2016-2017 Aircraft Spruce Catalog

PEEL PLY – PRIMERS – PAINTS
PEEL PLY
A layer of 2.7 oz. Dacron fabric strips or tape
laminated into a layup as if it were an extra ply
of glass. The peel coat wets out with epoxy like
glass cloth and cures along with the rest of the
layup. However, the Dacron does not adhere
structurally to the glass and when peeled away it
leaves a surface ready for glass-to-glass bonding without sanding.
Requirements for Small Aircraft:
• 3 Rolls of 1” x 50 Yds. Tape • 2 Rolls of 2” x 50 Yds. Tape • 1 Roll of
3” x 50 Yds. Tape • 1 Roll of 4” x 50 Yds. Tape
Width Smooth Edge Pinked
50 Yd P/N Price/ P/N Price/
Roll 09- Roll 09- Roll
1” 15000 $7.00 15450 $6.75
2” 15100 $14.25 15500 $14.00
3” 15200 $22.25 15600 $20.75
4” 15300 $29.00 15700 $28.75
6” 15400 $47.00 15800 $41.25
Discount Schedule for Dacron Tapes:
Less 10% for 12 Rolls
(assorted) • Less 15% for 25 Rolls (assorted). Request quote on
larger quantities.
FULL WIDTH PEEL PLY
Poly/Dacron blend is excellent as peel ply for
composite lay-ups.
Full Width Peel Ply 2.7OZ, 64-66” #604
(Sold by the Yard) ..... P/N 09-00300 ..........$5.35
Full Width Peel Ply 1.8 oz. X 64” #611
(Sold by the Yard) ..... P/N 09-00100 ..........$4.35
Full Width Peel Ply 2.97 oz. X 62” #605
(Sold By the Yard) ......................................... P/N 09-00500 ..........$3.95
MOLD RELEASE AGENTS
POL-EASE ® 2300 MOLD RELEASE
Provides superior release with minimum buildup on mold
surfaces for casting urethane elastomers, epoxy, polyester,
and rubber compounds. Molded parts are easily cleaned
for finishing operations. It is effective on aluminum, steel,
epoxy, polyester, and elastomeric molds; it does not distort
intricate patterns. P/N 01-31749 .......... $28.85
LPS MRX SILICONE MOLD RELEASE
Excellent for releasing molded parts in high temperature and
extreme pressure environments. MRX Silicone Spray Mold
Release provides maximum releases and superior value for
the end-user. This non-staining, non-corrosive mold release is
heat stable up to 500°F. It is a nonflammable product and contains
no class I or II ozone depleting chemicals. Like all LPS
MR-series mold releases, MRX Silicone Spray Mold Release
doesn’t use Methylene Chloride.
16 oz. aerosol can .....................P/N 09-00271 ............ $11.85
PVA RELEASE FILM
PVA (Polyvinyl Alcohol) should be used with #1016 Wax to aid
in the release of parts form a mold. It should be applied in 3
thin mist coats over nonpourous, waxed mold surfaces.After
the final wax coat has dried, begin by spraying a light tack coat
of PVA. Typically, within 5 mins. the final heavier coats can be
added. The PVA dries to form a smooth, glassy film. After part
release, the residual film can be removed with water. We recommend
using an inexpensive automotive siphon spray gun
and 70-90 psi for application, although airbrushes will work on
hobby size projects. PVA can also be sprayed over any polyester repair
to provide an airless tack-free cure. For use with epoxies.
P/N 01-14813A .........................................$22.85/qt
ZOLATONE COCKPIT PAINT
Used to paint cockpit interiors, excellent on fi berglass.
Gives a coarse, durable, professional finish.
1 gallon required for Long-EZ cockpit. Primer not
required when used on fiberglass. Color chart available
on request. Order Color Chart P/N 01-15815.
Color Use Primer Part No. Price
White/White White 20-02 $159.75
Apollo Gray - 20-11 $159.75
Hamlet Black - 20-42 $149.75
Camille White White 20-54 $158.75
CM
WP
ME
HA
AP
LG
EP
CS
IN
MAXIMUM MOLD
RELEASE WAX
Meguiar’s® Mold Release Wax is a blend
of imported waxes specially formulated to
provide a maximum number of releases
per application.
P/N 01-09415 .....................$13.50
MOLD RELEASE WAX
High-temperature paste wax. 14 oz.
P/N 01-00177 ..........$16.90
FIBERGLASS MOLD RELEASE
Plastilease 512B, a film-forming, water soluble parting agent,
assures clean re lease of fi ber glass parts from molds. For
application by brush or spray.
P/N 01-30600 ..................... $30.75/Qt.
Lilith Charcoal Black 20-59 $159.95
Gray Stone Gray 20-64 $159.75
Onyx Black - 20-71 $158.95
Silver Gray Gray 20-72 $158.95
Bright Blue - 20-77 $165.95
Desert Camo Black 20-80 $169.75
Emerald Green - 20-85 $129.85
HI GLOSS CLEAR POLYESTER TOP COAT
Features: * Super Clear - Glass like appearance
* Scratch Resistant * Buffs to a Super
Hi-Gloss Finish * Refinishes to Original Hi-Gloss
* Practically a Walk-A-Way Gloss Finish
Product Applications: * Exotic wood coating
* Gel coat additive for air cure application
* Musical instrument wood coating * Top coat
over clear primers * Top coat over pigmented
colors for clear depth * Automotive interior composite
parts clear coating * Archetectural wood
crafts
Quart .....................P/N 09-02168 .......... $36.50
Gallon ..........................................................P/N 09-02169 ........ $104.50
Requires Catalyst P/N 01-01119.
EL
AV
TO
PS
BV
Prices Subject to Change Without Notice
WWW.AIRCRAFTSPRUCE.COM
35