fiber and connectivity

Connectivity
Is it time to consider Fiber Optic cables for AV?
Fiber cables, end points and accessories explained

Copper based Category cable vs Bandwidth
The end of 2017 saw the advent and introduction of
the new HDMI 2.1 standard by the HDMI forum
association. They have nearly 100 member
company’s such as Netflix, Microsoft, Philips,
Crestron, Extron, Sharp, Sony, LG, Intel and many
more that are signatories to this new HDMI
specification standard. This standard is to support
inter-operability between equipment and maintain
the future of HDMI technology.
New end-to-end HDMI technology using 8K and 4K
solutions now require higher refresh rates in a single
cable for a seamless integration within HDMI
equipment.
HDMI Signal Development
from composite video to 4K & 8K signals
Future proof your
installations with ber
cable infrastructure as
new technology drives
video streaming over 4K
to 8K and beyond.
Copper cables cannot
manage that effectively
2 www.avdistributors.com.au
www.avdistributors.com.au

Field Terminable Fiber Optic Cabling Solutions
Fiber vs Copper - Fiber optics is the means of connectivity that will support our ever-increasing
requirements for data and connection speed. This demand increases exponentially every day, with
increased consumption of information and access to communication that only a decade ago, many of us
could have only dreamed of. We all witnessed the "Analog Sunset" with video, and now realise that the
"Copper Sunset" is occurring today. Fiber optics is the true means of all connectivity.
Why Fiber Cable vs Copper Cable
Security
Fiber cable is immune from
copper security leaks.
Noise
Fiber cable is immune to EMI
and RF interference.
Distance
Reticulate Fiber cable much
further than copper with less
bandwidth loss.
Cost
New cable - like Cleerline SSF
ber cable is a similar cost to
high end Category cable
TM
Easy
Lightening
Fiber cable is immune from
lightning induced interference.
Easy
Fiber cable is now incredibly
easy to terminate and work
with. No longer the exclusive
of specialized ber companies.
Bandwidth
Denitely the most important feature of Fiber cable systems, is
Bandwidth. Today’s and tomorrow technology is screaming for greater
bandwidths and faster networks. Fiber has not even been able to test
the limits of this, so FUTURE PROOF your installations!
Why would you NOT upgrade to using ber cable?
The exponential change to high
resolution TV adoption has just
begun and will surpass standard
denition TV’s usage by 2020!
HDMI 2.1
HDMI 1.0
4.5 Gbps
1000p
HDMI 1.3 HDMI 1.4
9 Gbps
9 Gbps
Deep Color 3D & 4K30
HDMI 2.0
18.0 Gbps
4K60
48.0 Gbps
10K, 8K, 5K, 4K
2
FRL m FEC
Dynamic HDR
Game Mode
VRR
Cat 3 Cable &
Connector
www.avdistributors.com.au
3

Cleerline redenes optical ber cable
Cleerline Fiber optic cable
Cleerline Technology Group has redened how optical cable can be installed and terminated.
Cleerline glass bers incorporate a patented polymeric coating that is an integral part of the optical
glass ber.
Cleerline ber optic cables meet - and in almost all cases, exceed - all requirements for both
Multimode and Singlemode ber optic cabling industry standards.
Standard Fiber vs.
TM
SSF
Cleerline Fiber
Stronger:
10,000 times the bend longevity and up to 200 times the durability, allows technicians to treat
TM
Cleerline’s SSF ber optic cable with no fear of failure.
Safer:
The Cleerline ber, with its smaller glass-cladding layer, is far more exible and forgiving. The coated
cladding around the core will NOT puncture the skin.
Faster:
TM
Normally technicians can easily learn to terminate SSF cable with excellent quality terminations for
on the job site jobs.
Debunking the Myth - that ber cable installations is the exclusive privilege of specialized companies
900um Buffer
Proprietary Polymer
Cladding
250um Acrylate
Core
Core
Cladding
250um Soft Peel
Traditional Fiber-Optic cable
Cleerline SSF Fiber-Optic cable
Cleerline Fiber optic cable
By the metre or by the Roll
Available in cut lengths or by the 305
Meter roll. Simplex or duplex cable in
standard breakout cable types. Also
available as armoured - for burial - or
tactical cable - for harsh, abrasive etc.
type environments.
4 www.avdistributors.com.au

