Fortdress-US Collection 2017

DRYING CABINET
MATERIAL CONSTRUCTION OF
FREEZER CLOTHING
TRST11030
DRYING CABINET
Quick drying and heating through hot air,
blown in intensively with 385 to 770 m3/
hour. Double thermal protection! Both the
doors and the hinges offer extreme
stability: Welded and brazed hinges made
of steel plate, beveled sheeting, corners
riveted four-fold, vertical reinforcement
bar on the doors, rubber knobs on the corners
for silent closing. At the factory, the
units can also be equipped with a further
blower to bring the total power up to 770
m3/hour. A first-grade chrome steel heating
coil with 2.15 KW offers very constant
heating output.
control panel weekly timer
POLAR SERIES
MATERIAL CONSTRUCTION
1. 220g/m 2 Polyamid
2. Polyester Wadding
(not yet defined)
3. 115g/m 2 Polyester
-5˚F/-56˚F
FTJ28HV + FTH28 USER‘S MANUAL
1 2 3 DURATION OF WEAR LIGHT ACTIVITY 170W/m 2 MODERATE ACTIVITY 170W/m 2
1 HOUR -56˚F -56˚F
8 HOUR -20˚F -56˚F
Type T11030
Modell: 8 combinations, 8 pairs of boots
and gloves
ARCTIC SERIES
MATERIAL CONSTRUCTION
Power: 2,15 kW
Dimension:
Width: 120 cm
Height: 198 cm
Depth: 71 cm
1. 240g/m 2 Polyamid Cotton
2. Polyester Wadding
(not yet defined)
3. approx. 80g/m 2 Polyester
-5˚F/-56˚F
1 2 3
FTJ20HV + FTH20HV USER‘S MANUAL
DURATION OF WEAR LIGHT ACTIVITY 170W/m 2 MODERATE ACTIVITY 170W/m 2
1 HOUR -56˚F -56˚F
8 HOUR -20˚F -56˚F
drying arms for gloves
composite STEEL
ALU
I/75 C I/75 C I/75 C
TOE CAPS FOOTWEAR exceeding
Impact and Compression
ASTM F2413-11 I/75 C/75 standards
PR fabric
Puncture resistant footwear meeting ASTM F2413-11
PR standards
EH
Boots and shoes with Electrical Hazard protection are
rated ASTM F2413-11 EH standards
COLD INSULATION FOOTWEAR
20 21
INSULATED
EMAIL SALES@FORTDRESS.COM WEB WWW.FORTDRESS.COM