Clean Canon Pixma Printer Head 1-800-610-6962
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Canon</strong> printers come with a configuration of removable printer heads that<br />
comprises of ink cartridges. So, to print few pages in both black as well as in<br />
colored pattern at least once per week is necessary to keep ink flowing smoothly<br />
and thus prevent it from unwanted clogging. This blog will take you through few<br />
steps to <strong>Clean</strong> <strong>Canon</strong> <strong>Pixma</strong> <strong>Printer</strong> <strong>Head</strong> that will be quite easy for users to<br />
understand. But, let us have little bit more information about the print-head. If the<br />
printer head nozzles are blocked in some or the other way or even if it is in dry<br />
state, users will need to dissolve all of the dry ink to avoid clogging. Well, an inkjet<br />
nozzle is built up with diameter of approximately 45 microns which has ability to<br />
clear up all clogs or streaking effects by running the cleaning cycle found in the<br />
printer’s software utility. Here we have multiple steps to resolve this issue and<br />
below are the most popular guidelines given for users to deal with the problem.<br />
USA:+1-<strong>800</strong>-213-8289 Toll free
Step 1: -<br />
Navigate to the “properties” menu first and then select the “Maintenance”<br />
tab. Click to choose the “<strong>Clean</strong>ing” icon and follow all given instructions<br />
carefully to clean the appropriate Ink Group. It is advised by <strong>Canon</strong> <strong>Printer</strong><br />
Technical Support professionals that users need to execute this step several<br />
times before the improvement to be taken place.<br />
Step 2: -<br />
Now, click to choose the “Deep <strong>Clean</strong>ing” menu if the simple cleaning<br />
method did not work out for you. Now, select the appropriate “Ink Group” to<br />
follow the instructions guided for performing deep cleaning operations. The<br />
“Deep <strong>Clean</strong>ing” process needs to be executed several times to have<br />
successful operation. If “<strong>Clean</strong>ing” and “Deep <strong>Clean</strong>ing” does not seems to<br />
be working out then, clear the print-head, remove it and then, clean it on<br />
manual mode.
Step 3:<br />
Lift up the printer cover slightly to move the print carriage towards<br />
the center position. Press the tab carefully on each of the cartridge<br />
and then lift to remove the cartridge gently.<br />
Step 4:<br />
Lift the lock in order to release the print-head and again lift the<br />
print-head out of the cradle.<br />
Step 5:<br />
Now, rinse the print-head with the help of hot water and remove<br />
any unwanted ink as well as paper residual that may be stuck at the<br />
bottom of the head. It is suggested to bleach until water runs out<br />
to be clean completely. Remove all the screws from the ceramic<br />
plate, located at the bottom section of the printer’s head.
Step 6:<br />
Move out the ceramic plate from the printer by applying gentle<br />
pressure and apply hot water on the plate. Remove any buildup<br />
issue that are there on the plate. Rinse it with water<br />
Step 7:<br />
Reassemble all of the print-head and then re-insert them into its<br />
cradle carefully. Lower the locking lever until it is snapped into<br />
place and then reinstall ink cartridges.<br />
Step 8:<br />
At last, close your printer cover and perform a proper alignment<br />
process as recommended.<br />
TOLL FREE+1-<strong>800</strong>-213-8289
Contact Info<br />
Address : USA<br />
Email :<br />
support@printertechsupportnumbers.<br />
com<br />
Phone : 1-<strong>800</strong>-213-8289
Change language