HS 200 - Beyerdynamic

HS 200
Aviation Headset
FEATURES
Ambient noise attenuation of approx. 30 dBA
Noise-cancelling microphone with adjustable gain
Balanced sound with high reproduction precision
to ensure excellent speech intelligibility
Integrated volume control
Rugged headband design made of spring steel with soft,
replaceable headband pad
Moderate headband pressure (approx. 8 N) for
maximum comfort
Light weight of approx. 325 g (without cable)
Modular construction for easy servicing
Five-year warranty
APPLICATIONS
The HS 200 Trend is a closed-back aviation headset with an
ambient noise attenuation of approximately 30 dB for the use in
propeller and turboprop aircrafts (HS 200 Trend) as well as helicopters
(HS 200 Rotor). The headphone features a very high reproduction
precision and a balanced sound. Another special feature is the wide
frequency response of 5 - 30,000 Hz.
The soft, circumaural ear pads and the adjustable padded headband
provide a high comfort. The microphone with adjustable gain
can be optimally positioned with the flexible gooseneck. The
figure-eight polar pattern ensures a very good noise cancellation.
The rotating microphone holder allows positioning the microphone
on the right or left hand side.
The single-sided connecting cable provides an integrated volume
control to adjust the volume of the headphone.
The HS 200 is available in two versions: As HS 200 Trend it provides
two jack plugs for connecting and as HS 200 Rotor it is fitted with
an U-174/U jack plug.
1 of 2
beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 224
info@beyerdynamic.de | www.beyerdynamic.de
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E3/HS 200 (07.12)
TECHNICAL SPECIFICATIONS
Headphone
Transducer type . . . . . . . . . . . . . . . . . . . Dynamic
Operating principle . . . . . . . . . . . . . . . . . Closed
Frequency response . . . . . . . . . . . . . . . . 5 - 30,000 Hz
Nominal impedance mono . . . . . . . . . . . 125 Ω
Nominal SPL . . . . . . . . . . . . . . . . . . . . . . 105 dB
T.H.D. . . . . . . . . . . . . . . . . . . . . . . . . . . . < 0.2%
Power handling capacity . . . . . . . . . . . . . 100 mW
Sound coupling to the ear . . . . . . . . . . . Circumaural
Ambient noise attenuation . . . . . . . . . . . approx. 30 dBA
Nominal headband pressure . . . . . . . . . . 8 N
Microphone
Transducer type . . . . . . . . . . . . . . . . . . . Condenser
(back electret)
Frequency response . . . . . . . . . . . . . . . . 400 - 15,000 Hz
Polar pattern. . . . . . . . . . . . . . . . . . . . . . Figure-eight
Output voltage at 1 kHz . . . . . . . . . . . . . 1 - 11 mV/1 Pa,
adjustable
Max. SPL. . . . . . . . . . . . . . . . . . . . . . . . . 120 dB
Nominal impedance . . . . . . . . . . . . . . . . approx. 350 Ω
Current consumption . . . . . . . . . . . . . . . approx. 6 - 18 mA
Supply voltage . . . . . . . . . . . . . . . . . . . . typ. 16 V DC
(8 - 16 V DC,
acc. to RTCA/DO 214)
General
Weight without cable / audio box . . . . . . approx. 325 g
HS 200 Trend cable. . . . . . . . . . . . . . . . . 1.80 m, single-sided
HS 200 Trend connection
Headphone. . . . . . . . . . . . . . . . . . . . . . . 1/4" stereo jack plug
(6.35 mm)
Microphone . . . . . . . . . . . . . . . . . . . . . . PJ-068 jack plug
HS 200 Rotor cable. . . . . . . . . . . . . . . . . Coiled cable, single-sided
HS 200 Rotor connection . . . . . . . . . . . . U-174/U jack plug

HS 200
VERSIONS
HS 200 Trend Pilot headset with
two jack plugs. . . . . . . . . . . . . Order # 499.323
HS 200 Rotor Pilot headset with
U-174/U jack plug . . . . . . . . . . Order # 489.611
SUPPLIED ACCESSORIES
Padded bag
Wind shield for the microphone
Screwdriver to adjust the microphone gain
Warranty card
FREQUENCY RESPONSE & POLAR PATTERN
This frequency response curve (measuring tolerance ± 2.5 dB) and polar pattern correspond to a typical production sample for this
microphone measured at a distance of 2 cm.
2 of 2
Frequency response curve ± 2.5 dB HS 200 microphone 0 dB = 1 - 11 mV / 1 Pa
HS 200 microphone
beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 224
info@beyerdynamic.de | www.beyerdynamic.de
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E3/HS 200 (07.12)
SPARE PARTS
EDT 300 KS Ear pads, leatherette,
black . . . . . . . . . . . . . . . . . . . . . Order # 900.699
EDT 600 SS Ear pads, leatherette
viscoelastic, black. . . . . . . . . . . . Order # 904.872
EDT 300 GS Ear pads, gel-filled,
black . . . . . . . . . . . . . . . . . . . . . Order # 900.799
EDT 300 GT Ear pads, gel-filled,
transparent . . . . . . . . . . . . . . . . Order # 900.780
EDT 300 LR Ear pads, leather, blood-red . . . . Order # 900.710
EDT 300 LB Ear pads, leather, cognac . . . . . . Order # 900.729
WS 20 sw Wind shield, black . . . . . . . . . . . Order # 439.975