InHand_FX_brochure_highres-rev-B

InHand Fury-X: Mobile, Internet of Things Platform
Optimized for Military, Medical and Industrial Use
The Fury-X single board computer (SBC), based
on the NXP i.MX 6SoloX processor, enables
space- and power-optimized circuitry for real time
control, cloud communication for Internet of Things
(IoT), and other high reliability applications. Its
many peripheral interfaces provide connection with
sensors, transducers, motors, and cameras for real
time applications with multiple network and Human-
Machine Interface (HMI) features.
The SoloX processor features two heterogeneous
ARM cores. The Cortex-M4 microcontroller enables
real time control with low power consumption while
running a real time operating system (RTOS). The
Cortex-A9 manages external network and graphics
communications via a higher level operating system,
such as Linux or Android. It may be powered down
when not used to conserve power and minimize heat.
The Fury-X IoT platform includes the processor,
DDR3, NAND flash, real time clock (RTC), watchdog
timer, and peripheral interfaces such as: SPI,
I2C, UART, CAN, USB 2.0 OTG, three USB 2.0
hosts, two 10/100/1000 Ethernets (one configurable
for Power over Ethernet), and wireless module. An
optional expansion board provides added peripheral
connectivity, including: LVDS or parallel LCD,
touch screen, camera, and additional serial/sensors.
S
t
a
c
k
i
n
g
C
o
n
n
e
c
t
o
r
USB x2
4:1 USB
USB
Hub
Hub
USB x3
Analog In x8
LVDS Display
I2C
GbE
PHY
CAN x2
SDHC
GPIO x8
Tamper
N
X
P
i
.
M
X
6
S
o
l
o
X
P
r
o
c
e
s
o
r
GbE
PHY
POE
Control
JTAG
Audio
5VDC Input
Cortex-A9
I/O MUX
Cortex-M4
Security
RTC
Ethernet Switch
RS232/
RS485
Camera
8-bit
Analog Video
In x4
LCD or Camera
24-bit
DRAM
eMMC NAND
NOR Flash
Battery
Charger & Gas
Gauge
Coin Cell
WiFi, ZigBee,
& Bluetooth
GPS
µUSB
mPCIe Slot
SIM Card
3.25”
63.5mm
Interprocessor communication is provided via BSP APIs that
utilize SoloX hardware semaphores, interrupts, and memory
buffers. SoloX peripheral mapping capability allows each
Fury-X peripheral to be controlled by the Cortex-M4 or the
Cortex-A9 in separate security domains.
4.5”
114.3 mm
The Fury-X can be used as-is as a standalone SBC. For customers
with specific product requirements, InHand’s engineering
services can create custom expansion boards for the
Fury-X or modify the Fury-X to meet product specifications.
InHand Electronics, Inc. • 30 West Gude Drive • Suite 550 • Rockville, MD 20850 • v: 240.558.2014 • f: 240.558.2019 • www.inhand.com

InHand Fury-X Specifications
CPU
Multi-Media
Accelerator
Security
RAM
On-board Storage
Serial
USB
SDHC
CANBus
Digital Audio
Keypad
GPIO
Ethernet
Camera/Multi-Media
Display Support
Battery Support
DC Power Input
RTC
Watchdog
Operating System
Off-Board Peripherals
Dimensions
Wireless Networking
NXP i.MX 6SoloX, featuring a single core ARM Cortex-A9 (800 MHz) and a single core
ARM Cortex-M4 (166 MHz) within a single package
GC400T Graphics Engine with 2D and 3D acceleration; Direct FB and GAL APIs;
Open GL 2.0, Open VG 1.1
ARM TrustZone, Cryptographic Acceleration and Assurance Module (CAAM), True random
number generator (within CPU)
512 MB, 1 or 2 GB DDR3
4, 8, 16 or 32 GB eMMC flash
2 UARTs, 3 I2C, SPI
1 USB 2.0 OTG; 3 USB 2.0 Hosts
2 SDHC v.3.0
1 CANBus 2.0
1 I2S digital audio interface
Matrix keypad 2x2
8 Digital GPIO lines plus power control GPIOs, LED drive lines, sensor interrupts
(accelerometer, barometer, light sensor)
Dual 10/100/1000 Ethernet MAC + PHY; switch inside CPU; Power over Ethernet capable
1 8-bit BT.656 parallel interface; 4 analog composite video inputs
1 LVDS output, up to WUXGA (1920 x 1200)
Lithium ion battery input; charger and fuel gauge on-board
3 to 6.5V DC input
Battery backed real-time clock
Hardware watchdog on board
Cortex-A9: Linux, Android Lollipop 5.0 or later; Cortex-M4: FreeRTOS or MQX
Accelerometer, ambient light sensor, digital compass (magnetometer), barometer, haptic motor
4.5” x 3.25”
Wi-Fi 802.11 b/g/n with enterprise-level security, Bluetooth, and ZigBee
Modified COTS Design Services
InHand is available to customize any of its Commerical Off-the-Shelf (COTS) SBC and tablet products using a process called Modified COTS. Starting from
validated schematic, circuit board layout, BSP, and mechanical files, the product is modified to implement design-specific requirements and remove unneeded
features. Modified COTS gets you to market faster, with lower cost and less risk, and optimized circuitry. Contact InHand for an evaluation of your requirements
and associated quote. For more information: http://www.inhand.com/work-category/custom-electronic-design/
Contact Information
info@inhand.com • v: 240.558.2014, ext. 216 • www.inhand.com/contact
InHand Electronics, Inc. is an original design manufacturer of single board computers and rugged handhelds for original equipment manufacturers. InHand offers commercial
off-the-shelf (COTS) computing platforms and Modified COTS design services for custom electronic and Internet of Things (IoT) product solutions. InHand’s products are used in a
variety of markets including: military, healthcare, industrial, entertainment, and instrumentation. Products feature industry-leading technologies such as: NXP, Texas Instruments, Intel
and Marvell processors; Android, Linux, Ubuntu, and Microsoft operating systems; and communications technologies such as: cellular, Wi-Fi, personal area network, and Ethernet.
InHand’s engineering design services include: system, hardware, software, and packaging; support services include: product manufacturing, program management, manufacturing test
development, and supply chain. InHand is an ITAR registered company. InHand products are designed and assembled in the USA. The company’s headquarters are located along the
I-270 Technology Corridor in Rockville, Maryland. For more information, visit www.inhand.com.
Designed & Assembled
in the USA
InHand Electronics, Inc. • 30 West Gude Drive • Suite 550 • Rockville, MD 20850 • v: 240.558.2014 • f: 240.558.2019 • www.inhand.com