TLJ Electronic Locking Solutions Brochure

Access control
RFID wall reader
The TLJ Access control wall reader is used on public doors which
may be subject to medium or high traffic volume, e.g. a front entrance.
Typically the reader is wall mounted within close proximty of the door
and controls an electro-magnetic lock or such other suitable device.
The reader communicates with a TLJ controller which
in turn instructs the electro-magnetic lock to lock or unlock
the door. The controller also provides the reader with a
12 volt power supply.
262mm
127mm
The TLJ Access control wall reader and TLJ controller are
hard-wired units, requiring electrical installation and a 240
volt mains supply. A wiring diagram is available to aid with
installation.
372mm
74.5mm
It’s not only conventional doors which the TLJ reader can be used to control:
- Automated sliding doors
- Turnstiles
- Car park barriers
- Elevators/Lifts
- Door operators for DDA (Disabled Door Access)
- Automatic car park gates
PULL
There are two variants of the TLJ Access control wall
reader, offline and online. Both work in conjunction
with the TLJ platform, using the same token (card,
fob, wristband etc.) The online version, however, offers
the advantage of communicating directly with the TLJ
management software (ALMS) allowing remote control,
cancellation, locking/unlocking and issuing access tokens.
TLJ Security Systems, 68/78 Leads Road, Hull, East Yorkshire, HU7 0BY, UK
Registered Company UK: 06865825 Head Office Contact: 01482 830334
W: www.tljlimited.com E: sales@tljlimited.com © TLJ Attendance Systems Limited 2017