Install vinyl stickers in seven steps

Install vinyl stickers in
seven steps!!!

Look for a perfect surface
Before taking any other step to install a printed window sticker or a
vinyl sticker, one must ensure that he/she have a clean, smooth and dry
surface.

Clean the surface properly
If the surface is not clean enough then your next job is to make the
surface spotless dirtless, non-oily and crystal and clear..

Mark the area
Once you are done with the above-mentioned tasks then mark a
particular area from that entire cleaned surface.

Remove that white paper
All kinds of promotional decals or stickers are often attached to
a white backing paper which actually protects sticker’s glue from
air and moisture.

Place the sticker
Now, slowly place the promotional window sticker inside that
marked area and fix it up there. Please do not forget to rub the
surface of the sticker with a squeegee or a credit card.

Peel the transparent tapes
Last but not least, slowly peel the clear transparent tape, of at a
comfortable angle. Please do it slowly and do not pull the sticker
itself from its surface.

Some extra care
You can use a pin or a sharp pointed object
to poke out the existing bubble. To get the
best results, do not try to adhere the
sticker under extreme hot or extreme cold
environment. The preferable temperature
to apply these car window stickers is 70-
degree Fahrenheit.