070105 1 toe board
2-070103 1 diagonal brace
2-070106 2 Stabilizer
The set for the second deck does not include the HSLP, wooden rests or
any ladders.
7

the BAvAriA extenSion lAdder incorporAteS
mAny poSitive feAtureS includinG:
• each ladder rung is individually replaceable
• Easy rung-by-rung adjustment (28 cm)
• Sections of push-up ladder can be used separately
• Rungs and side-bars made from extruded aluminium section
• Special guides and coatings ensure smooth operation of the
extension ladder
• Large range of ladder accessories
• Certified to EN 131
“ V-RAted”
BAVARIA
LAddeRs
The “v-rated” Bavaria ladders eliminate
the need of obtrusive cross-struts and
supports by putting all the strength in
“10cm side bar”. Each rung is individually
replaceable. Wheels at top are
standard. The use of the HSLP is only
allowed in combination with “v-rated”
Bavaria Ladders.
extenSion lAdder, 2 parts, type 920 extenSion lAdder, 3 parts, type 925
extension ladder, 2 parts, type 920
code length (m) Weight (kg)
920/2 x 12 v 3,61–6,13 16,0
920/2 x 14 v 4,17–7,53 20,0
920/2 x 16 v 4,73–8,65 22,0
920/2 x 18 v 5,29–9,49 26,0
v= “v-rated” side bars
8
1 2
extension ladder, 3 parts, type 925
code length (m) Weight (kg)
925/3 x 10 v 3,05–7,53 22,0
925/3 x 12 v 3,61–9,22 29,0
925/3 x 14 v 4,17–10,91 32,0
v= “v-rated” side bars

internal guard-rail (3 section)
code length (m)
731-G 2,5
732-G 3,5
733-G 5,0
Ridge claw and wooden rest (for roof inclinations between 30-60°)
code denomination
705/e-07 ridge claw
overhang/corner kit
toe board
code length (m)
2-070138 2,5
2-070141 3,5
2-070144 5,0
thanks to an additional bracket [1] and cross strut [2] the hSlp
can be shifted 80 cm to the side of the ladder.
pivotal pulley
code Qty
815A 1 piece
(2 pieces required)
lateral pulley
code Qty
815 pro piece
(2 pieces required)
Gutter grip
code Qty
802 1 piece
reversible ground pins
for soft ground
code Qty
805 1 piece
[1] Bracket
code Qty
2-070202 (links) 1 piece
2-070205 (rechts) 1 piece
rope with snap-hook
code length (m)
816 18 m
Adjustable ladder stand-off
code Qty
801 1 piece
foot extension for
uneven ground
code Qty
804 1 piece
AccessoRIes for HsLp
[2] cross Strut
code Qty
703-e-20 1 piece
Window Bar (2.5 metres long)
code Qty
1-450146 1 piece
13

mAudeReR
competence In
ALumInIum
mAuderer Alutechnik GmBh
Gossholzer Strasse 44
88161 lindenberg/Allgäu
fon +49 (0) 8381/9204- 0
fax +49 (0) 8381/9204- 44
email: info@mauderer.de
www.mauderer.de
09/2010