right tools • right place • right now - The Cat Rental Store
right tools • right place • right now - The Cat Rental Store
right tools • right place • right now - The Cat Rental Store
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1-866-285-5550<br />
WWW.CATRENTS.CA
RIGHT TOOLS. RIGHT PLACE.<br />
RIGHT NOW.<br />
Pacific Ocean<br />
Yukon<br />
British Columbia<br />
Terrace<br />
North<br />
Vancouver<br />
Coquitlam<br />
Vancouver<br />
Langley<br />
Prince George<br />
Fort Nelson<br />
Fort St. John<br />
Dawson Creek<br />
Kamloops<br />
Kelowna<br />
Northwest<br />
Territories<br />
Grande Prairie<br />
Hinton<br />
Peace River<br />
Alberta<br />
U n i t e d S t a t e s o f A m e r<br />
Sparwood<br />
High Level<br />
Wabamun<br />
Cochrane<br />
Calgary<br />
Wabasca<br />
Slave Lake<br />
Yellowknife<br />
Fort McMurray<br />
Bonnyville<br />
Fort Saskatchewan<br />
Edmonton<br />
Lloydminster<br />
Saskatchewan
• Administration<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
Unit #300, 11634 - 142 Street<br />
Edmonton, AB<br />
T5M 1V4<br />
Ph. (780) 989-1301<br />
Fx. (780) 989-1304<br />
T.F. 1-866-285-5550<br />
• Bonnyville<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
6002 - 50th Avenue<br />
Bonnyville, AB<br />
T9N 2N4<br />
Ph. (780) 826-3777<br />
Fx. (780) 826-6002<br />
T.F. 1-866-285-5550 ext. 11<br />
• Calgary<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
11560 - 42 Street SE<br />
Calgary, AB<br />
T2Z 4E1<br />
Ph. (403) 640-4800<br />
Fx. (403) 640-4851<br />
T.F. 1-866-285-5550 ext. 31<br />
• Cochrane<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
131 - 2nd Avenue East<br />
Cochrane, AB<br />
T4C 2B9<br />
Ph. (403) 932-3821<br />
Fx. (403) 932-2725<br />
T.F. 1-866-285-5550 ext. 32<br />
• Coquitlam<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
Unit - K<br />
1100 - Lansdowne Dr.<br />
Coquitlam, BC<br />
V3B 5E2<br />
Ph. (604) 944-6642<br />
Fx. (604) 944-1267<br />
T.F. 1-866-285-5550 ext. 53<br />
• Dawson Creek<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
#4 Collins Road<br />
Dawson Creek, BC<br />
V1G 4H3<br />
Ph. (250) 782-1333<br />
Fx. (250) 782-1334<br />
T.F. 1-866-285-5550 ext. 41<br />
• Edmonton<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
9520 - 51 Avenue<br />
Edmonton, AB<br />
T6E 5A6<br />
Ph. (780) 989-1300<br />
Fx. (780) 989-1323<br />
T.F. 1-866-285-5550 ext. 22<br />
• Fort McMurray<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
Box 5632<br />
Hwy. 63, North of<br />
Confederation Way<br />
Fort McMurray, AB<br />
T9H 3G6<br />
Ph. (780) 743-5217<br />
Fx. (780) 791-1271<br />
T.F. 1-866-285-5550 ext. 12<br />
• Fort Nelson<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
P.O. Box 3690<br />
4601 - 55 Street<br />
Fort Nelson, BC<br />
V0C 1R0<br />
Ph. (250) 774-6812<br />
Fx. (250) 774-3812<br />
T.F. 1-866-285-5550 ext. 42<br />
• Fort St. John<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
10714 Alaska Road<br />
Fort St. John, BC<br />
V1J 1B3<br />
Ph. (250) 785-8700<br />
Fx. (250) 785-8702<br />
T.F. 1-866-285-5550 ext. 43<br />
• Fort Saskatchewan<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
11109 - 83 Avenue<br />
Fort Saskatchewan, AB<br />
T8L 3T9<br />
Ph. (780) 998-4040<br />
Fx. (780) 998-0998<br />
T.F. 1-866-285-5550 ext. 29<br />
• Grande Prairie<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
9501 - 116 Street<br />
Grande Prairie, AB<br />
T8V 5W3<br />
Ph. (780) 513-1245<br />
Fx. (780) 513-0378<br />
T.F. 1-866-285-5550 ext. 13<br />
• High Level<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
9801 Rainbow Blvd.<br />
High Level, AB<br />
T0H 1Z0<br />
Ph. (780) 926-3667<br />
Fx. (780) 926-3639<br />
T.F. 1-866-285-5550 ext. 16<br />
our locations<br />
• Hinton<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
156 Swanson Drive<br />
Hinton, AB<br />
T7V 1H1<br />
Ph. (780) 865-5700<br />
Fx. (780) 865-5742<br />
T.F. 1-866-285-5550 ext. 24<br />
• Industrial Services<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
17403 109 Avenue<br />
Edmonton, AB<br />
T9E 7R4<br />
Ph. (780) 979-0551<br />
Fx. (780) 955-8999<br />
T.F. 1-866-285-5550 ext. 28<br />
• Kamloops<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
955 McGill Road<br />
Kamploops, BC<br />
V2C 6E9<br />
Ph. (250) 372-7770<br />
Fx. (250) 372-7785<br />
T.F. 1-866-285-5550 ext. 63<br />
• Kelowna<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
1822 Spall Road<br />
Kelowna, BC<br />
V1Y 4R1<br />
Ph. (250) 860-3510<br />
Fx. (250) 862-2928<br />
T.F. 1-866-285-5550 ext. 62<br />
• Langley<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
9565 - 198 Street<br />
Langley, BC<br />
V1M 3B8<br />
Ph. (604) 888-5787<br />
Fx. (604) 888-9271<br />
T.F. 1-866-285-5550 ext. 52<br />
• Lloydminster<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
5101 - 62 Street<br />
Lloydminster, AB<br />
T9V 2E3<br />
Ph. (780) 875-7368<br />
Fx. (780) 875-7336<br />
T.F. 1-866-285-5550 ext. 23<br />
• North Vancouver<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
901 - West 3rd Street<br />
North Vancouver, BC<br />
V7P 3P9<br />
Ph. (604) 986-7822<br />
Fx. (604) 986-7821<br />
T.F. 1-866-285-5550 ext. 54<br />
• Peace River<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
8903 - 75 Street<br />
Peace River, AB<br />
T8S 0A5<br />
Ph. (780) 624-1577<br />
Fx. (780) 624-1578<br />
T.F. 1-866-285-5550 ext. 15<br />
• Prince George<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
2019 - 1st Avenue<br />
Prince George, BC<br />
V2L 2Z1<br />
Ph. (250) 562-9292<br />
Fx. (250) 562-4911<br />
T.F. 1-866-285-5550 ext. 44<br />
• Redwater<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
Box 1503<br />
4803 - 46 Street East<br />
Redwater, AB<br />
T0A 2W0<br />
Ph. (780) 942-2258<br />
Fx. (780) 942-2257<br />
T.F. 1-866-285-5550 ext. 30<br />
• Slave Lake<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
P.O. Box 918<br />
2200 - 8th Street N.E.<br />
Slave Lake, AB<br />
T0G 2A0<br />
Ph. (780) 849-5006<br />
Fx. (780) 849-6829<br />
T.F. 1-866-285-5550 ext. 14<br />
• Sparwood<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
P.O. Box 727<br />
641 Sparwood Drive<br />
Sparwood, BC<br />
V0B 2G0<br />
Ph. (250) 425-2469<br />
Fx. (250) 425-2449<br />
T.F. 1-866-285-5550 ext. 61<br />
• Terrace<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
4621 - Keith Road<br />
Terrace, BC<br />
V8G 1K3<br />
Ph. (250) 615-5405<br />
Fx. (250) 638-4623<br />
T.F. 1-866-285-5550 ext. 45<br />
• Trench Shoring Division<br />
9565 - 198 Street<br />
Langley, BC<br />
V1M 3B8<br />
Ph. (604) 888-5787<br />
Fx. (604) 888-9271<br />
T.F. 1-866-285-5550<br />
• Vancouver<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
1688B Main Street<br />
Vancouver, BC<br />
V6A 2W8<br />
Ph. (604) 228-7822<br />
Fx. (604) 228-7821<br />
T.F. 1-866-285-5550 ext. 51<br />
• Wabasca<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
Wabasca, AB<br />
Ph. (780) 891-3300<br />
Fx. (780) 891-3323<br />
T.F. 1-866-285-5550 ext. 18<br />
• Wirtanen Electric Division<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
14849 - 124 Avenue<br />
Edmonton, AB<br />
T5L 3B2<br />
Ph. (780) 434-8421<br />
Fx. (780) 437-2658<br />
T.F. 1-866-285-5550 ext. 26<br />
• Yellowknife<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
327B Old Airport Road<br />
Yellowknife, NT<br />
X1A 3T3<br />
Ph. (867) 920-7481<br />
Fx. (867) 873-6867<br />
T.F. 1-866-285-5550<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
1
2 1.866.285.5550
table of contents<br />
5 Why Rent From <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong>?<br />
6-11 Benefits Of Renting From <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> ®<br />
12 Aerial Work Platforms<br />
16 Air Equipment / Compressors<br />
18 Air Tools<br />
22 All-Terrain Vehicles & S<strong>now</strong>mobiles<br />
22 Carpentry<br />
24 Cleaning Equipment<br />
25 Compaction<br />
27 Concrete Equipment<br />
28 Detection Equipment<br />
29 Environmental Management<br />
29 Excavators<br />
30 Generators & Lights<br />
31 Instrumentation<br />
35 Ladders<br />
35 Landscaping<br />
36 Loaders<br />
37 Material Handling<br />
40 Modu-Loc Fence<br />
41 Moving<br />
42 Pipe Equipment<br />
43 Plumbing<br />
44 Pumps<br />
46 Safety Equipment<br />
47 Scaffolding<br />
47 Survey Equipment<br />
48 Temperature Control<br />
54 Temporary Power<br />
69 Track-Type Tractors<br />
70 Traffic Control<br />
70 Trailers<br />
71 Trench Shoring<br />
74 Welding<br />
75 Wrenches & Sockets<br />
76 Invoice Details<br />
77-84 Credit Application<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
3
our partners:<br />
4 1.866.285.5550
Why Rent<br />
F R O M<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong>?<br />
Minimize Costly Breakdowns<br />
Our fleets are loaded with newer, reliable equipment that<br />
is put through a rigorous maintenance routine by trained<br />
mechanics prior to each rental to ensure the most<br />
productive and reliable equipment possible reaches your<br />
job site.<br />
Complete Your Job More Efficiently<br />
Expect the latest technology from <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong>.<br />
We rent <strong>Cat</strong>erpillar and other top brands of equipment<br />
utilizing the most innovative ideas available today. Also,<br />
you will be using the <strong>right</strong> equipment to get the job done<br />
<strong>right</strong>. No more “just getting by” with the wrong equipment.<br />
No Equipment Obsolescence<br />
Equipment ownership can be costly. <strong>The</strong> value of<br />
equipment depreciates over time. Renting from <strong>The</strong> <strong>Cat</strong><br />
<strong>Rental</strong> <strong>Store</strong> allows you to use the latest technology<br />
equipment without the concern of costly depreciation.<br />
No more trying to get the job done with old, worn-out<br />
