RoHS DIRECTIVE COMPLIANCE - Richco

RoHS DIRECTIVE COMPLIANCE
The following Product Series are produced by Richco, Inc.:
The following parts are included in its entirety in the product series:
CFCC Clamp, Flat Cable, Adhesive Mount
Richco, Inc.
8145 River Drive
Morton Grove, Illinois 60053
Tel: 773 539 4060; Fax: 773 539 6770
www.richco-inc.com
CFCC-3-05 CFCC-4-05 CFCC-8-04 CFCC-8-05
CFCC-3-05A-RT CFCC-4-05A-RT CFCC-8-04A-RT CFCC-8-05A-RT
CFCC-3-05A1-RT CFCC-4-05A1-RT CFCC-8-04A1-RT CFCC-8-05A1-RT
The above Product Series are respectively produced with the following substances:
RMS-04: Polyvinyl chloride Rigid PolyOne Corp. Geon 8700
RMS-05: Polyphenylene Ether + PS Sabic Noryl® EN 265
RMS-015: Acrylic Adhesive Polyurethane Foam Tape
Saint-Gobain Performance Plastics Normount® V9000
RMS-102: Rubber Adhesive Polyethylene Foam Tape Stik II® 2232
Except as provided below, to the best of Richco's knowledge and belief, each of the Product Series
listed above complies with the compositional requirements of the European Union Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Directive
2011/65/EU ("RoHS Directive"). The substances that are banned by the RoHS Directive are not
intentionally added to any of the products within each Product Series.
This document is valid without signature and replaces all former statements made by Richco, Inc.
concerning the RoHS Directive.
DISCLAIMER
THIS LETTER AND OTHER INFORMATION PROVIDED IN CONNECTION WITH
COMPLIANCE WITH THE RoHS DIRECTIVE IS PROVIDED "AS IS" "AS AVAILABLE"
AND "WITH ALL FAULTS." RICHCO DISCLAIMS ALL EXPRESS OR IMPLIED
CONDITIONS, REPRESENTATIONS AND WARRANTIES OF ANY KIND, INCLUDING
ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT.
SPECIALISTS IN MANUFACTURING QUALITY PLASTIC PRODUCTS

RoHS DIRECTIVE COMPLIANCE
The following Product Series are produced by Richco, Inc.:
The following parts are included in its entirety in the product series:
CFCC Clamp, Flat Cable, Adhesive Mount
Incorporated In England Registered Office: As above Registered No. 2924696
Richco International Company Ltd.
Richco House, Springhead Enterprise Park,
Springhead Road, Gravesend, Kent DA11 8HE
Tel: 01474 327527
Fax: 01474 327455
Web www.richco-int.com
CFCC-3-05 CFCC-3-05A4-RT CFCC-4-04 CFCC-4-04A4-RT
CFCC-4-05 CFCC-4-05A-RT CFCC-8-04 CFCC-8-04A4-RT
CFCC-8-05 CFCC-8-05A4-RT
The above Product Series are respectively produced with the following substances:
RMS-04: Polyvinyl chloride Rigid PolyOne Corp. Geon 8700
RMS-05: Polyphenylene Ether + PS Sabic Noryl® EN 265
RMS-324: Polyethylene Foam Acrylic Adhesive Lohmann Duplocoll® VP 6134
Also known as Duplocoll® 5110
RMS-324: Polyethylene Foam Rubber Adhesive Lohmann Duplocoll® 5003 HDPE
Except as provided below, to the best of Richco's knowledge and belief, each of the Product Series
listed above complies with the compositional requirements of the European Union Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Directive
2011/65/EU ("RoHS Directive"). The substances that are banned by the RoHS Directive are not
intentionally added to any of the products within each Product Series.
This document is valid without signature and replaces all former statements made by Richco, Inc.
concerning the RoHS Directive.
DISCLAIMER
THIS LETTER AND OTHER INFORMATION PROVIDED IN CONNECTION WITH
COMPLIANCE WITH THE RoHS DIRECTIVE IS PROVIDED "AS IS" "AS AVAILABLE"
AND "WITH ALL FAULTS." RICHCO DISCLAIMS ALL EXPRESS OR IMPLIED
CONDITIONS, REPRESENTATIONS AND WARRANTIES OF ANY KIND, INCLUDING
ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT.