Surface Mount Antennas 806-1990 MHz & GPS - Greenwave ...

PN7 Series with
Integral N
PN7 Series Fork
lift mount kit
PN7 Series with
Pigtail
Mobile Mark's RFID Panel Antennas are perfect for RFID
systems, as well as other applications in the ISM band.
They are designed to operate in close proximity to metal,
which normally has a tendency to detune antennas.
The PN7 Series antennas are available in circularly polarized
(US models are RHCP; EU models are LHCP). With
7 dBic gain, these antennas provide significant performance
improvements over a micro-sized patch. They
can be mounted in any setting including directly against
metal. This is useful for a variety of applications, but particularly
for mounting on forklifts.
Model series PN7 antennas are small 6.75" H x 6.75" W
x 2"D (172 mm x172mm x 50 mm) and attractive. The
antennas are provided with 4 corner holes for mounting
flush to a surface. An optional kit readily accommodates
mounting to the load back rest of a forklift truck for palletized
scanning.
The antenna is available in 2 styles, a direct N connector
version, as well as a coaxial "Pigtail" version. The coax
Specifications
Frequency:
PN7-915 series 902 - 928 MHz (US)
PN7-868 series 865 - 870 MHz (EU)
Gain: 7 dBic maximum
Axial Ratio: 3 db Max
VSWR: 1.5:1 max over range
Impedance: 50 Ohm nominal
Maximum Power: 20 Watts
Beamwidth: 70 o elevation, 70 o azimuth
Front-to-Back ratio: 15 dB or better
Operating Temp: -40 o C to +85 o C
Mounting: 4 Hole Corner Mount,
Weight: 1.1 lbs (0.5 kg)
Panel Antennas, 7 dBic
RFID & ISM, Forklift
■ Durable low profile design
■ RF tuned for mounting directly against
metal, perfect for forklift applications
■ 7 dBic panel model for long range systems
■ Optional mounting kit adapts antenna for
metal settings such as forklifts, shelving,
gates or racks
pigtail version is supplied with an SMA, other connectors
can be specified at time of order to match your application.
Jumper cables can also be provided for either version
to accommodate a variety of installations.
The PN7 Series has a DC shorted front end and is compatible
with antenna sensing circuits found in the current
generation of RFID readers. If your reader has a feature
that requires a 10K ohm resistor, the PN7 antenna can
be special ordered with this feature.
Model Number
Models Description
PN7-915-BLK US 902-928 MHz
PN7-915PT-1C-BLK-12 US 902-928 MHz
PN7-868-BLK EU 865 - 870 MHz
PN7-868PT-1C-BLK-12 EU 865 - 870 MHz
FL-MK Fork lift mounting kit
For special configurations, please contact your sales
representative.
Radome Size: 6.75" Hx 6.75" Wx 2" D
(172 mm x172mm x 50 mm)
Antenna Radome: Black ABS
Termination:
"PT" Models 1 ft (30 cm) RG-58/SMA male
"N" Models Integral N female
Optional Mounting: Model FL-MK mounting kit,
allows PN7 mounting on
forklift load backrest
Shock & Vibration: EN 61373, IEEE 1478, MIL-810G
TIA 329.2-C
Water Ingress: IPx7
US Office & Headquarters: 3900-B River Road, Schiller Park, IL 60176 Tel: 800-648-2800 or 847-671-6690 Fax: 847-671-6715
UK Office: 106 Anglesey Business Park, Hednesford, Staffs. WS12 1NR UK Tel: (+44) 1543-878343 Fax: (+44) 1543-871714
96
Visit our web page at www.mobilemark.com. Specifications subject to change without notice (1/2012).