equipment.<br />
No Capital Investment<br />
Renting frees up your business’ capital. An expense is<br />
only incurred for the equipment when it is needed for a<br />
particular job. <strong>The</strong> extra capital you save through renting<br />
equipment from <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> can be applied<br />
to the other demands within your business so you can<br />
grow profitably. Release your business from the costs<br />
associated with equipment ownership.<br />
Reduce Maintenance Costs<br />
Now you can reduce costly service shops,<br />
service tooling, spare parts and those<br />
cumbersome maintenance records on smaller<br />
equipment. We do it all for you. On larger equipment,<br />
we offer cast effective service packages, available at<br />
most branches.<br />
Eliminate Storage Costs<br />
No need to maintain a storage yard. Just give<br />
us a call for quick pick-up or simply drop off the<br />
equipment at the nearest <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> when<br />
you’ve finished using it. We’ll take care of the equipment<br />
storage.<br />
Expect Responsive Service<br />
Our team can k<strong>now</strong>ledgeably consult you on equipment<br />
and applications. We will work to become your trusted<br />
rental source and make your job easier. We are only a<br />
phone call away.<br />
Try It Before You Buy It<br />
You may be considering buying a certain model of<br />
equipment and would like to operate it on your job to<br />
make sure it suits you before making that potential<br />
purchase. What better way to thoroughly try out<br />
equipment than to rent a similar machine from the large<br />
selection of equipment at <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong>.<br />
Bottom Line<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> is fast, easy, cost-effective and there<br />
when you need us. Call 1-866-285-5550 to discuss your<br />
equipment needs with one of our <strong>Rental</strong> Specialists today.<br />
Right Tools.<br />
Right Place.<br />
Right Now.<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
5
Benefits of Renting<br />
F R O M<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> ®<br />
RENT. REDEEM. RELAX.<br />
Where our customers go to relax.<br />
Sun, sand and surf. <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> can help you<br />
get there.<br />
As sponsor of the AIR MILES ® Reward Program, we’re<br />
offering 1 AIR MILES reward miles for every $25 you<br />
spend on rentals. Whether you’re renting from our wide<br />
range of <strong>Cat</strong> equipment, or from our major brands<br />
of <strong>tools</strong> and equipment, your AIR MILES rewards can<br />
quickly add up to the vaction of your dreams. So go<br />
ahead and RENT, REDEEM and RELAX with <strong>The</strong> <strong>Cat</strong><br />
<strong>Rental</strong> <strong>Store</strong> today.<br />
For additional information call your local branch office or<br />
ask one of our <strong>Rental</strong> Specialists.<br />
benefits of renting from <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
6 1.866.285.5550
Operator Safety Training When and<br />
Where You Need It!<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> offers a full line of Safety Training<br />
Services to assist with the training of your staff and<br />
ensuring corporate compliance. With the constant safety<br />
regulation changes in construction, commercial and<br />
industrial settings, it is important for the contractor to<br />
stay ahead. At <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> we understand how<br />
important compliance, due diligence and safety training<br />
issues are to employers. Our extensive list of programs<br />
follow the guidelines provided by the Manufacturer,<br />
WH&S-AB, WCB-OHS -BC, and CSA Standards. If you<br />
have a need for a program not listed, contact us and we<br />
can review custom programs for your specific needs. <strong>The</strong><br />
benefit of having a properly trained, competent employee<br />
far outweighs the cost of a lost time or fatal injury.<br />
Training Services:<br />
• Aerial Work Platform Operator Certification<br />
• Oil sands Safety Association Aerial program<br />
(OSSA-AWP) Accredited AWP training for the oil<br />
sands projects.<br />
• Telescopic Handler Operator Certification<br />
• Skid Steer Loader Operator Certification<br />
• Forklift, Wheel Loader, Excavator, Fall Protection<br />
Other Programs:<br />
• Compact construction equipment<br />
familiarization<br />
• Safe use of attachments and work <strong>tools</strong> for<br />
equipment<br />
• Heating applications and heating equipment<br />
• Load securing of mobile equipment<br />
Temporary Branch Sites and<br />
Mobile Tool Cribs<br />
Comprehensive Supply Capabilities<br />
• Full Range of <strong>Rental</strong> Tools and Equipment<br />
• On Site Management of Toolcribs<br />
• Specialty Site Trailers Tailored for Your<br />
Requirements<br />
• Electronic Inventory/Billing Control On Site<br />
• Safety Training Provided to On Site Operators<br />
• Mechanical Support Services On Site<br />
• Extensive Planning Services Available<br />
• Certification/Repair of Clients’ Tools and<br />
Equipment<br />
• Plant Services Personnel Trained in WHMIS, TDG,<br />
Confined Space Entry, Forklift Operation, First Aid,<br />
and More.<br />
EQUIPMENT SAFETY TRAINING<br />
Employer Benefits:<br />
• Fewer accidents<br />
• Less damage to equipment, property<br />
and products<br />
• Skilled and confident operators<br />
• Met/exceed OH&S Code and<br />
Regulations<br />
• Due diligence for supervisors<br />
Employee Benefits:<br />
• New skills and k<strong>now</strong>ledge<br />
• Greater familiarity and comfort level<br />
with the equipment<br />
• Ability to operate equipment safely<br />
• Forum for specific application review<br />
Registration trainer@catrents.ca<br />
or contact your local branch. Use It Right. Use it Safe.<br />
MOBILE SITE SERVICES<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> is dedicated to providing specific<br />
equipment, <strong>tools</strong>, and services for routine and<br />
emergency maintenance:<br />
• <strong>The</strong>rmal Plants • Hydrostations<br />
• Pulp & Paper Mills • Oil & Gas Refineries<br />
• Chemical Plants • Mining<br />
Contact any of our locations for more information on<br />
how we can help you with all your mobile site needs.<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
7
SHUTDOWN/TURNAROUND INDUSTRIAL PROJECT SERVICES<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> has a complete support network for<br />
your next shutdown/project. We can deploy an experienced<br />
team of professionals with years of experience<br />
for any size project. Our philosophy is based on finding<br />
ways to reduce the overall cost of the shutdown/project;<br />
experience and tight management controls all build<br />
toward this common goal.<br />
benefits of renting from <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
Safety Certified<br />
• Accident Reduction Techniques<br />
• COR (Certificate of Recognition)<br />
• H2S Alive certified<br />
• CSTS certified<br />
• WHMIS certified<br />
• TDG certified<br />
• First Aid certified<br />
Process and Controls<br />
PLANNING<br />
Planning Impact<br />
• Field level risk assessments and site<br />
preparation<br />
• Safety awareness and training<br />
• Establish KPI’s (availability, pricing,<br />
equipment specifications)<br />
• Pre-shut down checklist<br />
• Budget goals and preliminary quotation<br />
Equipment Evaluation and Planning<br />
• Historical information to determine lists<br />
and equipment/tool reduction opportunities<br />
• Operational Training<br />
• Distribution of work team packages<br />
• Evaluate potential emergent work issues<br />
IMPLEMENTATION<br />
Direct Impact<br />
• Daily forecasting to scheduled budget<br />
• Daily management updates on inventory and<br />
access<br />
• Suspended or off-rent practices to reduce overall<br />
budget<br />
Equipment Evaluation and Planning<br />
• Tracking historical information to determine<br />
potential reduction opportunties<br />
• Mechanical servicing and fueling<br />
• Customer equipment management programs<br />
• Identify <strong>tools</strong>/equipment for emergent work<br />
FOLLOW-UP<br />
Reporting Impact<br />
• Equipment volume (units) relative to shutdown<br />
plan timing (days, project etc.)<br />
• Total inventory usage reports by w.o., dept. or<br />
contractor<br />
• Metered usage of motorized equipment vs. time<br />
rented<br />
• Safety performance reports<br />
Equipment Evaluation and Future Planning<br />
• Historical information to determine lists and<br />
equipment/tool reduction opportunities<br />
• Comparison of actual to planned expenditures<br />
8 1.866.285.5550
<strong>The</strong> Wirtanen Electric Divsion of <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> offers<br />
all types of instrument and electrical apparatus, both for<br />
rent and for sale. A <strong>Rental</strong> Specialist is available to help<br />
you rent or purchase the <strong>right</strong> equipment for the job.<br />
Services include:<br />
• Instrument Calibration services<br />
• Electrical <strong>Rental</strong> services<br />
• Standard temporary power<br />
• Transformers<br />
For detailed information please visit our website at<br />
www.catrents.ca or call the Wirtanen Electric Division<br />
order desk directly at 1.866.285.5550 ext. 26.<br />
INDUSTRY MANAGERS<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> has a complete support network for<br />
your next project.<br />
When you allow <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong>'s team of industry<br />
consultants to help with planning, implementing and<br />
follow-up on your projects it will save you time and<br />