Most popular ber connectors
SC: A 2.5mm snap-in connector widely
used in single mode systems for its
excellent performance and in multimode
systems because it was the rst
connector chosen as the standard for
TIA-568. It is a snap-in connector that
latches with a simple push pull motion. It
is also available in a duplex conguration.
Making off a ber end point
Step 1 - Open snap connector & feed back clamping cable ferrel onto cable
TM
ST: A 2.5mm AT&T designed
connector for single and multi-mode
networks. It has a bayonet mount and a
long cylindrical ferrule to hold the ber.
Most ferrules are ceramic, but some are
metal or plastic.
Step 2 - Strip polymer peel with nger nails and cut ber on cleaver
LC: A Lucent connector uses a 1.25mm
ferrule, half the size of the ST and SC.
Otherwise, it is a standard ceramic
ferrule connector, favoured for single
mode. It is also the connector of choice
for multimode transceivers for gigabit
speeds and above.
Step 3 - Fit into connector and snap shut and cut excess braid
FIBER OPTIC TERMINATION KITS
Fiber termination is no longer a specialist task!
The new Cleerline SSF cable is easily terminated on site, far
quicker, more secure, and safer than typical copper CAT
connector termination processes.
Terminate anywhere on site into patch panels, communication
outlets, ber-to-the-desk and distribution frames, direct
termination to equipment, ber cable repair, campus
infrastructure wiring as well, as customer access terminal
network infrastructure.
SSF-FKIT02E
Basic Fiber Termina on kit
Cleerline Termination Tool Kits
Two different kits are available, offering all the tools needed for
simple on site termination in a handy tool bag.
Use either the smaller basic soft tool bag with only a few tools,
or the professional hard case for a more comprehensive kit.
SSF-FKIT03P
Professional Fiber Termina on kit
SSF-TKITE-300
Basic DB Loss Tester
New Cleerline Testing equipment
The Basic dB loss tester is supplied in a hard case and may be
used as a light source at one end of the completed cable, and a
test metering system to measure dB loss on the other end for
both single mode and multi-mode.
The professional model is also supplied in a hard case and
offers data recording showing dB loss for both single mode and
multimode cables.
SSF-TKITP-400
Pro Data Recording
Cleerline recommends using either multimode or single-mode bers appropriate to
installation requirements and running multiple strands to each location. Many AV
electronic equipment manufacturers have standardized on multimode Om3 ber cable.
www.avdistributors.com.au
5

FiberPlex is your source for the latest in digital communication and ber optics equipment.
FiberPlex Technologies are innovators who will do everything in their power to ensure that you find a solution for your
specific needs. All of the products have originated from the detailed needs of FiberPlex clients, so it is understood that
certain applications need more than the off-the-shelf treatment.
From being pioneers in the beginning of ber technology to innovating for the new ber connected world.
They take a custom solution approach to augment their equipment. With expertise in communication standards, fiber
conversion, EMI/RFI isolation, and TEMPEST, their engineering staff will work with you to create exactly what you need to
solve your connectivity needs.
Virtually every corner of the globe is using fiber. From applications as diverse as zoned audio for institutions to worldwide
communications networks are all embracing the advantages of fiber backbone systems.
Fiberplex TD (Throw Down)/FOI products
TD-6010 - 12.5Gbps Flexible Interface SFP/SFP+
Transceiver Workbox
The true “Swiss Army Knife” of ber optic
transport, the TD-6010 (in conjunction with
any combination of a myriad of FiberPlex or
third party SFP/SFP+) optical & electrical
modules, allows you to transport what you
want, when you want it, how you want it,
wherever you want it; all over one product solution.
The FiberPlex TD-6010 and SFP/ FP+module should be in
everyone’s toolbox.
The FOI-6010 facilitates interface between virtually any ber optic devices. You
simply choose the SFP modules you need for your application - the FOI-6010 does the rest.
End points
Typical Fiber installation
End points
Fiber cable
Various SFP
Modules
Installation Options
Various SFP
Modules
DIN Rail (can accommodate power
supplies)
6 www.avdistributors.com.au
19" Rack mount options for
6 units with power supplies
NEMA 4x Industrial Rated Enclosure
for 3 units plus power supplies
www.avdistributors.com.au

