Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TREND POCKET HOLE JIG<br />
TREND ANGLEFIX MITRE GUIDE<br />
• For fast and accurate joining of timber and plywood giving<br />
strong instant joints<br />
• Solid hardened bushes with variable pitch of 29mm to 63mm<br />
• Use on timber, MDF, plywood and blockboard<br />
• Allows a variety of joints to be created individually<br />
• Uses square drive self tapping screws<br />
• Workpiece can be handled immediately after gluing and screwing<br />
creating time saving benefits<br />
• No clamps required<br />
Code<br />
9501600<br />
Description<br />
Trend Pocket Hole Jig Starter Set<br />
• Use for mitre cutting of frames, skirting, architrave and beading as well as<br />
basic marking out<br />
• Halves angles to achieve correct cutting angle before cutting mitres<br />
• Use for mitre cutting of frame, skirting (not tall skirting), architraves and<br />
beading as well as basic marking out<br />
• Sets internal and external angles<br />
Code Description<br />
9501420 Trend Anglefix Mitre Guide<br />
TREND BISCUIT JOINTER SET<br />
TREND POCKET HOLE DRILL BIT<br />
• Pocket hole jig stepped drill bit<br />
• Extra long tip to aid starting off<br />
• Shank diameter: 6.35mm(1/4in)<br />
Code Description<br />
9501650 Trend Pocket Hole Drill Bit<br />
• This two wing self-guiding tungsten carbide tipped slotting cutter is ideal<br />
for biscuit jointing<br />
• The set is supplied with three ball bearing guides to suit the three sizes of<br />
biscuits available<br />
• A slightly longer cut than the length of the biscuit is required for ease of<br />
alignment during assembly<br />
• Shank diameter: 6.35mm(1/4in)<br />
• Available sizes: 1/4mm, 1/2mm<br />
Code<br />
9502000<br />
9502010<br />
Description<br />
Trend Biscuit Joint Cutter 1/4<br />
Trend Biscuit Joint Cutter 1/2<br />
250