money. <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> industry managers can<br />
provide you with training and technical support; giving<br />
you proactive solutions but remaining cost effective. Put<br />
our experience and expertise to work for you and ensure<br />
you have the <strong>right</strong> equipment for the job.<br />
• Aerial Work<br />
Platforms<br />
• Air Compression<br />
• <strong>Cat</strong>erpillar Products<br />
• Electrical<br />
• Industrial Projects<br />
• Power Generation<br />
• Instrumentation<br />
• Pumps<br />
• Temperature<br />
Control (Heat &<br />
Air Conditioning)<br />
• Trench Shoring<br />
WIRTANEN ELECTRIC DIVISION<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
9
NEW & USED EQUIPMENT SALES<br />
<strong>Rental</strong>s are not our only business. You love to rent from<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong>, <strong>now</strong> you can own those quality<br />
machines and <strong>tools</strong>. If you are in the market to purchase<br />
used equipment, <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> offers a full range<br />
of equipment and <strong>tools</strong> to meet all of your jobsite needs.<br />
Contact your local <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> for further details.<br />
You can also view an up to date Used Equipment List<br />
on-line at, www.catrents.ca.<br />
Go ahead and take advantage of the competitive prices<br />
on well maintained used equipment. Come see the<br />
selection today.<br />
benefits of renting from <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
10 1.866.285.5550
WHAT IS IT?<br />
<strong>Rental</strong> Equipment Coverage (REC) is the coverage we<br />
provide to our customers in order to reduce their risk.<br />
It limits your risk in relation to both destruction and<br />
damages of the equipment you rent from <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong><br />
<strong>Store</strong>.<br />
WHO NEEDS IT?<br />
• It must be used when account customers cannot<br />
provide proof of insurance coverage.<br />
• This program is mandatory for all non-account<br />
customers (Cash).<br />
• Account customers who don’t want to have to contact<br />
their insurance agent every time they want to add or<br />
take a piece of equipment from their policy.<br />
WHY DO I NEED REC?<br />
• Provides certainty of coverage.<br />
• Peace of mind.<br />
• Provides an option for account customers who are able<br />
to provide proof of insurance coverage.<br />
• Reduces the need to claim something on your own<br />
policy. Can reduce increases in premiums in the event<br />
of a claim.<br />
• Easier than contacting your insurance broker with<br />
equipment change notices, especially on short term<br />
rentals.<br />
• Recommended for the rental of pumps (reduced risk if<br />
an oversized object is inhaled).<br />
• Recommended when small equipment is used with<br />
larger mobile equipment (drive overs).<br />
• For cash customers we can offer a lower deposit<br />
requirement equal to the expected rental term when<br />
they take REC. As opposed to a one month deposit<br />
minimum we take today.<br />
RENTAL EQUIPMENT COVERAGE (REC)<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
11
aerial work platforms<br />
ARTICULATED BOOMS (DUAL FUEL OR DIESEL)<br />
Work Weight Capacity<br />
Size Height JIB (lbs) (lbs)<br />
34' articulated 4WD 41' YES 10500 500<br />
45' articulated 4WD 51' YES 14500 500<br />
60' articulated 4WD 66' N/A 22055 500/1000<br />
ARTICULATED BOOMS (ELECTRIC)<br />
Work Weight Capacity<br />
Size Height JIB (lbs) (lbs)<br />
30' articulated 2WD 36' YES 14500 500<br />
34' articulated 2WD 41' YES 11500 500<br />
45' articulated 2WD 51' YES 15100 500<br />
60' articulated 4WD 66' YES 17100 500<br />
aerial work platforms<br />
12 1.866.285.5550
MANLIFTS (ELECTRIC)<br />
Work Weight Capacity<br />
Size Height (lbs) (lbs)<br />
25' Single manlift 31' 817 300<br />
30' Single manlift 36' 867 300<br />
36' Single manlift 43' 1107 300<br />
MATERIAL LIFTS<br />
Weight Capacity<br />
Size (lbs) Fuel Type (lbs)<br />
18' Material lift 69 lbs. Air 250<br />
18' Material lift 307 lbs. Manual 650<br />
24' Material lift 374 lbs. Manual 650<br />
SCISSOR LIFTS (ELECTRIC)<br />
Work Weight Capacity<br />
Size Height (lbs) (lbs)<br />
19' scissor 2WD 25' 3314 500<br />
20' scissor 2WD 26' 3438 800<br />
26' scissor 2WD 32' 4646 850-1000<br />
32' scissor 2WD 38' 5564 700<br />
SCISSOR LIFTS RT (DUAL FUEL OR DIESEL)<br />
Work Weight Capacity<br />
Size Height (lbs) (lbs)<br />
26' scissor 4WD 32' 7600 1500<br />
32' scissor 4WD 38' 7520 1000<br />
32' scissor 4WD 38' 8520 1000<br />
41' scissor 4WD 47' 11740 1500<br />
50' scissor 4WD 56' 14500 2000<br />
Auto leveling outriggers available on RT models.<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
13
STRAIGHT MAST BOOMS (DUAL FUEL OR DIESEL)<br />
Work Weight Capacity<br />
Size Height JIB (lbs) (lbs)<br />
45' straight 4WD 51' YES 14790 500<br />
60' straight 4WD 66' N/A 26060 500<br />
60'A straight 4WD 66' N/A 26060 500/1000<br />
65' straight 4WD 71' YES 28400 500<br />
85' straight 4WD 91' YES 35860 500/1000*<br />
120' straight 4WD 126' N/A 44340 500/1000*<br />
125' straight 4WD 131' YES 44600 500<br />
150' straight 4WD 131' YES 44600 500<br />
* 1,000 lbs capacity only available on the JLG model<br />
aerial lifts<br />
14 1.866.285.5550
SUPER BOOMS (DUAL FUEL OR DIESEL)<br />
Work Weight Capacity<br />
Size Height JIB (lbs) (lbs)<br />
125' articulated 4WD 131' YES 44000 500/1000*<br />
135' articulated 4WD 141' YES 45500 500<br />
* 1,000 lbs capacity only available on the JLG model<br />
TOWABLE & TRAILER MOUNTED BOOMS<br />
Work Weight Capacity<br />
Size Height (lbs) (lbs)<br />
34' Trailer mount 40' 2950 500<br />
50' Trailer mount 56' 4850 500<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
15
air equipment / compressors<br />
AIR DRYERS/COOLERS<br />
Size Pressure Weight<br />
250 CFM 100/ 150 PSI 1000 lb.<br />
350 CFM 100/ 150 PSI 1200 lb.<br />
800 CFM 100/ 150 PSI 1500 lb.<br />
900 CFM 100/ 150 PSI 2200 lb.<br />
1300 CFM 100/ 150 PSI 1500 lb.<br />
1600 CFM 100/ 150 PSI 2000 lb.<br />
200 - 450 CFM 80/ 150 PSI Full Containment 1000 lb.<br />
PORTABLE DIESEL AIR COMPRESSORS<br />
Size Pressure Fuel cap. Weight Length / Width<br />
92 CFM 100 PSI 30 ltr/6.6 gal. 498 kg/1,098 lbs. 108" / 46"<br />
185 CFM 100 PSI 30 gal. 2,700 lbs. 147" / 75"<br />
210 CFM 100/150 PSI 35 gal. 2,950 lbs. 133" / 66"<br />
225 CFM 100/150 PSI 35 gal. 2,950 lbs. 147" / 75"<br />
375 CFM 100/150 PSI 50 gal. 3,500 lbs. 151" / 74"<br />
DIESEL AFTERCOOLED AND FILTERED AIR COMPRESSORS<br />
Size Pressure Fuel cap. Weight Length / Width<br />
750 CFM 100 PSI 120 gal. 10,050 lbs. 192" / 72"<br />
900 CFM 100 PSI 120 gal. 16,040 lbs. 191" / 87"<br />
900 CFM 350 PSI 190 gal. 7,500 lbs. 240" / 88"<br />
900/1150 CFM 500/350 PSI 190 gal. 16,500 lbs. 240" / 88"<br />
1600 CFM 100/150 PSI 190 gal. 16,350 lbs. 240" / 88"<br />
DIESEL AFTERCOOLED AND FILTERED AIR COMPRESSORS<br />
Size Pressure Fuel cap. Weight Length / Width<br />
190 CFM 80-125 PSI 21 gal. 2,100 lbs. 135" / 55"<br />
240 CFM 100-150 PSI 46 gal. 3,500 lbs. 172" / 67"<br />
350 CFM 150-200 PSI 46 gal. 4,200 lbs. 172" / 67"<br />
750 CFM 80-150 PSI 100 gal. 10,500 lbs. 191" / 87"<br />
900 CFM 80-150 PSI 100 gal. 10,600 lbs. 191" / 87"<br />
1000 CFM 225-365 PSI 210 gal. 14,500 lbs. 220" / 83"<br />
1600 CFM 80-150 PSI 215 gal. 17,320 lbs. 238" / 88"<br />
air equipment / compressors<br />
16 1.866.285.5550
ELECTRIC/GAS AIR COMPRESSORS<br />
Product Size Pressure Weight<br />
8 - 10 CFM 110 Volt. 100 PSI 60 - 175 lb.<br />
350 CFM 480 Volt. 100 PSI 3,000 lb.<br />
700 CFM 480 Volt. 100 PSI 6,000 lb.<br />
10 -14 CFM GAS 100 PSI 175 lb.<br />
22 CFM GAS 100 PSI 240 lb.<br />
380 - 900 CFM 480 Volt. 80 - 175 PSI 11,600 lb.<br />
428 - 785 CFM 480 Volt. 100 - 150 PSI 11,700 lb.* * 100% oil free<br />
WATER & OIL SEPARATORS<br />
Size CFM PSI<br />
3/8" line 50 100<br />
3/4" line 375 100<br />
2" line 1600 100<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
17
air <strong>tools</strong><br />
AIR GRINDERS<br />
Size Air Requirement RPM<br />
1/4" Right angle air die grinder 3-5 CFM @ 90 PSI 20,000<br />
1/4" Straight air die grinder 3-5 CFM @ 90 PSI 25,000<br />
4" Straight air grinder 28 CFM @ 90 PSI 9,500<br />
6" Straight air grinder 42 CFM @ 90 PSI 6,300<br />
5" Right angle air grinder 31 CFM @ 90 PSI 12,000<br />
7" Right angle air grinder 32 CFM @ 90 PSI 8,000<br />
7" Right angle water Shienco 32 CFM @ 90 PSI 8,000<br />
AIR HOSE<br />
Size Pressure Rating<br />
3/8" x 50' Air hose 200 PSI<br />
1/2" x 50' Air hose 250 PSI<br />
3/4" x 50' Air hose 400 PSI<br />
2" x 50' Air hose 400 PSI<br />
2" x 50' Air hose 1000 PSI<br />
3" x 25' Air hose 600 PSI<br />
3" x 50' Air hose 600 PSI<br />
Hose Restraints Safety cable Pressure<br />
Brand Size Length Rating<br />
Whipcheck 1/2" - 1 1/4" 20 1/4" 200 lbs.<br />
Whipcheck 1 1/2" - 3" 38 1/4" 200 lbs.<br />
Whiploc W-1600 1 1/2" - 3" 38 1/4" 7,000 lbs.<br />
Whiploc W-500LS 1/2" - 1/4" 38 1/4" 2,000 lbs.<br />
Various hose fittings are available upon request.<br />
BREAKERS<br />
Size Air Requirement Shank Weight (lbs.)<br />
15 lb. Class 38 CFM @ 90 PSI 7/8" 33<br />
30 lb. Class 48 CFM @ 90 PSI 1" 43<br />
60 lb. Class 65 CFM @ 90 PSI 1 1/8" 68<br />
90 lb. Class 80 CFM @ 90 PSI 1 1/8" 93<br />
A full line of tooling is available.<br />
Includes: moil points, chisels, clay spades, asphalt cutters, frost wedges and more<br />
DRILLS<br />
Size Air Requirement RPM Weight<br />
3/8" Right angle air drill 26 CFM @ 90 PSI 900<br />
1/2" Right angle air drill 26 CFM @ 90 PSI 600<br />
1/2" Air drill 19 CFM @ 90 PSI 1250<br />
30 lb. Rock drill 90 CFM @ 90 PSI 2300 38 lbs.<br />
60 lb. Rock drill 120 CFM @ 90 PSI 2100 61 lbs.<br />
A full line of tooling is available.<br />
