ZIMM US_Screw Jack Systems_Brochure Xll1.1

CHECKLIST
Sheet 1 - Parameters
Company:
Address:
Contact:
Dept.:
Date:
Phone:
Fax:
Email:
1. max. lifting force in kN
- per gearbox ________ kN for the entire system ________ kN
- in tension ________ kN in compression ________ kN
- Load: static ________ kN dynamic ________ kN
Installation axis
c vertical c horizontal c pivoting
Type of load
c smooth c impact loads c vibration
2. max. lift/ travel ________ mm c effective working stroke ___________ mm
For short stroke applications
(eff. working stroke < gearbox height): c regular lubrication stroke practical c not practical
3. Lifting speed
c type N = 25 mm/s (1.5 m/min) c type L = 6.25 mm/s (0.375 m/min) c ___________________ mm/s
4. Duty factor, work cycle, description of cycle
__________ strokes per hour __________ strokes per day Hours per day c 8 c 16 c 24
For high duty factors or long strokes, please provide an exact detailed description on page 9, 4a
5. Type c S “Translating screw” c R “Rotating screw” c Z screw jack c GSZ screw jack
6. Motor c Three-phase AC motor c With brake c Manual release c ________________________
7. Operating conditions: c Dry c Humid c Dust c Chipping c ________________________
c Guided movement
c No guides (no dyn. lateral forces)
Ambient temperature: min. ___________ °C max. ___________ °C (when 40°C)
If possible please provide an exact description or sketch on page 9, 7a
8. Standard layouts no.: ______________ Size: MA1 __________ MA2 __________ MA3 __________ MA4 __________ MA5 __________
see standard layouts, checklist sheets 5 and 6 (for multi-jack systems)
9. Quantity Required: ______________________________________ Series: ___________________________________________
10. Schedule Quotation: ______________________________________ Delivery: ___________________________________________
8