How to fix Brother Printer Error 48 | Dial 448000465291 for Help

How to fix Brother Printer Error 48?
Toll Free : +44-800-046-5291

Steps to troubleshoot
Brother Printer Error 48
To fix Brother Printer Error 48 one need to either
follow the blog steps or connect to professional tech
experts. The machine error or init unable 48 means
that print head cable or circuit board is defective.
Other message such as Unable to Clean, Unable to
Print, Unable to scan one can follow the steps and
get rid of the word arriving unable. Call to Brother
Printer Support for assistance or proper
understanding of the machine error code 48.
Toll Free : +44-800-046-5291

Step 1: Checking for Debris and Paper Scraps
Disconnect the Printer machine from the power Outlet.
• Lift the up the scanner cover using the plastic tabs or finger holds, located on the left
and right side of the machine until it locks securely into the open position.
• Look up inside the machine for jammed paper or foreign objects and remove. The
paper may be jammed under the print head. If the print head is in the middle, use your
fingers to slide the print head to right or left side and check for paper scraps underneath
the print head.
– In case the print head is on the left side, follow steps of “If the print head is on the left
side”.
– If the print head is on the right side, follow steps of “If the print head is on the right
side”.
• If the print head is on the left side:
o Move the print head to the middle using your fingers.
o Close the scanner cover and connect the machine back into the power outlet.
o The encoder strip need to be cleaned as error message is still continue.
• If the print head is on the right side:
o Connect the power cord back into the power outlet. The LCD shows “Cover is Open”.
o Disconnect the machine from the power outlet.
Toll Free : +44-800-046-5291

Step 2: Clean the encoder strip
Toll Free : : +44-800-046-5291
Disconnect the Brother Printer machine from the power outlet.
• Until the machine is not locked securely into the open position
lift the scanner cover using the plastic tabs or finger holds,
located on the left and right side.
• Locate the Encoder Strip. The encoder strip is a clear plastic
strip in front of the white vinyl band.
• Clean both sides of the encoder strip with a dry lint free cloth.
• Clean encoder strip from right to left. Make sure to stop just
before the left corner.
• Repeat steps 5 and 6 2 or 3 times to clean thoroughly.
• After cleaning the encoder strip, close the scanner cover.
• Connect the machine back into the power outlet.

For assistance call to Brother Printer
Customer support Number
You can contact Brother Printer Customer Support Phone
Number UK @ +44 800 046 5291(toll-free) for immediate and
instant support. You will be assisted in resolving each and every
problem which is failing to accept the print command.

Get In Touch With US
https://www.facebook.com/448000465291-Brother-Printer-
Support-Number-UK-1492468294139315/
https://plus.google.com/u/0/111737946232708100561
https://twitter.com/BrotherPrintSup
https://www.youtube.com/channel/UCyFRDtO_swD5L_Xcj2
oYb0Q

Contact Us
• Company Name: Brother Printer Support Number
• Address: 17 Wellington Street, Ripley, Derbyshire
• Email:
support@brotherprintersupportnumber.co.uk
• Website:
www.brotherprintersupportnumber.co.uk/
• Toll-Free Number : +44-800-046-5291
• Working Hours : 24*7

Contact Us