Light Viper - The standard in the Staging Industry!
LightViper 32×8 ber-optic transport system
The system is normally used as a transport for
STAGE to FOH, with or without splits. This device
contains 32 mic/line inputs (sends) and 8 analog line
level outputs (returns). There is a 3 position gain
switch for each input that sets the gain of the mic-pre.
Each input has an associated LED indicator which
begins ashing red 3dB before clipping. There are 4
+48v phantom power on/off switches with
associated on/off LED indicators.
Phantom power is applied in groups of 8 inputs.
The VIS-1832 is supplied with a pair of
transmit/receive LC ber connectors (other connector
types possible). Two optical splits come standard. These splits (transmit only) are presented on single LC
connectors. The VIS-1832 will operate at 48k or 96k.
The “control” connection is a TTL data port, which appears on an EtherCon® connector. It allows
LightViper accessory devices such as the DMX4o (DMX lighting control) or MD3 (RS422/232/MIDI) to be
®
connected to the unit. The EtherCon output of the DMX4i or RJ45 on the MD-3 is input to the VIM-1832
®
via the “control” EtherCon connector, combined with the audio input data, and transported via ber to the
®
VIS-1832. This data is then output from the “control” EtherCon connector on the VIS-1832, and input into
a DMXo or MD-3, where the TTL data is translated back into the original format. AC power is via Neutrik
®
PowerCon connector. The VIS-1832 has an available rack mount kit (VER-1832) as well as a 19” rack
mount chassis version (VRK-1832). The unit can operate at any voltage 50-60Hz, 90-250v AC.
Active Wave Division Multiplexer 8 or 16 Ch
Simply put, it is a device which allows the user to
combine up to 16 sources of data on a single ber pair.
Each channel can be linked via ber with selected
FiberPlex FOM, FOI or TD Series ber
modules, FiberPlex LightViper or with virtually any third
party ber optic equipment, with data rates from 155
megabits up to 3 gigabits per channel, for a possible
maximum aggregate data rate of 48 Gbps. Alternately, the
WDM can be combined with our vast selection of copper SFP modules and connect HD Video, ethernet,
audio and more directly into a channel.
Differences between WDM16 and WDM8A
The functional and physical characteristics of the WDM16 and WDM8A are largely identical. The single
differentiator is the number of Active Wave Division channels and the associated internal wavelengths that
are supported. The chassis dimensions and power supplies remain identical. The WDM16 supports all of
the 16 standard CWDM wavelengths of 1310-1610 nm, whereas the WDM8A supports only 8 of those
channels, so the installation can be scaled to the appropriate size. The WDM8A supports the upper 8
wavelengths 1470-1610 nm. Because of the enormously exible active nature of the WDM16/8, the
wavelengths of the internal channels are basically invisible and even irrelevant to the end user.
www.avdistributors.com.au
7

