EVAL_Product Catalogue 2018_70mb

PROTECTION//PRESERVATION//CLEANING
DESALINATION
LUBRICATION
PAINTING
REPAIR
ADHESIVE // SEALING
ACCESSORIES
GENERAL
02398 01755 - 28
01755 - 34
GELCOAT TOUCH UP
SPRAY PAINT
High density special paint, in
a handy spray can, for quick
touchups of glass-reinforced
plastic areas treated with
gelcoat and polyester resin.
It gives a perfect, quick and
even coverage, and doesn’t
drip.
CODE
Content
02398 400 ml
ZINC SPRAY
For visual enhancement, repair
and protection against
corrosion of metallic surfaces.
Long-term protection and repair
of metallic surfaces. High
resistance to salt and water.
Resistant to temperatures up to
300 o C.
Content: 400ml
MATT CHEM - GELCOAT
PAINT
White paint that is specially formulated
for use on fiberglass
(epoxy resin, gelcoat and polyester
resin). Quick and easy
application saves you time
and effort. Fast drying. Good
coverage. Not flaked off with
time and respects the support’s
quality namely its texture and its
aspect. Resists to ultraviolet rays.
Colours : White Pure
150 ml. (spray)
REPAIR
04910 04909
TEAR – AID STRONG REPAIR PATCH
FOR MANY USES
Tear-Aid is a unique transparent repair patch for repairing tears
and holes in practically all materials. Tear-Aid is extremely
strong and very elastic. Tear-Aid is no temporarily solution, it is
a permanent repair patch. Tear-Aid repairs: tent cover, canvas,
rubber (inflatable-) boats, umbrellas, raincoats, jackets and
bags. But also products like aluminium, fiberglass and more. It
is available in two types, one suitable for all types of materials
except from pvc and vinyl and one suitable for pvc and vinyl.
Code
Length
cm
Width
cm
04909 30 7,6
04910 30 7,6
Type
Suitable for all materials
but NOT FOR PVC/VINYL
Suitable ONLY
for PVC/VINYL
01058
KIT REPAIR FIBERGLASS
Repair material based on polyester resin for the repair of polyester surfaces. The kit includes
fiberglass wool. Easy to apply with effective results.
HOW TO USE : Carefully clean the surface to be treated and make it rough with a proper
coarse grain abrasive paper. Mix the resin with 3% of hardener, use a brush to spread the compound
on the fibreglass wool, previously cut in the requested size; place the fibreglass wool on
the surface to rebuild and fill the missing parts; let the mixture to get hard after about one hour;
once the hardening has completed, the surface can be polished, filled and painted. Catalyst
process can develop some heat.
CODE
Content
01058 200 gr
Τ. +30 210 5590872 | E. export@eval.gr | www.eval.gr