Hyperbit-BW-L21-Intsallation-Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
POWER CONNECTIONS<br />
STEP03<br />
Connect any 6 power cables from the power supply<br />
to the power connections at the top of the miner. Also<br />
ensure that the fan power cable from the fan at the front<br />
of the miner is connected to the 4 pin power output on<br />
the top of the miner.<br />
POWER UP<br />
STEP04<br />
Power on the PSU and wait approximately 30 seconds<br />
for it to boot and commence running.
Change language