Emerging technologies are growth engines
TechLogix helps your business leverage tomorrow's technology today.
TechLogix specializes in signal distribution technology, from basic signal splitters to leading-edge bre
optic extenders. Their products are specially designed for education, corporate AV, general collaboration
and high-end residential applications.
Splitters
Solutions for distributing the latest HDMI 2.0 / HDCP 2.2 singals. Models include 1x2, 1x4 & 1x8
distribution.
Extenders
Solutions for distributing HDMI, DVI & USB over both twisted pair and bre optic cabling.
TechLogix specializes in the latest 18G technology, including both VLC compressed & fully
uncompressed technology.
Collaboration Systems
All-in-one solutions for meeting rooms, huddle rooms, conference rooms, classrooms & other
collaborative environments. TechLogix systems can be installed and operated by virtually anyone
with little to no training.
Architectural Connectivity & Controllers
Solutions for managing signals throughout the collaborative space, including table inserts, wall
controllers & automated controllers. TechLogix offers a variety of unique products which help value
engineer and streamline almost any installation.
Switchers
Presentation switchers specically designed for collaborative environments, including automatic
switchers, switcher scalers & automated controllers. TechLogix offers a variety of sizes, from 2x1s to
6x1s.
Audio Ampliers & Converters
Audio reinforcement is central to any system, and TechLogix offers a variety of audio solutions
specically designed for collaborative environments. Solutions include 8 ohm & 70V mixer/ampliers
& audio de-embedders/decoders.
Signal Distribution over Fibre Optics
TechLogix is leading the industry in Media over Fibre Optics with a
comprehensive line of HDMI, DVI & USB over bre solutions. They
were one of the rst manufacturers to offer fully uncompressed HDMI
& control distribution, as well as backwards compatible SuperSpeed
USB extension.
TechLogix solutions include: HDMI over bre extenders, DVI over bre
extenders, USB over bre extenders, AV over IP built on a 10G
network, as well as a complete line of bre optic cabling & network
accessories. The complete list of products is available online.
TL-FO2-HDC
HDMI & control over fibre
VLC automa c compression
Swappable SFPs for extension up to 10k
TL-FO2-HDC2
HDMI & control over fibre
Fully uncompressed w/ ARC support
Extension up to 300m
TL-FO-USB3-01
SuperSpeed USB over fibre
USB 3.1 distribu on w/ built-in two port hub
Extension up to 100m
8 www.avdistributors.com.au

Share-Me Presenter Cables
Laptops, tablets & phones all feature different connection formats, and the variety can
wreak havoc on your meeting or classroom. Adapters often get lost or forgotten, leaving
you with an incompatible connection, a late meeting or a botched presentation.
TechLogix Share-Me Presenter Cables ensure you always have the right adapter on
hand.
A secure ring locks your adapters directly onto an HDMI cable, ensuring they stay put
and your meetings start on time. The complete list of products is available online.
TL-SMPC-07
HDMI, USB-C, DisplayPort
& mini-DisplayPort
Share-Me Table Inserts
Forget cheap plastic table grommets. TechLogix table inserts are a durable, stylish &
affordable accessory for tables, desks, podiums & other collaborative surfaces. Models
include connections for HDMI, VGA, DisplayPort & USB, and each unit is manufactured
from furniture-grade aluminum with a Snagless under-table mounting design. The
complete list of products is available online.
TL-TI-HD
HDMI
TL-TI-PUSB
USB fast charging
Share-Me Table Insert Collaboration System
Forget complex & expensive collaboration technology. TechLogix SM Series systems are
simple to install and even easier to use. HDMI, VGA and DisplayPort table inserts provide
connectivity for tablets, laptops & other portable devices, and two buttons control the
entire AV meeting experience. Zero programming is required for up to three stations of
collaboration.
Discover how TechLogix is transforming meeting rooms, conference rooms, huddle
rooms, classrooms & any other collaborative environment. The complete list of products
is available online.
TL-SMKIT-04
three sta on HDMI + VGA collabora on systems
Share-Me Table-Top Collaboration System
The latest release in their Share-Me Series, the SMP system combines a presentation
switcher, HDBaseT extender & display controller into a single, easy-to-use table top
collaboration hub.
Available in digital and analog+digital models, the SMP provides a single all-in-one
interface for meeting rooms, huddle rooms & other collaborative environments.
TL-SMP-HDV
HDMI + VGA collabora on system
18G HDMI over Twisted Pair Extenders
Twisted pair extenders are not all created equal. TechLogix leads the
industry in VLC processing development, allowing high-bandwidth 18G 4K
60 signals to transmit over twisted pair.
This unique technology senses signals over 10G and automatically
compresses the color space for transmission over lower bandwidth cables,
such as Cat 5 and Cat 6. After transmission, the color space is then
decompressed back to the original, full bandwidth.
TL-TP40-HDC2
HDMI & control over twisted pair
VLC automa c compression
4K 60 extension up to 40m
TL-TP100-HDC2
HDMI, control, Ethernet over
twisted pair
VLC automa c compression ARC &
audio embedding/de-embedding
Extension up to 100m
In-line Automated Controllers
The TechLogix TL-INCT-01 is an in-line controller that “senses” any HDMI activity in the
room and automatically outputs control commands to connected devices via built-in CEC,
RS232 & relay controllers. Commands are fully customizable and simultaneously output
via an HDMI port (CEC), RS232 port, and/or dual logic relay ports.
Slim-line Presentation Switchers
TechLogix offers a complete line of presentation switchers, including solutions for both
digital and analog signals. Their most popular model, the TL-4X1-HD2, offers automatic
switching from four HDMI inputs to one HDMI output. Built-in audio de-embedding and IR
& RS232 control make the TL-4X1-HD2 incredibly versatile.
TL-INCT-01
in-line automated controller
TL-4X1-HD2
4x1 HDMI automa c switcher
www.avdistributors.com.au
9

