maxon motor - special design motors_2016

Small
Ceramic carriage for precise
linear movements – precise
to a few µm. All-in-one unit
with brushless DC motor,
planetary gearhead and
inductive encoder.
Dimensions: 44 x 12 x
12 mm.
Compact
The increasing miniaturization
requires the highest
level of functionality in the
smallest of spaces. Parts
manufactured with MIM
technology can be massproduced
economically.
Gearhead Ø10 mm.
Precise
Only high-precision drive
solutions can provide the
micro-mechanical movements
of today’s machines.
This is a must for diverse
areas of application.
Motor Ø13 mm.
Worm gear
Multi-stage gearhead with
output shaft in worm design.
Lightweight, reliable and
cost‐optimized unit with
Ø15 mm motor.
Linear drive
A compact reversing gear
with threaded spindle
mounted free of axial play
transmits the movement to
the desired location.
Hollow shaft
Gearheads and motors
with hollow shafts allow two
speeds at the same location,
or can let through different
media, such as air, vacuum
or light.
Free of backlash
The backlash-free unit of
motor and worm gear withstands
the highest cyclic
demands. Increased service
life due to maintenance-free
drive solution. Available
width: 25 mm.
Multi-axis system
Several axes have to be
adjusted synchronously
within a very small space.
Modular controllers adapt to
the environment.
Motherboard, multi-axis system:
110 x 110 mm.
Efficient
Electrical hand tools in the
fields of medical and dental
technology require minimal
heat development and low
noise. These requirements put
high demands on the drive
solutions. Efficiency >90 %.
Torque density
Sophisticated combinations
of motors and mechanical
mounting equipment using
MIM technology ensure high
reliability and top torque
density for safety engineering
applications.
Robust
The motors are operated at
an ambient temperature of
–66 °C to +85 °C. The drive
system has been designed
to withstand high vibrations
and impacts.
Integrated controller
In addition to fitting into very
small spaces and meeting
high safety requirements,
this folding printed circuit
board also withstands high
temperatures.
For Ø22 mm motor.
4