And Guideways

Shaft and Support
Rail Units
TSSW SERIES
For details on part numbers, descriptive suffixes and various technical references, please refer to front of this section.
For engineering or technical information contact your local sales representative or call Distributor Sales (800)523-6572 or Linear Sales (800)462-3399.
SHAFT
DIAMETER
D LW
� �
� �
� �
�� �
� �
DIMENSION TABLE · Dimensions in mm
�
��� �� ���
PART NUMBER MASS DIMENSIONS MOUNTING DIMENSIONS
� �
� � ��
� �
� �
� ��
� �
� �
a 1 h4 1 ) L 2 ) a2 1 ) a3 a 4 a5 3 ) C4 C 5/C 6 4 ) C5/C 6 4 ) h1 h 6 h 7 K 1 3 ) K5 3 )
h6 kg/m �0.01 �3 �0.012 min. max. �0.15
20 TSSW 20 4.12 15 52 6,000 7.5 8.1 4 8.5 50 20 42 36.5 30 15 6.6 11
25 TSSW 25 5.98 20 62 6,000 10 10.3 5.5 11 60 20 50 38.5 36 18 9 15
30 TSSW 30 8.68 25 72 6,000 12.5 11 7 13.5 75 20 64 43 42 21 11 18
40 TSSW 40 14.3 30 88 6,000 15 15 8.5 16 100 20 88 53 50 25 13.5 20
50 TSSW 50 21.47 35 105 6,000 17.5 19 9 18.5 100 20 86 64.5 60 30 15.5 24
1 ) With reference to the nominal shaft diameter, measured while clamped.
2 ) Maximum length of single-piece units, longer units are supplied as several pieces.
Depending on the length of the shaft and support rail unit, the support rail is composed of several pieces.
3 ) For fixing screws to DIN 912-8.8 and spring washers to DIN 7 980.
4 ) Dimensions C5 and C6 are dependent on the length of the shaft and support rail unit
534
� �
� �
� �
� �