Includes: drill steels, bits, etc.<br />
air <strong>tools</strong><br />
18 1.866.285.5550
FANS/BLOWERS<br />
Description Air Requirement Output<br />
3" Horn type 62 CFM @ 80 PSI 1462 CFM<br />
6" Horn type 124 CFM @ 80 PSI 3347 CFM<br />
8" Horn type 193 CFM @ 80 PSI 4929 CFM<br />
10" Horn type 274 CFM @ 80 PSI 7304 CFM<br />
20" Fan type 210 CFM @ 80 PSI 11000 CFM<br />
IMPACT WRENCHES/RATCHETS<br />
Description Air Requirement Maximum<br />
3/8" Ratchet 4 CFM / 90 PSI 50 ft.-lb.<br />
1/2" Ratchet 4 CFM / 90 PSI 50 ft.-lb.<br />
3/8" Imp. Wrench 15 CFM / 90 PSI 105 ft.-lb.<br />
1/2" Imp. Wrench 26 CFM / 90 PSI 400 ft.-lb.<br />
3/4" Imp. Wrench 60 CFM / 90 PSI 1450 ft.-lb.<br />
1" Imp. Wrench 58 CFM / 90 PSI 2000 ft.-lb.<br />
1 1/2" Imp. Wrench 70 CFM / 90 PSI 3000 ft.-lb.<br />
2 1/2" Imp. Wrench 130 CFM / 90 PSI 20,000 ft.-lb.<br />
LONG REACH SCALER<br />
B.P.M. C.F.M. Weight Length<br />
2500 6/8 @ 90 PSI 16 lbs. 5 feet<br />
LUBRICATORS / MANIFOLDS / TANKS<br />
Description<br />
Air manifold 2" - 3" inlet x 6" outlet<br />
Receivertanks 10 - 500 gallon<br />
Description Size Oil capacity Max. pressure Air flow @ 70 PSI<br />
Line oiler 3/4" 11 fl.oz. 300 PSI 70 CFM<br />
Line oiler 1" 16 fl.oz. 250 PSI 100 CFM<br />
Receiver tanks and manifolds can be sized to meet site specifications.<br />
NAILERS<br />
Nail Nail Air<br />
Description capacity length requirement Gauge<br />
Roofing nailer 120 7/8" - 1 3/4" 6-10 CFM @ 100 PSI N/A<br />
Framing nailer 74-84 2" - 3 1/2" 8-10 CFM @ 100 PSI N/A<br />
Finishing nailer 150 3/4" - 2 1/2" 6 CFM @ 100 PSI 16<br />
Hardwood floor nailer<br />
A full line of air hose and nails are available upon request.<br />
RIVET BUSTER<br />
Model Air Requirement Weight lbs. BPM Bore<br />
Air rivet buster<br />
A full line of tooling is available.<br />
46 CFM @ 90 PSI 35 lbs. 960 1 3/16"<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
19
SANDBLAST UNITS<br />
Size Air Requirement" Shipping Weight"<br />
100 lb 25 CFM @ 100 PSI 110 lb<br />
350 lb 185 - 375 CFM @ 100 PSI 240 lb<br />
650 lb 185 - 375 CFM @ 100 PSI 340 lb<br />
48”x 36” Cabinet 15 CFM @ 90 PSI 750 lb<br />
A complete selection of accessories is available, including air and electric driven breathing air pumps.<br />
Includes: hoses, filters, purifiers, hoods, nozzles, deadman switch, etc.<br />
SAWS<br />
Blade<br />
Description Air stroke Requirement Pipes<br />
Hacksaw Portable (FEIN) 2 3/8" 51 CFM @ 86 PSI up to 12 2/3"<br />
Hacksaw Pipe Clamp 1" - 6"<br />
Hacksaw Pipe Clamp 6" - 12"<br />
A full line of air hose and blades are available upon request.<br />
STAPLERS<br />
Staple Staple<br />
Description Air re<strong>place</strong>ment Weight capacity length Gauge Crown<br />
Air stapler 6 CFM<br />
@ 90 PSI<br />
2.8 lbs 100 3/4"-1 1/2" 18 N/A<br />
Air stapler 6 CFM<br />
@ 90 PSI<br />
2.8 lbs 120 1/2"-1 1/4" 18 3/16"<br />
Air stapler 6-8 CFM<br />
@ 90 PSI<br />
4.6 lbs 150 1/2" - 2" 16 7/16"<br />
A full line of air hose and staples are available upon request.<br />
TORQUE MULTIPLIERS<br />
Ratio<br />
4:1 1000 ft. lbs. to 4000 ft. lbs.<br />
23:1 3200 ft. lbs.<br />
air <strong>tools</strong><br />
20 1.866.285.5550
TUGGERS<br />
Air Req. Drum Cap. Anchor Hole<br />
Size CFM / PSI Cable size/length Diam. (inches)<br />
1000 lb 42/90 1/4" x 245' 3/8"<br />
5/16" x 140'<br />
2000 lb short drum 100/90 5/16" x 375' 9/16"<br />
3/8" x 226'<br />
2000 lb long drum 100/90 5/16" x 946' 9/16"<br />
3/8" x 619'<br />
7/16" x 465'<br />
3000 lb short drum 290/90 3/8" x 686' 11/16"<br />
7/16" x 476'<br />
1/2" x 379'<br />
3000 lb long drum 290/90 3/8" x 1445' 11/16"<br />
7/16" x 1012'<br />
1/2" x 813'<br />
4000 lb short drum 175/90 3/8" x 686' 11/16"<br />
7/16" x 476'<br />
1/2" x 379'<br />
4000 lb long drum 175/90 3/8" x 1445' 11/16"<br />
7/16" x 1012'<br />
1/2" x 813'<br />
5000 lb short drum 420/90 7/16" x 851' 11/16"<br />
1/2" x 713'<br />
5/8" x 457'<br />
5000 lb long drum 420/90 7/16" x 1741' 11/16"<br />
1/2" x 1427'<br />
5/8" x 913'<br />
10,000 lb short drum 700/90 5/8" x 777' 3/4"<br />
3/4" x 581'<br />
10,000 lb long drum 700/90 5/8" x 1802' 3/4"<br />
3/4" x 1355'<br />
16,000 lb short drum 750/90 3/4" x 1640' 1"<br />
7/8" x 1059'<br />
1" x 786'<br />
16,000 lb long drum 750/90 3/4" x 2486' 1"<br />
A full line of air compressors and hose available upon request.<br />
Specifications may vary with make and model.<br />
*Tugger Cable sold separately.<br />
7/8" x 1608'<br />
1" x 1196'<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
21
all-terrain vehicles<br />
ALL-TERRAIN<br />
• Quads<br />
• Mules<br />
• Argos<br />
ALL-TERRAIN ACCESSORIES<br />
• Aluminum ramps 9 x 12<br />
• Quad box<br />
• Carts<br />
• Bush Movers<br />
• Seeder<br />
SNOWMOBILES<br />
• Wide Track<br />
carpentry<br />
DRILLS<br />
Type Voltage Size<br />
<strong>right</strong> angle 110 VT. 3/8"<br />
<strong>right</strong> angle 110 VT. 1/2"<br />
<strong>right</strong> angle 110 VT. 5/8"<br />
<strong>right</strong> angle 110 VT. 3/4"<br />
Coring 110 VT. 1/2" - 14"<br />
Coring drill bits available to rent and purchase.<br />
Magnetic Base 110 VT. 1/2"<br />
Magnetic Base 110 VT. 3/4"<br />
Magnetic Base 110 VT. 1 1/4"<br />
Cordless 110 VT. 3/8"<br />
Cordless 110 VT. 1/2"<br />
Screwgun 110 VT.<br />
EXTENSION CORDS<br />
Length Type<br />
50' 12/3 U ground standard<br />
100' 12/3 U ground standard<br />
50' 10/3 weather proof box/GFI<br />
100' 10/3 weather proof box/GFI<br />
50' explosion proof<br />
100' explosion proof<br />
We also can supply high voltage power cable.<br />
all-terrain vehicles / carpentry<br />
22 1.866.285.5550
GRINDERS<br />
Type Size RPM<br />
<strong>right</strong> angle 110 VT. 4 1/2" - 5" 10,000<br />
<strong>right</strong> angle 110 VT. 7" 8,000<br />
<strong>right</strong> angle 110 VT. 9" 6,000<br />
straight 6" 5,500<br />
Die 2" 18 -30,000<br />
Bench 6" - 10" 1,700 - 3,500<br />
ROUTERS<br />
Type RPM<br />
1 1/2 H.P. 23,000<br />
3 1/4 H.P. 22,000<br />
3 1/4 H.P. Plunge Type 22,000<br />
SANDERS<br />
Type Size Info<br />
Floor Edger 7"<br />
Floor Drum 8"<br />
Belt 3" x 21"<br />
Belt 4" x 24"<br />
Orbital<br />
Sandpaper is available to purchase.<br />
SAWS<br />
Type Description Size Info<br />
Band Saw 110 VT. 53 3/4" Portable<br />
Band Saw horizontal<br />
Band Saw vertical<br />
Chop Saw 110 VT. 14" Table Mount<br />
Chop Saw 220 VT. 20" Table Mount<br />
Circular 110 VT. 8 1/4" Portable<br />
Cut off 110 VT. 12" Compound<br />
Mitre 110 VT. 10" - 12" 3 speed<br />
Reciprocating 110 VT. 3" - 16" 11 amps.<br />
Jig 110 VT. 3/8" - 1" 5.5 amps.<br />
Radial Arm 110 VT. 10"<br />
Table<br />
Blades are available to purchase.<br />
110 VT. 10"<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
23
SHEARS/NIBBLERS<br />
Type Voltage Size<br />
Shear 110 VT. 12 gauge<br />
Shear 110 VT. 14 gauge<br />
Shear 110 VT. 16 gauge<br />
Nibbler 110 VT. 8 gauge<br />
Nibbler 110 VT. 10 gauge<br />
Nibbler 110 VT. 16 gauge<br />
WRENCH IMPACT<br />
Size Voltage Torque<br />
1/2" dr. 110 VT. 217 ft-lbs.<br />
3/4" dr. 110 VT. 433 ft-lbs.<br />
1" dr. 110 VT. 722 ft-lbs.<br />
cleaning equipment<br />
VACUUM CLEANERS<br />
Size Size Info<br />
Industrial wet/ dry 20 litre 110 VT.<br />
Industrial wet/ dry 60 litre 110 VT.<br />
Hepa Vac 11 gallons 110 VT.<br />
Industrial drum unit 45 gallons AIR<br />
A complete assortment of attachments are available<br />
e.g. hoses/ wands/ floor attachments.<br />
CARPET DRYING<br />
Carpet Drying 120 3000<br />
12” Manhole Gas/Electric with ducting<br />
POWER WASHERS<br />
Cold Water Wash<br />
PSI Fuel<br />
1000 Electric/Kero Cold<br />
1000 Electric Hot<br />
1500 Gas Cold<br />
2000 Gas Cold<br />
2500 Gas Cold<br />
3000 Gas Cold<br />
3000 Gas/Kero Hot<br />
4000 Gas Cold<br />
Ask about our complete line of accessories and attachments.<br />
carpentry / cleaning equipment / compaction<br />
24 1.866.285.5550
compaction<br />
BACK FILL TAMPER<br />
B.P.M. C.F.M. Weight Length Air Inlet<br />
670 38 - 42 @ 90 PSI 37 lbs. 51 feet 1/2 female<br />
DIESEL PLATE TAMPERS<br />
Plate Size Compaction Centrifugal<br />
Make Model Weight (W x L) Depth Force<br />
Dynapac LG200 478 lbs 20" x 28" (up to) 25" 8,100 lbs<br />
Dynapac LG300 584 lbs 20" x 44" (up to) 30" 9,000 lbs<br />
Wacker DPU 4045H 725 lbs 24" x 35.5" (up to) 28" 9,000 lbs<br />
Wacker DPU 5045H 904 lbs 24" x 35.5" (up to) 34" 11,240 lbs<br />
Wacker DPU 6055 1041 lbs 28" x 35.5" (up to) 40" 13,500 lbs<br />
Dynapac LG500 1047 lbs 28" x 35" (up to) 30" 13,500 lbs<br />
Wacker DPU 100-70 1566 lbs 38" x 42.3" (up to) 40" 22,500 lbs<br />
Dynapac LH700 1683 lbs 26" x 42" (up to) 30" 21,400 lbs<br />
Dynapac LH800 (remote) 1720 lbs 26" x 46" (up to) 30" 21,400 lbs<br />
Application: For compaction of sand and gravel, crushed aggregate as well as mixed soils with some cohesive content.<br />
GAS PLATE TAMPERS<br />
Plate Size Compaction Centrifugal<br />
Make Model Weight (W x L) Depth Force<br />
Dynapac LF 15A 172 lbs 18.0" x 41.0" 14" 2250 lbs+<br />
Dynapac LF 82 172 lbs 16.0" x 35.0" 12" 4050 lbs+<br />
Wacker VPG 165A 160 lbs 18.0" x 24.5" 14" 3375 lbs<br />
Wacker WP 1550 A/ W* 194 lbs 19.5" x 23.0" 12" 3375 lbs<br />
Dynapac LF 3820 203 lbs 20.0" x 40.0" 14" 3825 lbs+<br />
Wacker VPA 1750 245 lbs 19.5" x 25.0" 14" 3900 lbs<br />
Wacker BPS 2550A 274 lbs 19.5" x 25.5" 16" 5650 lbs<br />
Wacker BPU 3345A 636 lbs 24.0" x 35.5" 28" 7550 lbs<br />
*W indicates water tank for asphalt applications.<br />
*+ indicates suitable for asphalt<br />
Application: Compaction of granular materials, mixed materials and asphalt when equipped with tank.<br />
JUMPING JACKS/RAMMERS<br />
Shoe Size Compaction Force/<br />
Model Weight (WxL) Depth Blow Fuel<br />
BS500*** 115 lbs 11" x 13" 20" 2695 lbs Mixed<br />
BS600 137 lbs 11" x 13" 23" 3025 lbs Mixed<br />
BS700 159 lbs 13" x 13" 24" 3375 lbs Mixed<br />
ES52Y (Elec.) 123 lbs 10" x 13" 18" 2590 lbs 115V/15 Amps<br />
