User guide
sayberx product information
sayberx product information
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
USER GUIDE<br />
WE KNOW USER MANUALS ARE BORING HOWEVER FOR<br />
YOU TO GET THE BEST EXPECIENCE FROM SAYBERX<br />
TAKE A MINUTE AND READ THIS BEFORE USE<br />
Please read this manual before use. Keep this user manual for future<br />
reference. Should this device be passed on to a third party, this user<br />
manual must be included.
THE CONTROLS<br />
1<br />
2<br />
3<br />
EASY AS 1,2,3<br />
1) INCREASE THE SPEED<br />
2) POWER ON / EMERGENCY STOP<br />
3) DECREASE THE SPEED
REMOVALBLE PARTS (1)<br />
THE TOP CAP
REMOVALBLE PARTS (2)<br />
THE END CAP
REMOVABLE PARTS (3)<br />
SAYBERSKIN AND CUP
SOLO USE (1)<br />
1) CONNECT THE POWER SUPPLY AND PLUG INTO THE MAINS<br />
2) PRESS POWER ON BUTTON, BLUE LIGHT = READY TO GO<br />
3) LUBRICATE INNER CHAMBER, FOR BEST RESULTS USE GUN OIL<br />
PRODUCTS, (OTHER LUBES WORKS TOO)
SOLO USE (2)<br />
1) WHEN READY (YOU KNOW WHAT WE MEAN)<br />
ENTER THE SAYBERX AND GET INTO A GOOD POSITION<br />
2) GET THE PARTY STARTED BY PRESSING THE<br />
INCREASE SPEED BUTTON AND ENJOY<br />
3) THE POWER ON BUTTON IS ALSO THE STOP BUTTON, BEST PRACTISE<br />
IS TO STOP THE SAYBERX BEFORE REMOVING, ITS ALSO OK TO HAVE FUN<br />
IN THERE WE WILL SHOW YOU HOW TO CLEAN IT UP NEXT
REMOVAL FOR CLEANING (1)<br />
1) PRESS THE STOP BUTTON FOR 3 SECONDS<br />
UNIT WILL POWER OFF OR UNPLUG<br />
2) TURN THE UNIT UPSIDE DOWN AND<br />
REMOVE THE END CAP
REMOVAL FOR CLEANING (2)<br />
3) GIVE THE SAYBERSKIN A GENTLE PULL AND<br />
WIGGLE AT THE SAME TIME IT WILL POP RIGHT OUT
SAYBERSKIN CLEANING<br />
AND MAINTENANCE<br />
1) WITH THE SAYBERSKIN OUT OF THE UNIT USE WARM WATER<br />
TO CLEAN, TO EXTEND THE LIFE OF THE SAYBERSKIN WE<br />
RECOMMEND USING ANTI BACTERIAL CLEANER<br />
2) NOW THE SAYBERSKIN IS ALL NICE AND CLEAN DRY IT OFF,<br />
LET THE WATER DRAIN OUT THE ENTRANCE. TO MAINTAIN<br />
THE FRESH LOOK CORN STARCH DOES A GREAT JOB APPLY<br />
SOME TO THE EXTERIOR<br />
3) IF YOU ARE EAGER TO GO AGAIN YOU CAN ALWAYS<br />
CAREFULLY TURN THE SAYBERSKIN INSIDE OUT TO DRY INSIDE
RE FITTING THE SAYBER SKIN (1)<br />
TO RE-FIT THE SAYBERSKIN YOU MUST<br />
FIRST REMOVE THE SAYBERSKIN CUP<br />
1) REMOVE THE TOP CAP PINCH THE<br />
AREA SHOWN AND LIFT THE CAP OFF<br />
2) THE SAYBERSKIN CUP IS HELD IN WITH TWO CLIPS AT<br />
THE TOP PRESS THEM IN AS SHOWN BELOW AND THE<br />
CUP WILL POP OUT THE BOTTOM
RE FITTING THE SAYBERSKIN (2)<br />
3) IF THE SAYBERSKIN CUP IS NOT REACHABLE<br />
YOU CAN ENTER MAINTENANCE MODE WITH THE SAYBERX<br />
I) POWER ON THE UNIT<br />
II) PRESS AND HOLD BOTH INCREASE AND DECREASE SPEED<br />
BUTTONS TOGTHER UNTIL THE CUP IS POSITIONED AT THE TOP
SAYBERSKIN CUP<br />
1) OPEN THE SAYBERSKIN CUP<br />
2) ENSURE THE SAYBERSKIN IS POSTIONED<br />
CORRECTLY (THIS SIDE UP)<br />
3) CLOSE THE SAYBERSKIN CUP AND<br />
ENSURE ITS LOCKED CORRECTLY
RE FITTING THE SAYBERSKIN (3)<br />
1) POSITION THE UNIT AS BELOW 2) DROP THE SAYBERSKIN AND<br />
CUP INTO THE UNIT,YOU SHOULD<br />
HEAR A CLICK<br />
3) NOW TURN THE UNIT UPSIDE DOWN AND ENSURETHE<br />
SAYBERSKIN CUP IS LOCKED IN PLACE WITH THE TWO CLIPS
RE FITTING CAPS<br />
1) WITH THE SAYBERSKIN CUP NOW LOCKED IN PLACE<br />
RE FIT THE BOTH CAPS AND YOUR GOOD TO GO.
