You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TREND FLAT BIT<br />
TREND TWO FLUTE CUTTER<br />
• An economical bit for cutting quick holes in timber<br />
• All cutters have a bottom cut feature<br />
• With centre point, back tapered cutting edge and ground chip breakers • D: 35 mm<br />
• Shank diameter: 6.35mm(1/4in)<br />
• Diameter: 19mm<br />
Code Description<br />
9502200 Trend Flat Bit 19mm<br />
TREND DOVETAIL CUTTER<br />
• Suitable for a wide range of applications such as engraving, grooving,<br />
rebating and shallow mortising<br />
• Use on softwoods, hardwoods, MDF, plywood and chipboard<br />
• OL: 60 mm<br />
• Shank diameter: 12.7cm(1/2in)<br />
• Recommended speed: 1000-20000 RPM<br />
• Available sizes: 6mm, 6.3mm, 8mm, 10mm, 12mm, 12.7mm 15mm<br />
Code<br />
9501000<br />
Description<br />
Trend Two Flute Cutter 6mm<br />
9501005 Trend Two Flute Cutter 6.3mm<br />
9501010<br />
9501015<br />
9501020<br />
9501025<br />
9501030<br />
9501060<br />
9501065<br />
9501075<br />
Trend Two Flute Cutter 8mm<br />
Trend Two Flute Cutter 10mm<br />
Trend Two Flute Cutter 12mm<br />
Trend Two Flute Cutter 12.7mm<br />
Trend Two Flute Cutter 15mm<br />
Trend Two Flute Cutter 12.7mm<br />
Trend Two Flute Cutter 12.7mm<br />
Trend Two Flute Cutter 12.7mm<br />
TREND ROUND OVER OVOLO CUTTER<br />
• These cutters are for Trend craft dovetail jigs<br />
• D: 12.7 mm<br />
• C: 20 mm<br />
• OL: 60 mm<br />
• A: 104 degrees<br />
• Shank diameter: 6.35mm(1/4in)<br />
Code<br />
9501035<br />
Description<br />
Trend Dovetail Angle 104° Degree<br />
TREND POCKET HOLE PLUG CUTTER<br />
• Self-guiding cutters for rounding over edges<br />
• They are supplied with two bearings<br />
• Use the larger bearing when creating round over cuts<br />
• If the cutter is lowered, a top quirk can be produced<br />
• Bullnose mouldings can also be produced by taking a second pass from<br />
the opposite side of the workpiece<br />
• Does not require a side fence<br />
• Shank diameter: 6.35mm(1/4in)<br />
Code<br />
9501045<br />
Description<br />
Trend Rounding Over 6.3mm<br />
• Tool steel plug/pellet cutter<br />
• Use in a pillar drill to allow plugs to be made to cover the pocket hole<br />
pockets<br />
• Allows plugs up to 52mm long to be created in end grain<br />
• Shank diameter: 6.35mm(1/4in)<br />
Code<br />
9501660<br />
248<br />
Description<br />
Trend Pocket Hole Plug Cutter
Change language