CAROSLEEVE Flyer (PDF, 0.2 MB) - CARO-PROMETA ...

CAROSLEEVE – Filling-Chamber System
CAROSLEEVE has been specially developed for die
casting to reduce resetting costs and to extend the tool life:
Characteristics:
• Quick change sleeve at the filling point
• Special heat treatment
• Selection of high-quality materials for different aluminium
alloys
Advantages of this system:
• Will not crack, especially during machining, as no direct
heat drilling is used
• Thermal distortions are eliminated due to structural
adjustments
• Quick sleeve change at the machine results in very short
production interruptions
• Simple indirect tempering of the problem zones at the
filling area
• Chambers can be reworked
Druckguss - Technologiezentrum
Service:
• Service center for the rework and assembly of the filling
chambers
• Advisory service, process development and construction
• System provider for die-casting technology: e.g. diecasting
pistons, piston rods, damper- and quick-coupling
systems, vacuum-casting and magnesium-casting systems

CAROSLEEVE – Filling-Chamber System
Fax information
(Please copy and send to +49 9129 4006-33)
Our products stand for long life and high product quality.
Please mark the products for which you need additional
information.
Please select:
Die-casting plunger
Vacuum piston
Magnesium piston
Piston rod
Absorption- and quick-action coupling
Address:
Casting chamber
Casting chamber for vacuum systems
Dispensing unit for lubrication of pistons
Die sets / slide bearings
CARO-PROMETA Metallvertriebs GmbH (A company of the Wieland Group) www.caro-prometa.de
Wilhelm-Maisel-Str. 20a, 90530 Wendelstein, Germany, Phone +49 9129 4006-0, Fax +49 9129 4006-33, info@caro-prometa.de
Please do not hesitate to contact us in case of questions.
We will gladly help you to solve problems and optimise
your casting process.
General manufacturing programme for non-ferrous
metals
This data sheet is for your general information only and is not subject to revision. No claims can be derived from it unless there is evidence of intent or gross negligence.
The data given are no warranty that the product is of a specified quality and they cannot replace expert advice or the customer‘s own tests.
01.12 CAROSLEEVE (GSW/En)