mt25-ProgramBook

Mon-Af-Po1.10-08 [154]
Quench Behaviour of a Metallic Cladding REBCO Coil
Containing Copper Strips for Outer Diameter Adjustment
Kwangmin Kim, Kabindra Bhattarai, Kwanglok Kim, et al.
National High Magnetic Field Laboratory
Mon-Af-Po1.10-09 [155]
Quench analysis and protection design of SECRAL II superconducting
magnet
Shijun Zheng, Wei Wu, Tongjun Yang, Beimin Wu, et al.
Institute of Modern Physics, CAS, China
Mon-Af-Po1.10-10 [156]
Influence of local critical current degradation on quench
characteristics of a ReBCO coil
Momoe Ide, Daisuke Miyagi, Makoto Tsuda, et al.
Tohoku University, Japan
Mon-Af-Po1.10-11 [157]
Experimental Study of Quench Performance for Superconducting
Coil with YBCO Coated Conductors
Panpan Chen and Jiahui Zhu
China Electric Power Research Institute, China
Mon-Af-Po1.10-12 [158]
Unbalanced Torque in High Magnetic Field No-Insulation
REBCO Pancake Magnet after Quench
So Noguchi, Ryosuke Miyao and Seungyong Hahn
Hokkaido University, Nat. High Magnetic Field Lab., Japan
Mon-Af-Po1.10-13 [159]
A Numerical Method for Simulating the Quench Behavior
of Superconductors
Wei Pi, Yinshun Wang, Jin Dong and Xiaochuan Shi
North China Electric Power University, China
Mon-Af-Po1.10-14 [160]
A Study on Post-Quench Behaviors of No-insulation HTS
Magnet under Over-Current Conditions
Yoon Hyuck Choi, Haigun Lee, Jung-bin Song, et al.
Dep. of Materials Science and Engineering, Korea University
Mon-Af-Po1.10-15 [161]
Investigation on Thermal and Electrical Characteristics
of MgB2 Magnet Using Partial-Insulation Winding Technique
Young-gyun Kim, Haigun Lee, Jiman Kim, et al.
Dep. of Mat. Sci. and Eng., Korea University, Seoul, Korea
Mon
69