EVAL_Product Catalogue 2018_70mb
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MOTOR<br />
EQUIPMENT<br />
LECTROTAB:<br />
The American company Lectrotab manufactures high quality electromechanical flaps systems and<br />
maintains partnerships with some of the largest shipyards. The new technology actuator of the flap is<br />
available in 2 sizes 10 "and 12", operates electromechanically (12-24VDC) without a hydraulic pump, with<br />
full movement speed 8sec the size 12 "and 5sec size 10". It is made of durable plastic to prevent corrosion<br />
and rust and has a mechanism technology "stop and lock" for precise blade movement stabilization and<br />
security. The presence of the hinge-bolt (pivot) in both the bottom and the top of the bottle facilitates its<br />
placement regardless of the inclination of the mirror-bracket. The motor is completely watertight in the<br />
bottle and no maintenance is required, providing smooth, perennial and trouble-free operation. Besides,<br />
Lectrotab offers lifetime warranty.<br />
SAFSC<br />
SETR-61<br />
Automatic Leveling Control<br />
CONTROL<br />
SWITCHES<br />
AUTO LEVELING CONTROL WIRING ALC-1<br />
(+) 12 or 24 VDC input power<br />
Use 14ga. wire<br />
12vdc = 15 or 20 amp fuse<br />
24vdc = 10 amp fuse<br />
This input voltage must match the voltage rating<br />
on the actuators being used.<br />
3.05”<br />
(77.5mm)<br />
(-) DC ground<br />
Use 14ga. wire<br />
3.15”<br />
(80mm)<br />
2.62”<br />
(66.5mm)<br />
AUTO LEVELING CONTROL (ALC) PROGRAMMING<br />
Program Mode Sequence<br />
ACTUATORS<br />
Function Enter Button Hold Adjustment Store Memory<br />
Calibration BOW UP + BOW DOWN 12s Begin calibration N/A<br />
Attitude Set N/A N/A Adjust tabs to best attitude Press AUTO 4s<br />
Gain Adjust RIGHT + LEFT 4s BOW UP + BOW DOWN RIGHT + LEFT 4s<br />
ADDITIONAL OPERATION FEATURES<br />
• Press AUTO to enter automatic leveling<br />
• Press AUTO mode again to enter manual mode so tabs may be<br />
adjusted manually<br />
• The ALC incorporates an “Adaptive system” to maintain<br />
optimum running attitude in varying sea conditions<br />
BLACK<br />
WHITE<br />
May use actuator extended cable<br />
length of 23’ (7m) or 28’ (8.5m)<br />
connecting directly to ALC-1<br />
Automatic Leveling Control.<br />
BLACK<br />
WHITE<br />
Ø 0.1875”<br />
(4.5mm)<br />
Mounting and wiring terminal<br />
hole sizes and location.<br />
Ø 2.00”<br />
(50mm)<br />
code<br />
Optional: Connection to ignition key switch to initiate automatic<br />
tab retraction. Note: Tabs will automatically retract if the boat is<br />
stopped after a few minute delay if this connection is not used.<br />
STBD ACTUATOR<br />
Also available is a “W4” cable assembly w/<br />
lengths of 20’ (6.1m), 30’ (9.1m) and 40’<br />
(12.2m) and a “HK” terminal block and hardware<br />
mounting kit.<br />
Typically used with 6’ (1.8m) actuator cable<br />
lengths.<br />
PORT ACTUATOR<br />
ALC-1<br />
description<br />
• Reducing speeds below planing speed the ALC will not<br />
attempt to control attitude<br />
Linear Devices Corporation<br />
11126 Air Park Road, Suite G, Ashland, VA 23005<br />
Toll Free: 1-888-LECTROTAB (532-8768) | Tel: 804-368-8428 | Fax: 804-368-8438<br />
www.lectrotab.com August 2014<br />
DC<br />
Voltage<br />
SAFSC<br />
Stroke<br />
Length<br />
mm<br />
Stroke<br />
Speed<br />
Distance<br />
from Bolt<br />
to Pin<br />
Cable<br />
Length<br />
(Feet/<br />
Meter)<br />
Upper<br />
Mounting<br />
Bracket<br />
SETR-61<br />
04354-3 ~5<br />
Lower<br />
Mounting<br />
Bracket<br />
04354-03-12 • The ALC automatically STANDARD starts correcting attitude ACTUATORS during 12V 2.25"/ 57 8 sec. 11.5"/292 23'/7m Standard Standard<br />
acceleration<br />
04354-03-24 STANDARD ACTUATORS 24V 2.25"/ 57 8 sec. 11.5"/292 23'/7m Standard Standard<br />
04354-04-12 SHORT ACTUATORS 12V 1.5"/ 38 6 sec. 10"/254 23’/7m Standard Standard<br />
04354-04-24 SHORT ACTUATORS 24V 1.5"/ 38 6 sec. 10"/254 23’/7m Standard Standard<br />
04354-05-12<br />
HEAVY DUTY<br />
ACTUATORS<br />
12V<br />
Code<br />
04354-01-SAFSC<br />
2.25"/<br />
57mm<br />
Overall<br />
Width<br />
79.4mm /<br />
3.125’’<br />
04354-01-SETR-61 100mm / 3.94’’<br />
04354-01-ALC-1 80mm / 3.15’’<br />
ROCKER SWITCH ACCESSORY/ REPLACEMENT PARTS<br />
Overall<br />
Height<br />
82.5mm /<br />
3.25’’<br />
86mm /<br />
3.38’’<br />
77mm /<br />
3.0’’<br />
Waterproof oval switch with position indicator<br />
Mounting<br />
Hole Cutout<br />
H57mm (2.25’’) x<br />
W51mm (2’’)<br />
D51mm / 2’’ -<br />
D63.5mm / 2.5’’<br />
8 sec. 11.5"/292 23’/7m<br />
Number<br />
of<br />
Stations<br />
Bolt, Nut &<br />
Washer<br />
DC<br />
Voltage<br />
Bolt, Nut &<br />
Washer<br />
04354-06 HEAVY DUTY TRIM TABS<br />
04354-08 ~10<br />
These racing trim tabs incorporate a 90° bend on all edges to provide unmatched strength and reliability.<br />
All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design<br />
eliminates the need for welding. The tabs are made of 304 stainless steel, with a gloss black powder<br />
coated finish.<br />
Color<br />
1 12/24V Black<br />
Έως 6 12/24V Black<br />
D50mm / 2’’ 1 12/24V Black<br />
STANDARD STAINLESS<br />
STEEL TRIM TABS<br />
code<br />
Tab Size<br />
inches cm<br />
04354-06-129 12Χ9 30x23<br />
04354-06-1212 12x12 30x30<br />
04354-06-1218 12x18 30 x 46<br />
04354-06-1224 12x24 30x61<br />
code<br />
04354-08-12<br />
cm<br />
Tab<br />
Size<br />
inches<br />
Volt<br />
12<br />
04354-08-24 24<br />
04354-09-12 12<br />
51x36 20x14<br />
04354-09-24 24<br />
04354-10-12 12<br />
04354-10-24 24<br />
boat<br />
length<br />
9 - 18m<br />
finish<br />
black<br />
mirror<br />
shape<br />
DISCOVER THE BLUE<br />
216 217
Change language