LT6000 150 lbs 11" x 13" 23" 3330 lbs Gas (4-stoke)<br />
LT5000 139 lbs 9" x 13" 20" 2925 lbs F/Blow Gas<br />
*Optional: 6" wide shoes for BS500.<br />
Application: Confined area compaction of granular, mixed, and cohesive soils.<br />
(4-stroke)<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
25
COMPACTION<br />
Model HP Weight Width Type<br />
CB22 33 5,512 lbs. 39" Smooth Double Drum<br />
CS323C 83 9,680 lbs. 50" Smooth Soil<br />
CS44 100 15,961 lbs. 66" Smooth Soil<br />
CS56 156 25,164 lbs. 84" Smooth Soil<br />
TRENCHING ROLLERS<br />
Drum Compaction Centrifugal<br />
Make Weight Width Length Depth Force<br />
Wacker RT 820 Padfoot 3020 lbs 32" 80" 28" 14,000 lbs<br />
Dynapac LP8500 3693 lbs 33" 74" N/A 16,500 lbs<br />
Application: For compaction of cohesive soils in sub-bases for foundations, roads and parking lots.<br />
WALK-BEHIND ROLLERS<br />
Drum<br />
Make Weight Width<br />
BW75 smooth 926 kg 750 mm<br />
BW90 smooth 1520 kg 900 mm<br />
26 1.866.285.5550
concrete equipment<br />
BREAKERS<br />
Model Size Blow/min Power Watts<br />
Kango 900 22 lbs. 2000 115 Volt 1050<br />
Kango 950 25 lbs. 2200 115 Volt 1050<br />
HILTI TE 805 21.3 lbs. 2000 115 Volt 1350<br />
HILTI TE 905 24.9 lbs. 2200 115 Volt 1600<br />
Kango 2500 71.5 lbs. 1400 115 Volt 2200<br />
Bosch 11304 66.5 lbs. 1340 115 Volt n/a<br />
A full line of tooling is available.<br />
BUCKETS<br />
Size<br />
1/2 yd.<br />
3/4 yd.<br />
1 yd.<br />
1 1/2 yd.<br />
2 yd.<br />
Please advise as to your specifications upon ordering. Side dump, bottom dump, aluminum and steel buckets available.<br />
See Powertech buckets under Loaders and Excavators.<br />
BUGGIES<br />
Model Capacity Tires HP Operating Weight<br />
Wacker WB 16AF 16 cu.ft. Foam-filled 13 lbs. 1180 lbs. (Bucket empty)<br />
DRILLS<br />
Drill Bit Size Weight<br />
Model Capacity Power Blows/Min Drill/Chip (lbs.)<br />
HILTI TE 5 / TE 7 3/16" to 3/4" 115 Volt. 4,000 Drill Only 6.6<br />
HILTI TE 25 / TE 40 3/16" to 1" 115 Volt. 3,720 Drill Only 10.8<br />
HILTI TE 55 / TE 56 1/2" to 3" 115 Volt. 2,630 Drill/Chip 13.0<br />
HILTI TE 76 / TE 70 1/2" to 6" 115 Volt. 2,770 Drill/Chip 15.4<br />
A full range of carbide and core-bits available.<br />
GRINDERS<br />
Type<br />
Ceiling 110 VT. 5" Single Head<br />
Floor 110 VT. Dual 10" Heads<br />
Floor Gasoline Dual 10" Heads<br />
CUTOFF SAWS<br />
Type Engine Bar<br />
Cutoff Makita Quick Cut Electric 12"<br />
STIHL TS400 14"<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
27
DIAMOND BLADES<br />
Size Type<br />
6" Wet Tile<br />
10" Wet Tile, Unistone<br />
12" Dry Concrete<br />
12" Dry Grn/Asphalt<br />
12" Wet Concrete<br />
14" Wet Cured Concrete<br />
14" Dry Cured Concrete<br />
14" Wet Grn/Asphalt<br />
14" Wet Block, Tile, Stone<br />
18" Wet Cured Concrete<br />
18" Wet Grn/Asphalt<br />
detection equipment<br />
Type Type<br />
Metal Detectors Pin Finder – Magna Wand<br />
Pipe and Cable Holiday Pipe<br />
Vacuum Leak Gas detectors – Carbon Monoxide<br />
Digital Multimeter – volts, amp, continuity<br />
Also ask about our full line of instrumentation from our Wirtanen Electric Division.<br />
concrete equipment / detection equipment / heaters<br />
28 1.866.285.5550
environmental management<br />
DOT APPROVED FUEL TANKS<br />
2,500 Litre<br />
4,500 Litre<br />
15,000 Litre<br />
50,000 Litre<br />
2,500 Litre (Dot & Transport Approved)<br />
GARBAGE BINS<br />
Forklift Dump bins<br />
GARBAGE CHUTES<br />
SPILLGUARD BERMS<br />
Various Sizes and Products<br />
TOILETS AND SINKS<br />
Portable Site Toilets<br />
Portable Sinks & Wash Basins<br />
Full on site servicing available in some locations.<br />
excavators<br />
Weight Buckets<br />
Model HP (lbs) Dig Depth Canopy/Cab Digging Clean up<br />
301.8D 18 3,935 6.8' Cab 9" & 16" 32"<br />
303.5D CR 30 8,160 9.5' Cab 12" to 24" 36" to 42"<br />
305.5D CR 47 12,048 11.3' Cab 16" to 36" 40" to 42"<br />
308D CR 55 17,306 13.4' Cab/Air 24" 42"<br />
314D LCR 90 30,865 17.1' Cab/Air 30" 54" & 60"<br />
319D LN 125 43,872 22.7' Cab 36" 66"<br />
Excavators are equipped with auxiliary hydraulics.<br />
Compactors, Demolition Hammers and Thumb attachments are available.<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
29
generators & lights<br />
PORTABLE GENERATORS<br />
Size Voltage Full Info<br />
1.5 - 2.8 kW 120/ 240 VT. 1 pH Gas<br />
3 - 4.5 kW 120/ 240 VT. 1 pH Gas<br />
5 - 6.5 kW 120/ 240 VT. 1 pH Gas<br />
14 kW 240/ 480 VT. 3 pH DSL Silenced/ Trailer<br />
15 kW 240/ 480 VT. 3 pH DSL Skid<br />
20 - 25 kW 240/ 480 VT. 3 pH DSL Silenced/ Trailer<br />
30 kW 240/ 480 VT. 3 pH DSL Skid<br />
25 - 30 kW 240/ 480 VT. 3 pH DSL Silenced/ Trailer<br />
35 kW 240/ 480 VT. 3 pH DSL Skid<br />
40 kW 240/ 480 VT. 3 pH DSL Skid<br />
35 - 40 kW 240/ 480 VT. 3 pH DSL Silenced/ Trailer<br />
45 - 50 kW 240/ 480 VT. 3 pH DSL Silenced/ Trailer<br />
TWIN 60 kW 240/ 480 VT. 3 pH DSL Skid<br />
70 kW 240/ 480 VT. 3 pH DSL Skid<br />
70 kW 240/ 480 VT. 3 pH DSL Silenced/ Trailer<br />
80 kW 240/ 480 VT. 3 pH DSL Skid<br />
100 kW 240/ 480 VT. 3 pH DSL Skid<br />
TWIN 100 kW 240/ 480 VT. 3 pH DSL Skid<br />
125 kW 240/ 480 VT. 3 pH DSL Skid<br />
125 kW 240/ 480 VT. 3 pH DSL Silenced/ Trailer<br />
150 kW 240/ 480 VT. 3 pH DSL Skid<br />
200 kW 240/ 480 VT. 3 pH DSL Skid<br />
250 kW 240/ 480 VT. 3 pH DSL Skid<br />
350 kW 208/480/600 VT. 3 pH DSL Silenced<br />
600 kW 480/600 VT. 3 pH DSL Silenced<br />
800 kW 480/600 VT. 3 pH DSL Silenced<br />
900 kW 480/600 VT. 3 pH DSL Silenced<br />
1250 kW 480/600 VT. 3 pH DSL Silenced<br />
1750 kW 480/600 VT. 3 pH DSL Silenced<br />
2000 kW 480/600 VT. 3 pH DSL Silenced<br />
LIGHTS<br />
Type Size Info<br />
Flood Light Metal Halide 400 Watt exp. proof class I div II<br />
Flood Light Metal Halide 1000 Watt c/w cart<br />
Flood Light Quartz 500 - 1500 Watt c/w Adt/ stano<br />
Light Tower M.H. 4 x1000 Watt 6 - 8 K.W.<br />
Light Tower (Mast Only) 4 x1000 Watt (For All Oilfield Skids)<br />
Light Tower Metal Halide 4 x1000 Watt 15 - 20 K.W.<br />
Light Tower Metal Halide 4 x1000 Watt 30 K.W.<br />
Stringlight 100 Watt 50'<br />
Trouble Light 100 Watt 50'<br />
Trouble Light 150 Watt 50' exp. proof class I div. II<br />
Wobble Light 400 Watt<br />
generators & lights /<br />
30 1.866.285.5550
instrumentation<br />
RECORDING INSTRUMENTS<br />
DIGITAL PRESSURE RECORDER<br />
Crystal N-Vision handheld base unit<br />
• re<strong>place</strong>s a field deadweight tester AND a chart recorder<br />
• comparative, real-time graphing<br />
• records 500,000 data points at up to 10 readings per second<br />
• ATEX/IECEx intrinsically safe IP67<br />
• high reading accuracy<br />
• modules interchangeable in the field<br />
Modules available-3,000 PSI/10,000 PSI/Current, Voltage & Switch Test/Temperature<br />
BARTON CIRCULAR CHART RECORDERS<br />
Barton 242E Temperature Pressure Circular Chart Recorders<br />
24 hour/7 day/1 hour, Hand-wound or Battery Clock<br />
Chart #GC-71169<br />
Pressure Scale: 0-50/0-100/0-200/0-300/0-500 PSI Temperature Scale: 0-150 °F<br />
Chart #GC-71170<br />
Pressure Scale: 0-1000/0-2000/0-3000/0-5000/0-10000 PSI Temperature Scale: 0-150 °F<br />
Chart #6C-71171<br />
Pressure Scale: 0-7000/0-14000/0-21000/0-35000 KPA Temperature Scale: -30 to 70 °C<br />
HIOKI RECORDERS<br />
Hioki 8810 Four Channel Recorder with 8 K Memory per channel<br />
Chart P/N # 9221<br />
Hioki 8811 Three Channel Recorder with 8K Memory per channel and 8 Logic channels<br />
Chart P/N # 9221<br />
IMPACT-O-GRAPH IMPACT RECORDERS<br />
Impact-o-graph M3, 10G XYZ Impact Recorder<br />
Chart # P-34<br />
Impact-o-graph M4, 6G XYZ Impact Recorder<br />
Chart # P-34<br />
YEW (YOKOGAWA) RECORDERS<br />
Yew 436-004 μR 1000 Strip Chart Recorder, 4 Channel Chart # B9565AW<br />
Yew DX104-1 Paperless Recorder, 4 Channel c/w Software and 10BaseT Ethernet connection<br />
Yew DX106 Paperless Recorder, 6 Channel c/w Software and 10BaseT Ethernet connection<br />
Yew DX112 Paperless Recorder, 12 Channel c/w Software and 10BaseT Ethernet connection<br />
Yew μR 10000 Paper Recorder, 4 Channel Chart # B9565AW<br />
Yew μR 20000 Paper Recorder, 24 Channel Chart # B9541AR<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
31
TEMPERATURE & HUMIDITY INSTRUMENTS<br />
CALIBRATORS<br />
Fluke Model 724 Temperature Calibrator<br />
DEW POINT TESTER<br />
GE Panametrics PM880 Dew Point Tester -110 to 20°C<br />
DRY BLOCK CALIBRATORS<br />
Hart Scientific 9141 Dry Block Calibrator<br />
High-Temperature Field Dry Block Calibrator, 50 to 650 °C<br />
Multi-Hole Insert- ½, 3/8, ¼, 3/16, 1/8, 1/16<br />
Techne Model DB35-L Dry Block Calibrator<br />
Temperature range -20°C to + 90°C, Setting range -40°C to +90°C<br />
Techne Model DB700A Dry Block Calibrator<br />
Ambient to 700°C. (1292°F) c/w two inserts<br />
AIR QUALITY<br />
Fluke 975 Air Quality Meter,<br />
Measures 0 2, CO, CO 2, Dew Point, Relative Humidity,<br />
Air Velocity and Air Volume c/w software and communications cable<br />
Fluke 983 Particle Counter<br />
INFRARED THERMO CAMERAS<br />
Fluke Ti20 <strong>The</strong>rmal Imager<br />
Range -10 to 350°C, 128 x 96 detector array, 50 memory locations c/w Inside IR software and communication cable<br />
instrumentation<br />
32 1.866.285.5550
GENERAL TESTING INSTRUMENTS<br />
COMBUSTION ANALYZERS<br />
Testo 330-2LL<br />
5 Gas Analyzer<br />
DYNAMOMETERS<br />
Measurement Systems Model MSI-7200 DYNA-LINK Tension Load Sensor<br />
Digital with wire remote display<br />
(25' of cable), Peak Hold 0-10,000 lbs.<br />
GAS ANALYZERS<br />
Drager X-am 7000<br />
5 Gas Analyzer<br />
Drager CMS Chipset Reader<br />
TUGGER FORCE GAUGE<br />
Greenlee 967<br />
FLOW MEASUREMENTS: AIR<br />
Alnor Model APM153 Balometer c/w 2' x 2', 2' x 4' and 1' x 4' hoods<br />
Alnor Model 6000AP Velometer<br />
Flow Velocities of Air & Measures Static<br />
Pressure Range 0/1250/2500/5000/10,000 FPM<br />
Alnor 6050BP-36 Pitot Tube Extension 36" (for Alnor 6000AP Velometer)<br />