All-in-One Meeting & Classroom Systems
The TechLogix CAV System is affordable, easy to install, intuitive to use and powerfully effective
as a presentation and room audio-visual signal management tool. The system includes both
audio and video routing and control, and only requires a single twisted pair cable to connect all
of the components. Best of all, a simple wall plate controller provides users with volume control
and source selection, and automatic modes of operation ensure the system is easy enough for
anyone to operate. The single CAV package replaces hours of design and installation work, and
the all-in system price is unrivaled in the education and corporate AV technology markets.
TL-CAV-01
all-in-one system
Connect ‘Source’ to
your source device
Laptop / Desktop PC
BluRay / DVD
Active Optical Cables for Educational, Commercial
and Residential Audio-Video Installations
Active optical cables (AOCs) are a relatively new option in the
data transmission world. Their basic purpose is to combine the very high data
transfer rates, long transmission distance,
reduced weight, and low EMI of optical ber with the simplicity of a copper
cable. AOCs allow the use of optical ber technology without any special user
training. They plug into the standard electrical ports of source and sync devices,
including HDMI, DisplayPort, and USB
Connect ‘Display’ to
your display device
UHD TV / UHD Monitor
Detachable HDMI Optical Interface is perfect for
those conduit pull jobs where a moulded
connector simply will not t through the pipe.
Rather than worry about how this is going to be
achieved and being concerned with terminating
ber, detach the Micro HDMI connector from its
housing and send it through the pipe. Once on the
other side, connect it up again for full 1080p
support up to 100m.
Chromis Fiberoptics is the leading provider of Graded-Index
Polymer Optical Fiber (GI-POF) Active Optical Cables (AOCs) for
highspeed data transmission in digital signage, commercial and
residential audio/video, mobile computing, consumer electronics and
data center applications. An AOC has the same electrical inputs as a
traditional copper cable, but uses optical ber for high-speed data
transmission “between the connectors”. The connectors perform
electrical-to-optical conversion at the source and then reverse it at
the destination.
Active Optical Cables with full termination ends
®
Chromis state-of-the-art GigaPOF active optical cables support the
continuing evolution of education technology in K-12, higher
education, distance learning and corporate training centre
environments.
Commercial A/V design/build integrators and installers now have a
simple and inexpensive way to connect high-denition video sources
®
to displays over longer distances. Chromis patented GigaPOF
technology enables high-speed video signal transmission in plugand-play
cables at distances up to 100 metres (328 feet).
Active components in the connectors perform electrical-to-optical
signal conversion, drawing power from the same standard interface
ports as copper cables – no external power connectors, network
cabling or video extenders needed.
10 www.avdistributors.com.au

www.avdistributors.com.au
11