DO’S AND DON’TS<br />
DO - ENJOY YOUR NEW SAYBERX<br />
DON’T - USE IN BATH. IT’S NOT WATERPROOF<br />
DO - USE LUBRICATION !!! DANGEROUS WITHOUT<br />
(WE TESTED LOTS AND GUN OIL IS OUR FAVOURITE)<br />
DON’T - USE THE SAYBERX WITH A RIPPED TORN<br />
OR DAMAGED SAYBERSKIN<br />
GET NEW<br />
CYBERSKIN HERE<br />
GET MORE<br />
LUBE HERE
TECHNICAL DATA / WARRANTY INFO /<br />
AND THE BORING STUFF<br />
WARRANTY<br />
The manufacturer warrants this product against defects in<br />
material and workmanship under normal use for a period<br />
of TWO years in EU countries, ONE year for all other<br />
international markets from the date of purchase.<br />
Contact for details.<br />
The warranty covers breakdowns due to manufacturing or design<br />
faults; it does not apply in cases such as accidental damage,<br />
however caused, wear and tear, negligence, adjustment,<br />
modiication or unauthorised repairs.<br />
If you have any question regarding a faulty unit or require further<br />
information please contact us at support@sayberx.com If a defect<br />
arises and a valid claim is received by sayberx within the warranty<br />
period, then sayberx will either repair the product, or exchange the<br />
product with one that is new or which has been manufactured from<br />
new or servicable used parts and is at least functionally equivalent to<br />
the original product. This warranty is limited to the end-user and is not<br />
transferable to, or enforcable by, any subsequent owner.<br />
Your country contacts for warranty:<br />
Addresses of all distributors and their contact details.<br />
AUS/USA/ASIA
TECHNICAL DATA / WARRANTY INFO /<br />
AND THE BORING STUFF<br />
NOTE: This equipment has been tested and found to comply with<br />
the limits for a Class B digital device, pursuant to part 15 of the<br />
FCC Rules. These limits are designed to provide reasonable<br />
protection against harmful interference in a residential installtion.<br />
This equipment generates uses and can radiate radio<br />
frequency energy and, if not installed and used in accordance with<br />
the instructions, may cause harmful interference to radio<br />
communications. However, there is no guarantee that interference<br />
will not occur in a particular installation. If this equipment does<br />
cause harmful interference to radio or television reception, which<br />
can be determined by turning the equipment off and on, the user<br />
is encouraged to try to correct the interference by one or more of<br />
the following measures:<br />
- Reorient or relocate the receiving antenna.<br />
- Increase the separation between the equipment and receiver.<br />
-Connect the equipment into an outlet on a circuit different<br />
that to which the receiver is connected.<br />
from<br />
-Consult the dealer or an experienced radio/TV technician for help<br />
Changes or modifications not expressly approved by the party<br />
responsible for compliance could void the user's authority to<br />
operate the equipment. This device complies with Part 15 of the<br />
FCC Rules. Operation is subject to the following two conditions:<br />
(1) this device may not cause harmful interference, and<br />
(2) this device must accept any interference received, including<br />
interference that maycause undesired operation.
TECHNICAL DATA / WARRANTY INFO /<br />
AND THE BORING STUFF<br />
This device complies with Industry Canada licence-exempt RSS<br />
standard(s). Operation is subject to the following two conditions:<br />
(1)this device may not cause interference, and(2) this device must<br />
accept any interference, includinginterference that may cause<br />
undesired operation of the device.<br />
Le présent appareil est conforme aux CNR d'Industrie Canada<br />
applicables auxappareils radio exempts de licence. L'exploitation<br />
est autorisée aux deux conditions suivantes :(1) l'appareil ne doit<br />
pas produire de brouillage, et(2) l'utilisateur de l'appareil doit<br />
accepter tout brouillage radioélectrique subi, même si le brouillage<br />
est susceptible d'en compromettre lefonctionnement.<br />
IC21551-SAYBERXMAN<br />
FCC ID: 2AIPPSAYBERXMAN<br />
IC21551-SAYBERXRING *<br />
FCC ID: 2AIPPSAYBERXRING *<br />
© 2016 Interactive Holdings LTD<br />
All rights reserved Sayber X and all associated logos and designs are trademarks or registered trademarks of Interactive Holdings Limited. All other trademarks<br />
or registered trademarks are the property of their respective owners.<br />
Interactive Holdings Ltd. Offices C-F 11/Floor. Hollywood Centre, 77-91, Queens Road West, Hong Kong.
VIDEO VERSION OF THIS MANUAL HERE<br />
iOS APP<br />
ANDROID