Extech Model 407123 Hot Wire <strong>The</strong>rmo<br />
Anemometer 0.1 to 20.0 m/s, 32 to 122° F (0-50° C)<br />
Alnor EBT-721-A1 Balometer<br />
LASER ALIGNMENT SYSTEM<br />
Fixtur LASER XA - to align motor shafts<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
33
FLOW METERS ULTRASONIC<br />
GE Panametrics PT878 Time Transit Ultrasonic Flow Meter<br />
Standard Transducer for 2" to 96" pipe<br />
GE Panametrics A5100 Ultrasonic Transducer<br />
Small Transducers for ½" to 2" pipe<br />
Greyline Model PDFM-IV Portable Doppler Flow Meter<br />
GAUSSMETERS<br />
Lakeshore Model 410 Gauss Meter<br />
Extech 480826<br />
EMF Meter-Tri Axial<br />
LIGHT MEASURING EQUIPMENT<br />
Greenlee Model 93-172 Digital Light Meter<br />
UEI DLH2<br />
SOUND MEASURING EQUIPMENT<br />
Bruel & Kjaer Model 2230 Precision Integrating Sound Level Meter<br />
Extech Model 407764 Sound Level Meter c/w recorder output cable<br />
Reed C-322 Sound Level Meter<br />
TACHOMETERS & STROBOSCOPES<br />
SKF Model TM0T1 Optical Tachometer<br />
ULTRASONIC THICKNESS METERS<br />
NDT International Model NDT-710 Ultrasonic Thickness Gauge<br />
Nortec Model NDT 133 Ultrasonic Thickness Meter<br />
VIBRATION/BALANCING EQUIPMENT<br />
Commtest VB7 Vibration Analyzer Balancer<br />
WIRE MARKER<br />
Brady Model TLS 2200 Wire Marker<br />
instrumentation<br />
34 1.866.285.5550
ladders<br />
Type Length<br />
Extension Aluminum 20' - 60'<br />
Extension Fiberglass 20' - 40'<br />
Orchard 8' - 14'<br />
Step Aluminum 4' - 16'<br />
Step Fiberglass 4' - 16'<br />
Rope 10' - 30'<br />
landscaping<br />
CHAINSAWS<br />
Type Engine Bar<br />
Electric 110 Volt 1.7 Kw. 16"<br />
Gas 44 cc. 16"<br />
Gas 62 cc. 16"<br />
LAWN & GARDEN<br />
Item Item<br />
• Post Puller • Post Pounder<br />
• Post Hole Auger • Brush Cutter<br />
• Brush Chipper • Sweeper<br />
• Power Rake • Hedge Trimmer<br />
• Lawn Vacuum • Sod Cutter<br />
• Mowers • Edgers<br />
• Rototillers • Aerator<br />
Only available at limited locations.<br />
TRENCHERS<br />
Model Size<br />
Ditch Witch 1820<br />
Ditch Witch 1230<br />
Trenching attachments are available for our <strong>Cat</strong> Skidsteer units.<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
35
loaders<br />
BACKHOE LOADERS<br />
Weight Buckets<br />
Model HP (lbs) Dig Depth Digging Clean up<br />
420E IT 93 21,200 17.1' 24" 42"<br />
430E IT 102 21,300 19.6' 24" 42"<br />
Backhoes are equipped with front and rear auxiliary hydraulics.<br />
Compactors, Demolition Hammers, Forks, Frost Buckets, and many other attachments are available.<br />
SKID STEER LOADERS<br />
Weight Capacity<br />
Model HP (lbs.) (lbs.) Width<br />
226B3 57 5834 1500 60"<br />
*246C 73 7480 2150 72"<br />
*262C 82 7968 2700 72"<br />
279C 82 7968 3200 78"<br />
Skid steers are equipped with Rops/Cab and auxiliary hydraulics.<br />
Augers, Sweepers, Forks, Grapples, Trenchers, Cold Planers, Brush cutters, Brooms, Angle Blades, Stump Grinders, Landscape Rakes, Tree<br />
Spades, and a wide variety of buckets are available.<br />
* Loegering Track System available for 246C/262C models.<br />
WHEEL LOADERS<br />
Weight<br />
Model HP (lbs) Bucket<br />
924H 128 25,644 2.2 cyd<br />
Loaders are equipped with Quick Couplers and auxiliary hydraulics.<br />
Forks, Pipe and Pole Grapples, Material Handling Arms, Truss Booms and many other attachments are available.<br />
loaders / material handling<br />
36 1.866.285.5550
material handling<br />
BEAM CLAMPS<br />
Size Capacity<br />
3" - 6" 1 - 2 ton<br />
3" - 12" 3 - 5 ton<br />
3" - 7" 10 ton<br />
BEAM TROLLEYS<br />
Size Capacity<br />
3 3/4" - 7" 1 - 2 ton<br />
4" - 6" 3 ton<br />
5" - 7" 5 ton<br />
5" - 10" 10 ton<br />
CHAIN HOISTS<br />
Size Lift Type Weight<br />
1/2 ton 8' manual 28 lbs.<br />
1/2 ton 30' manual 39 lbs.<br />
1 ton 8' manual 35 lbs.<br />
1 ton 30' manual 46 lbs.<br />
1 1/2 ton 8' manual 46 lbs.<br />
1 1/2 ton 30' manual 57 lbs.<br />
2 ton 8' manual 55 lbs.<br />
2 ton 30' manual 66 lbs.<br />
3 ton 8' manual 72 lbs.<br />
3 ton 30' manual 83 lbs.<br />
5 ton 8' manual 92 lbs.<br />
5 ton 30' manual 103 lbs.<br />
10 ton 8' manual 204 lbs.<br />
10 ton 30' manual 215 lbs.<br />
25 ton 60' manual 1300 lbs.<br />
25 ton 25' manual 1200 lbs.<br />
Note: Additional chain can be installed to meet you requirements<br />
2 ton 50' air 60 CFM.<br />
3 ton 80' air 74 CFM.<br />
1/2 ton 8' electric 110 VT.<br />
1/2 ton 30' electric 110 VT.<br />
1 ton 8' electric 110 VT.<br />
1 ton 30' electric 110 VT.<br />
3 ton 8' electric 220/440/575 VT.<br />
3 ton 30' electric 220/440/575 VT.<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
37
COMEALONGS<br />
Size Lift Weight<br />
3/4 ton 5' - 30' 17.5 - 30 lbs.<br />
1 1/2 ton 5' - 30' 24.5 - 37 lbs.<br />
3 ton 5' - 30' 38.5 - 51 lbs.<br />
6 ton 5' - 30' 64.5 - 77 lbs.<br />
Tirfor 1650 lb. 60'<br />
Tirfor 3500 lb. 60'<br />
Tirfor 7000 lb. 60'<br />
HIGH PRESSURE LIFTING BAGS<br />
Model Capacity Dimensions Stroke<br />
HLB 20 20 Ton 21" x 21" 11.4"<br />
HLB 29 29 Ton 24" x 24" 13.7"<br />
HLB 40 40 Ton 29" x 29" 15.9"<br />
HLB 67 67 Ton 36" x 36" 20.5"<br />
HYDRAULIC JACKS<br />
Type Capacity<br />
Hydraulic Bottle 5 - 100 ton<br />
Hydraulic Cylinder 5 - 100 ton<br />
Transmission 1 ton<br />
Floor 3 ton<br />
Toe 5 - 10 ton<br />
Pallet 5000 lb.<br />
Reel 5 - 20 ton<br />
Track 10 - 15 ton<br />
Rams • 5 ton – 100 ton • Low profile<br />
• Flat • Standard<br />
• Spreaders • Double acting hollow hole<br />
• min height 1 5/8"<br />
Pumps • Hand pumps • Single speed<br />
• Power pumps • Two speed<br />
• Electric c/w gauges • Manifolds - control 2 or more rams<br />
MACHINE SKATES<br />
Model Each Capacity Total Capacity Weight<br />
KRS-8-45 2 Ton 8 Ton 39 Kg<br />
KRS-15-SLD 3.75 Ton 15 Ton 72 Kg<br />
KRS-30-SLD 7.5 Ton 30 Ton 77 Kg<br />
KRS-60-SLD 15 Ton 60 Ton 97 Kg<br />
Each set complete with case, 4 rollers and steer handles.<br />
material handling<br />
38 1.866.285.5550
SHACKLES/RIGGINGS<br />
A complete line of Shackles, wire rope chokers and nylon slings are available<br />
SNATCH BLOCKS<br />
Size Type<br />
4" - 10" single sheave<br />
4" - 10" double sheave<br />
FORKLIFTS (STRAIGHT MAST)<br />
Model Weight Capacity Fuel<br />
<strong>Cat</strong> 20K 7300 lbs. 4000 lbs. Gas/LP<br />
<strong>Cat</strong> 25K 8100 lbs. 5000 lbs. Gas/LP<br />
<strong>Cat</strong> 4WD / Sellick 10,500 lbs. 10,000 lbs. Diesel<br />
TELESCOPIC HANDLERS<br />
Weight Capacity<br />
Model HP (lbs) (lbs) Lift Height Reach<br />
TH255B 84 10,800 5,500 18.4' 10.83'<br />
TL642 99 20,240 6,500 42' 30'<br />
TL943 99 26,050 9,000 43' 31.4'<br />
TH514 101 23,772 11,000 45' 30.27'<br />
TL1055 125 34,910 10,000 55' 42.5'<br />
TL1255 141 35,644 12,000 55' 42.5'<br />
* We also have attachments such as buckets/truss booms/lift hooks etc.<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
39
modu-loc fence<br />
Description<br />
4' x 10'<br />
6' x 10'<br />
8' x 10'<br />
Whether it's a construction job site, a propane bottle enclosure, a temporary compound for a garden centre or a spectator event, <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong><br />
<strong>Store</strong> can provide the fence you need to provide security, privacy and image to meet the needs of your site. We understand your job site cycle<br />
and all of its challenging tasks, as well as it's tight deadlines.<br />
Our fence is available in heights of 4', 6' and 8', so no matter what your requirments no job is too big or too small.<br />
modu-loc fence / moving<br />
40 1.866.285.5550
moving<br />
CONVEYORS<br />
Type<br />
5 ft. Router Type<br />
25 ft. Electric 110 Volt or 230 Volt<br />
30 ft. Electric 110 Volt or 230 Volt<br />
48 ft. Gas<br />
DOLLIES<br />
Item<br />
• Fridge<br />
• Freezer<br />
• Barrel<br />
• Piano<br />
• Cast of wheel platform<br />
• Cargo<br />
• Bottle - oxygen/acetylene<br />
STORAGE / SEA CONTAINERS<br />
Type<br />
8 x 20'<br />
8 x 40'<br />
Sea containers are available as tool cribs c/w lights, shelves, heat and more.<br />
TOOL CRIBS<br />
Type<br />
8 x 20' Skid<br />
28' Trailer<br />
53' Trailer<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
41
pipe equipment<br />
BEVELLERS<br />
Type Size<br />
Bevelling Bands 8" - 30"<br />
Bevelling Machines 1" - 30"<br />
A full line of attachments are available including: torches, crawlers and out of round attachments.<br />
CLAMP LINE UP<br />
Type Size<br />
External 2" - 48"<br />
External Ratchet 16" - 42"<br />
CUTTERS<br />
Type Size<br />
Rotary 5"- 26"<br />
Hinges 2"- 12"<br />
Hand Ridgid 1/8"- 6"<br />
Tube 1/8"- 1 1/8"<br />
PLUGS<br />
Type Size Rating<br />
Gas bag 2" - 30" 3-15 PSI<br />
Pneumatic 2" - 36" 5-35 PSI<br />
Wing nut low pressure 1 1/2" - 15"<br />
Thaxton high pressure 3" - 12" 3000 PSI<br />
Double mechanical 2" - 8"<br />
Accessories are available.<br />
Inflation hoses c/w gauge, hand pumps, compressed air tanks and more available upon request.<br />
REAMERS<br />
Type Size Model<br />
Spiral 1/8" - 2" Riogio 25<br />
Spiral 3/8" - 3" Riogio 35<br />
ROLLERS/ STANDS<br />
Type Size Description<br />
U-Neck adjustable 6" pipe Tripod<br />
Roller adjustable 6" pipe Tripod<br />
Roller adjustable 2"-30" pipe<br />
pipe equipment / plumbing<br />
42 1.866.285.5550
THREADERS<br />
Type Size Description<br />
Manual 1/8" - 2" Ridgid 12R<br />
Manual 2 1/2" - 4" Ridgid 141<br />
Manual 4" - 6" Ridgid 161<br />
Electric (Hand held) 1/8" - 2" Ridgid 700<br />
Electric 1/8" - 2" Ridgid 535<br />
We carry a full line of pipe vises, universal drive shafts, die heads, adapters and more.<br />
VISES<br />
Type Size Description<br />
Manual chain tripod 1/8" - 5"<br />
Electric tripod 1/8" - 2" Ridgid 300<br />
WRENCHES<br />
Type Size<br />
Steel 6" - 36"<br />
Aluminum 6" - 48"<br />
plumbing<br />
PIPE THAW UNITS<br />
Type<br />
110 Volt<br />
Hot water / Steam<br />
SEWER SNAKES<br />
Type Size<br />
Manual 25' - 100'<br />
