Product Catalogue 2018-2020

Accessories for MPB 4400
Ordering Information
Description Order No. Price € + VAT
89
Pedestrian request push-button (for MPB 4400 and EPB)
Pedestrian request push-button with LED light and fastening tube,
completely wired, including 3.5 m cable with angled 4-pin EVG plug.
MP 4030
163,00
Mast holder for pedestrian request push-button
MP 4031
47,00
Pedestrian request push-button with fastening tube, completely
wired, including 4 m cable with angled 4-pin EVG plug
EP 6005A
163,00
90
Interface for control printer for up to four signal groups
This interface can be used to transfer the data via the optical
interface between traffic light and printer respectively between
traffic light and laptop. If a printer is connected to the interface,
the following printouts can be selected: actual signal timetable,
nominal signal timetable, interim time matrix, program switching
points, fault report and green / green locking matrix.
Interface for printing up to four signal groups.
MP 4016
505,00
Interface for control printer for up to twelve signal groups
and laptop
As order no. MP4016. If a laptop is connected to the interface,
up to twelve signal groups can be programmed.
Interface for printout and programming of up to twelve signal groups.
„AmpelTools“ laptop
programming software
can be found on page 37.
MP 4017
708,00
91
Control printer for up to four signal groups
for traffic light system MPB 4400. With this control printer, all data
can be printed directly from the controller via interface MP 4016.
All printouts are possible as described above. Power is supplied
by integrated batteries or a plug-in power supply unit. MP 4015 822,00
32