Electric 110 Volt 25' - 100'<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
43
pumps<br />
AIR OPERATED DIAPHRAM PUMPS<br />
Max. Max. Approx.<br />
Size CCM PSI USGPM Head Weight<br />
1" 5 - 40 100 0 - 35 220 35<br />
2" 20 - 140 100 0 - 174 220 75<br />
3" 20 - 140 100 0 - 230 220 150<br />
Units are Bolted Aluminum and Buna fitted.<br />
Caution! Never exceed 125 PSI.<br />
CENTRIFUGAL PUMPS<br />
Max. Max. Approx.<br />
Size Type GPM Head Weight<br />
3/4" electric 115 Volt 15 40 15<br />
1 1/4" electric 115 Volt 45 60 20<br />
1 1/2" Gas 60 120 25<br />
2" electric 115 Volt 60 70 125<br />
2" Gas 135 110 60<br />
3" Gas 260 100 70<br />
4" Gas 450 90 150<br />
DISCHARGE & SUCTION HOSES<br />
Description Size & Length Hose Fittings Hose Type<br />
3/4" Garden Hose 3/4" x 50' Garden Hose Rubber<br />
2" Discharge Hose 2" x 50' CamLock Lay Flat / Rubber<br />
3" Discharge Hose 3" x 50' CamLock Lay Flat / Rubber<br />
4" Discharge Hose 4" x 50' CamLock/Godwin Lay Flat / Rubber<br />
6" Discharge Hose 6" x 50' CamLock/Godwin Lay Flat / Rubber<br />
8" Discharge Hose 8" x 50' CamLock/Flange Lay Flat / Rubber<br />
1 1/2" Fire Hose 1 1/2" x 50' Brass Rubber & Canvas<br />
2 1/2" Fire Hose 2 1/2" x 50' Brass Rubber & Canvas<br />
3/4" Suction Hose* 3/4" x 20' Garden Hose Hard Rubber<br />
2" Suction Hose* 2" x 20' CamLock Hard Rubber<br />
3" Suction Hose* 3" x 20' CamLock Hard Rubber<br />
4" Suction Hose* 4" x 20' CamLock Hard Rubber<br />
6" Suction Hose* 6" x 20' CamLock Hard Rubber<br />
8" Suction Hose*<br />
*Comes with strainer.<br />
Please ask about irrigation piping for larger or specialty projects.<br />
8" x 20' CamLock Hard Rubber<br />
FIRE PUMPS<br />
Size Type<br />
1 1/2" High Pressure<br />
2 1/2" High Pressure<br />
Overtime hours may apply.<br />
Accessories<br />
Firehouse nozzles 1 1/2" & 2 1/2"<br />
Discharge Fire Hose 1 1/2" & 2 1/2"<br />
Contact order desk for your requirements.<br />
pumps<br />
44 1.866.285.5550
FUEL TANKS AND PUMPS<br />
100-160 Gallon Tidy Tank<br />
Hand Barrel Pump<br />
12 Volt Pump<br />
110 Volt Electric Pump<br />
FUEL TRANSFER PUMPS<br />
Discharge Diameter Type<br />
3/4" 12 Volt<br />
3/4" 110 Volt<br />
3/4" Manual<br />
Order your fuel tank requirements complete with fuel transfer pump, contact your nearest order desk for information.<br />
HIGH HEAD PUMP DIESEL DRIVEN<br />
Suction & Discharge Trailer or Max. Solid Max.<br />
Diameter skid mount USGPM Handling Head Weight Model<br />
4" x 3" ✓ 450 1" 325 ft. 3050 Godwin HL80M<br />
6" x 6" ✓ 1000 1 3/8" 500 ft. 8900 Godwin HL5M<br />
12" x 10" ✓ 4000 3" 390 ft. 13500 Godwin HL250M<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> exclusively uses “Godwin” Diesel Driven Dri-Prime pumps, with industry leading features like Automatic Priming and<br />
indefinite Dry-Running capabilities.<br />
HYDROSTATIC TEST PUMP<br />
gallon Jerry can style 3000 PSI<br />
Baker Hand test pump 6000 PSI<br />
Haskel AW60 Air 6000 PSI<br />
Haskel AW100 Air 10,000 PSI<br />
Haskel AW150 Air 15,000 PSI<br />
Hydrostatic Gas 600 PSI<br />
Hose and Gauge with each pump.<br />
SUBMERSIBLE ELECTRIC DEWATERING<br />
Approx. Weight Max. Max.<br />
Size H.P. Voltage Phase (lbs.) Head USGPM<br />
3/4" L.D. 1/16 115 1 8 26 ft. 20<br />
2" L.D. 1/2 115 1 33 35 ft. 60<br />
2" H.D. 1 115 1 68 50 ft. 90<br />
2" M.U. 1/2 115 1 33 35 ft. 50<br />
3" H.D. 2/3 115/230 1 80 70/85 ft. 110/130<br />
*4" H.V. 9 230/460/575 3 130 105 ft. 525<br />
*4" H.H. 9 230/460/575 3 130 160 ft. 300<br />
*6" H.V. 34 230/460/575 3 400 110 ft. 1600<br />
*6" H.H. 34 230/460/575 3 400 275 ft. 600<br />
*8" H.V. 55 460/575 3 700 160 ft. 2500<br />
*8" H.H. 55 460/575 3 700 325 ft. 1200<br />
*10" H.V. 94 460/575 3 1300 125 ft. 5200<br />
*10" H.H. 94 460/575 3 1300 225 ft. 2000<br />
L.D. = Light Duty H.D. = Heavy Duty M.U. = Mop-Up H.V. = High Volume H.H. = High Head<br />
*units c/w 60 ft. cable and starter box<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
45
SUBMERSIBLE ELECTRIC SOLIDS HANDLING<br />
Weight Max. Max. Solids<br />
Size H.P. Voltage Phase (lbs.) Head USGPM Handling<br />
2" 1 115/230 1 30 45 70 1"<br />
*4" 11.5 230/460 3 300 60 750 3"/1 1 /4"<br />
*unit c/w 30 ft. cable and starter box, solids handling with agitator is 1 1 /4".<br />
TRASH<br />
Suction &<br />
Discharge Trailer or Max. Solid Max.<br />
Diameter skid mount USGPM Handling Head Weight Model<br />
2" Gas 190 1" 90 ft. 82 lbs Tsurumi EPT3-50 HA<br />
3" Gas 360 1" 96 ft. 136 lbs Tsurumi EPT3-80 HA<br />
4" Gas 570 1 1/2" 91 ft. 160 lbs Tsurumi EPT3-100 HA<br />
*4" Diesel ✓ 750 2" 110 ft. 1734 lbs Godwin CD 100M<br />
*6" Diesel ✓ 1800 3" 150 ft. 3200 lbs Godwin CD 150M<br />
*8" Diesel ✓ 3200 3 1/8" 170 ft. 5000 lbs Godwin CD 225M<br />
*10" Diesel ✓ 3600 3 1/8" 170 ft. 7000 lbs Godwin CD 250M<br />
*12" Diesel ✓ 6000 3 3/4" 170 ft. 9600 lbs Godwin CD 300M<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> exclusively uses “Godwin” Diesel Driven Dri-Prime pumps, with industry leading features like Automatic Priming and<br />
indefinite Dry-Running capabilities.<br />
safety equipment<br />
Item Item<br />
• Hard Hats • Full Face Shields<br />
• Glasses • Body Harness<br />
• Belt with 6' Ianyard • Shock absorbing lanyards<br />
• Stretchers • First Aid Kits<br />
• Spill Kits • ABC Dry Chemical Fire Extinguishers<br />
• Manhole Fans with ducting – Gas and Electric<br />
• Gas Detectors<br />
• Heat Exposure Monitor<br />
safety equipment / scaffolding / survey equipment<br />
46 1.866.285.5550
scaffolding<br />
Description Size<br />
Brace 7' x 2'<br />
Brace 7' x 4'<br />
Frame 3' x 5'<br />
Frame 5' x 3'<br />
Frame 5' x 5'<br />
Deck Aluminum 7'<br />
Deck Aluminum 10'<br />
Guard rail 5'<br />
Guard rail 7'<br />
Guard rail 10'<br />
We can supply a complete range of scaffolding and relative products. Contact the store nearest you for details.<br />
survey equipment<br />
Description<br />
Laser Level Exterior<br />
Laser Level Interior/Exterior<br />
Builders Level<br />
<strong>The</strong>odolite<br />
Survey Rod<br />
Tripods<br />
Measuring Wheels<br />
Measuring Tapes<br />
Ask about certifications and repairs of survey equipment.<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
47
temperature control<br />
HEATING<br />
ELECTRIC<br />
Model BTU's <strong>The</strong>rmostat Volt Watts CFM<br />
Patron E 1.5 5,100/hr c/w 120 1,500 116<br />
Patron E 3 10,200/hr c/w 240 3,000 205<br />
Patron E 9 30,700/hr c/w 240 9,000 350<br />
Ciscan n/a n/a 240 4,800 n/a<br />
INDIRECT “FIRED”<br />
Fuel Fuel Duct Fan<br />
Model BTU's Fuel Consumption Capacity Vents CFM<br />
Frostfighter OHV 350 320,000 Kerosene 2.0 GPH 35 GAL (2) x 12" 2,000<br />
Frostfighter OHV 500 420,000 Kerosene 2.5 GPH 35 GAL (2) x 12" 2,800<br />
Frostfighter OHV 350 350,000 Prop/Nat.Gas N/A N/A (2) x 12" 2,500<br />
Frostfighter OHV 500 450,000 Prop/Nat.Gas N/A N/A (2) x 12" 2,800<br />
Frostfighter MH1000 1,000,000 Diesel 4.7 GPH 191 GAL (4) x 12" 5,600<br />
Ducting available: 12" x 12' Partially lined<br />
12" x 12' Fully lined<br />
12" x 12' Hi Temp Silicon<br />
Propane/Natural gas hoses & regulators available upon request.<br />
Ground Heater Cub 200 242,000 Diesel 1.28 GPH 26.42 GAL 1,720*<br />
Ground Heater Cub 300 242,000 Diesel 2.15 GPH 36.72 GAL 3,690*<br />
Ground Heater Cub 400 304,000 Diesel/Nat.Gas/Propane 2.71 GPH/380 CFH/4.15 GPH 67 GAL 5,200*<br />
Ground Heater Cub 700 576,000 Diesel/Nat.Gas/Propane 5.13 GPH/720 CFH/7.87 GPH 256 GAL 4,000<br />
Arctic Bear XHD 332,500-577,500 Diesel 3.55-6.0 GPH 256 GAL 4,000<br />
*assumes intake air of 50ºF (10ºC).<br />
HYDRONIC HEATING<br />
Ground and Concrete Applications<br />
Model BTU Fuel Type Frost Prevention Thawing Concrete Cure<br />
Ground Heater E1100 126,000 Diesel up to 3,300 sq/ft 1,100-2,200 sq/ft up to 2,200 sq/ft<br />
THAWZALL H150 175,000 Diesel up to 2,400 sq/ft up to 2,400 sq/ft up to 6,000 sq/ft<br />
Ground Heater E3000 385,000 Diesel up to 9,000 sq/ft up to 6,000 sq/ft up to 6,000 sq/ft<br />
THAWZALL H250 280,000 Diesel up to 9,000 sq/ft up to 6,000 sq/ft up to 18,000 sq/ft<br />
temperature control<br />
48 1.866.285.5550
Space Heating and Drying Applications<br />
Model BTU Fuel Type<br />
Pure Heat 1260 860,000 Diesel, Propane or Natural Gas<br />
Configuration of Heat Exchanger Options: 16- 50,000btu, 8- 100,000btu, 4- 200,000btu<br />
THAWZALL XH850 900,000 Diesel, Propane or Natural Gas<br />
Configuration of Heat Exchanger Options: 10- 100,000btu, 4- 60,000btu<br />
Configurations may be mixed but must not exceed the maximum BTU rating on the base unit (subject to availability)<br />
Explosion Proof Exchangers<br />
THAWZALL CF100XP<br />
2000CFM<br />
Class 1, Division 1, Group D<br />
Fits 24" Manway<br />
Infra-Red<br />
Fuel<br />
Model BTU Type Fuel Consumption<br />
Patron MH14TC 14,000 Bottle Propane n/a<br />
Patron MH14TC 26,000 Bottle Propane n/a<br />
Patron 6100L 30,000 Stand. Propane 1.5lbs/hr.<br />
Patron 6300L 60,000 Stand. Propane 3 lbs/hr.<br />
Patron 120L 120,000 Stand. Propane 6 lbs/hr.<br />
<strong>Cat</strong>adyne 6,000 Stand. Propane/Natural Gas .4 lbs/hr.<br />
DIRECT FIRED<br />
Model BTU's Fuel Consumption Fan CFM <strong>The</strong>rmostat<br />
Patron Format 10T 40,000 Propane 1.85lb/hr 200 c/w<br />
Patron Format 25T 85,000 Propane 4.5 lb/hr 280 c/w<br />
Patron Format 50T 190,000 Propane 9.0 lb/hr 600 c/w<br />
Comes with 15' Propane hose and regulator.<br />
Sureflame S150 150,000 Propane 6.9 lb/hr Optional (1500) n/a<br />
Sureflame S300 300,000 Propane 13.8 lb/hr Optional (1500) n/a<br />
Sureflame S400T 400,000 Propane 18.5 lb/hr 1600 c/w<br />
Sureflame SL11B 1,000,000 Propane/Nat.Gas 46.2 lb/hr 4500 n/a<br />
Sureflame S1500 1,500,000 Propane/Nat.Gas 69.2 lb/hr 4500 c/w<br />
Sureflame S2200 2,250,000 Propane/Nat.Gas 105 lb/hr 11000 c/w<br />
Propane/Natural gas hoses and regulators are available upon request.<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
49
STEAM HEATING<br />
Steam Heaters<br />
Model BTU’s Volt Max PSI CFM<br />
RUFFNECK AH-12A 124,563 115/230 450 1150<br />
RUFFNECK AH-16A 205,452 115/230 450 1840<br />
RUFFNECK AH-24A 411,828 115/230 450 3890<br />
RUFFNECK HP1-24 401,400 115/230 300 3405<br />
BTU’s based on 60 PSI @ 60°F entering air temp.<br />
Available in Ex-proof and non Ex-proof.<br />
Explosion-Proof Fan Forced Air Heaters<br />
Model BTU’s Volt CFM<br />
RUFFNECK FX412-480360-10-T 34,100 480 850<br />
RUFFNECK FX420-480360-25-T 85,300 480 3600<br />
Explosion-Proof Convection Heaters<br />
Model KW BTU’s Volt Phase<br />
RUFFNECK CX-B3-B3 1.8 6,146 240 1<br />
RUFFNECK CX-D3-B3 4.8 16,389 240 10<br />
Corrosion-Resistant Washdown Heaters<br />
Model BTU’s Volt CFM<br />
RUFFNECK CR1-480360-10 34,100 480 700<br />
RUFFNECK CR1-480360-35 119,400 480 2100<br />
FLAME FREE (HEATERS)<br />
Fuel Fuel Fan<br />
Model BTU's Fuel Consumption Capacity CFM<br />
Magtek Tundra 1500 1,300,000 Diesel #2 11.5 GPH 270 GAL 5,000<br />
<strong>The</strong>rm Dynamics 900 DR 1,200,000 Diesel #2 8.6 GPH 170 GAL 7,200<br />
• Safe, Efficient Flame Free Technology<br />
• Engine air intake shut off<br />
temperature control<br />
50 1.866.285.5550
CALCULATION<br />
BTU REQUIREMENT CALCULATION<br />
For professional and site specific calculations contact your <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> representative.<br />
Cu. ft. x (cu. ft. factor x insulation factor) = BTU required<br />
1. Establish the number of cu. ft. to be heated:<br />
Width x length x height of the room = number of cu. ft.<br />
2. Establish the variation between the outdoors and indoors required temperature:<br />
-20 o C outdoor and +10 o C required indoor = variation of 30 o C<br />
3. Establish the cu. ft. factor:<br />
Variation of 10 o between outdoor and indoor required temperature = Factor 0.4<br />
Variation of 20 o between outdoor and indoor required temperature = Factor 0.6<br />
Variation of 30 o between outdoor and indoor required temperature = Factor 0.8<br />
Variation of 40 o between outdoor and indoor required temperature = Factor 1.0<br />
4. Establish the insulation factor:<br />
Insulated: Windows and walls installed = Factor 2.0<br />
Fairly insulated: Walls in position, no windows installed = Factor 4.0<br />
Poorly insulated: Few walls installed = Factor 7.0<br />
Not insulated: No walls and windows, only tarps = Factor 8.5<br />
5. Calculation of BTU requirements:<br />
Cu. ft. x (cu. ft. factor x insulation factor) = BTU required<br />
Example :<br />
• Room dimension: 100’ x 100’ x 30’ = 300 000 cu. ft.<br />
• Outdoor temperature of -20 o C goal of +10 o C indoor variation of 30 o C = Factor 0.8<br />
• Room is insulated = Factor 2.0<br />
(100 x 100 x 30) x (0.8 x 2) = 480 000 BTU required<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
51
COOLING<br />
Chillers 15 ton<br />
Portable air conditioners 1 ton<br />
Hydronic<br />
Portable Hydronic* (coming soon)<br />
*Contact your local <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> representative for calculations.<br />
AIR MOVEMENT<br />
FANS<br />
Fuel Fuel Fan<br />
Model BTU's Fuel Consumption Capacity CFM<br />
F174 Dri-Eaz Vortex fan 2,041 12 35<br />
AMDD365 Uniquip Axial fan 36 in 10,200 36 91<br />
FN42 Sureflame Axial fan 42 in 14,000 42 100<br />
FN20c Sureflame Fan 20 in 5,000 20 50<br />
IHP-24P TPI Pedestal fan 24 in 7,000 24 75<br />
AMPF30 Uniquip Pedestal fan 30 in 9,500 30 67<br />
UB18E Sureflame Fan explosion proof 18 in 4,700 24,5 90<br />
N/A Allemand Fan explosion proof 30 in n/a n/a n/a<br />
H3500 Husky Turbo floor dryer 3,500 17 38<br />
F203 Dri-Eaz Industrial deshumidifier 227 n/a 80<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
52
AIR QUALITY<br />
Water and Wastewater Treatment<br />
Wastewater releases odor and volatile compounds during its travel to the processing plants and during the treatment process. <strong>The</strong> use of<br />
chemicals, bio filters, and carbon filters have not completely solved the odor problems and the capital and operating costs and energy<br />
consumption is very high. Sol-Air systems are a fraction of the capital costs and they eliminate the contamination using a natural process that<br />
adds nothing new to the environment and uses up to 90% less energy when compared to competing technologies.<br />
Medical Industry<br />
Sol-Air systems are used by hospitals and senior care facilities for air decontamination of odors, viruses, bacteria’s and mold spores. Laboratory<br />
testing at the University of Alberta show a 98% kill rate of the pathogens tested with the Sol-Air technology. <strong>The</strong> Sol-Air systems are used in<br />
isolation rooms, operating rooms, dressing rooms, patient rooms, common areas, morgues and numerous other areas in the facilities.<br />
Oil Industry<br />
Globally, air quality issues are posing escalating risks on health and the environment. Odors, bacteria, viruses and molds are causing<br />
significant problems in industries such as wastewater, oil and gas, fire and flood, agriculture, health and travel. Sol-Air Systems’ line of<br />
patented proprietary UV Air Decontamination Technologies is uniquely positioned to address these issues.<br />
Restoration Industry<br />
<strong>The</strong> Restoration industry in North America is busy, with fire and flood damage occurring daily. Fire and floods do not always completely destroy<br />
a building and in those cases a restoration company can repair the damage. Restoration companies use Sol-Air products to remove smoke odor<br />
from fires, mold and mildew from flooding in a very cost and time effective way.<br />
temperature control<br />
53 1.866.285.5550
temporary power<br />
BENDING<br />
CABLE BENDERS<br />
Greenlee 796 Ratchet Cable Bender up to 500 MCM<br />
Greenlee 800 Hydraulic Cable Bender c/w hand pump, 350 MCM through 750 MCM<br />
CONDUIT BENDERS - EMT<br />
Greenlee 855 Smart Bender EMT, IMC & Rigid Conduit Electric Conduit Bender for 1/2" to 2"<br />
Current 77 Series Electric Bender EMT, IMC & Rigid Electric Conduit Bender for ½" to 2"<br />
Greenlee 881CTD Multi-Purpose Bender for One Shot 90° Bends 2½", 3", and 4" EMT, IMC and Rigid<br />
Greenlee 882 Flip-top Bender 1¼" to 2" c/w Hydraulic Hand Pump<br />
BENDING SHOES<br />
UPC No. Size DESCRIPTION<br />
18764 1" Ductile Iron Shoe 5-3/4" Centerline Radius<br />
18743 1-¼" Ductile Iron Shoe 5-3/4" Centreline Radius<br />
18745 1-½" Ductile Iron Shoe 5-3/4" Centerline Radius<br />
18747 2" Ductile Iron Shoe 5-3/4" Centerline Radius<br />
19504 2-½" Ductile Iron Shoe 5-3/4" Centerline Radius<br />
19504 4" Ductile Iron Shoe 5-3/4" Centerline Radius<br />
For Bending Schedule 40 - Double x<br />
Use with 777, 880, 885 Benders - Bend up to 90º in one-shot<br />
CONDUIT BENDERS - RIGID<br />
Greenlee 855 Smart Bender EMT, IMC & Rigid Electric Conduit Bender for 1/2" to 2"<br />
Current 77 Series Electric Bender EMT, IMC & Rigid Electric Conduit Bender for ½" to 2"<br />
Greenlee 880 One-Shot Lightweight Bender c/w Hydraulic Hand Pump ½" to 2"<br />
Greenlee 881CTD Multi-Purpose Bender for One Shot 90° Bends 2½”, 3", and 4" EMT, IMC and Rigid<br />
Power source: 960/980: 120 VAC Electric Hydraulic Pump<br />
Greenlee 885 Rigid Conduit Bender One-Shot and Segment Bender 1¼" to 4" One Shot Bends, 5" Segment Bends<br />
Power source: 960/980: 120 VAC Electric Hydraulic Pump<br />
Greenlee 1800 or Current 750 Mechanical Bender for ½", ¾", and 1" IMC and Rigid Conduit<br />
Greenlee 1801 or Current 751 Mechanical Bender for 1¼" and 1½" Rigid and IMC Conduit<br />
CONDUIT BENDERS – PVC<br />
Greenlee 848 or Current 453 Electric PVC Heater/Bender with Motorized PVC Rotation for ½" – 6"<br />
c/w Greenlee 859 or Current 460 PVC Plug Set 2" – 6"<br />
Greenlee 849 or Current 450 Electric PVC Heater/Bender ½" through 2" PVC<br />
Greenlee 851 Electric or Current 451 PVC Heater/Bender for ½" – 4", c/w Greenlee 859-4 PVC Plug Set 2" – 4"<br />
temporary power<br />
54 1.866.285.5550
TUBING BENDER<br />
¾" 02550 TUG 3<br />
1" 06842 TUG 5<br />
1¼" 02554 TUG 7<br />
1½" 02556 TUG 9<br />
1¾" 020525 TUG 11<br />
Greenlee 782 Tubing Bender (includes one shoe group)<br />
BENDING TABLES<br />
Greenlee 1802 or Current 280 Bending Table<br />
Greenlee 1813 or Current 281 Bending Table<br />
ELECTRIC PUMPS<br />
Hand Operated and electric Hydraulic pumps available<br />
cOntact tHe cat rental stOre<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
55
CABLE PULLING<br />
CABLE PULLERS<br />
Greenlee 445 Foot Switch<br />
Greenlee 805 Fibre Optic Puller<br />
Greenlee 6000 Heavy Duty Cable Puller Kit<br />
Greenlee 6001 Cable Puller Only, 6500 lb. pull<br />
Greenlee 6006 Super Tugger Complete Puller Package<br />
Greenlee 6037 Floor Mount for Puller<br />
Greenlee 6800 Ultra Tugger Cable Puller With Standard Force Gauge & Floor Mount, 8000 lb. pull or Current 8845<br />
Greenlee 00866 Chain Mount (for use with Greenlee 6800)<br />
Greenlee 6802 Ultra Tugger Cable Puller With Standard Force Gauge, Pipe Adapter Sheave, Floor Mount, and “T” Stand, 8000 lb. Pull<br />
Greenlee 6805 Ultra Tugger Cable Puller complete with Versi-Boom System and wheeled carriage, 8000 lb. pull<br />
CABLE ROLLERS AND SHEAVES<br />
Greenlee 441-Feeding Sheaves - 3", 3½", 4", 5" and 6"<br />
Greenlee 631 Radius Cable Sheave or Current 12048 with 10 wheels, 48"<br />
Greenlee 636 Radius Cable Sheave with 4 wheels, 16"<br />
Greenlee 637 Radius Cable Sheave or Current 12024 with 6 wheels, 24"<br />
Greenlee 638 Radius Cable Sheave or Current 12036 with 8 wheels, 36"<br />
Greenlee 639 Right Angle Twin Yoke Sheave or Current 4428<br />
Greenlee 649 Pipe Adapter Sheave for use with 640 Tugger Cable Puller<br />
24" Reels<br />
Greenlee 650 Hook-Type Cable Sheave or Current 406 6"<br />
Greenlee 651 Hook-Type Cable Sheave or Current 412 12"<br />
Greenlee 652 Hook-Type Cable Sheave or Current 418 18"<br />
Greenlee 653 Hook-Type Cable Sheave or Current 424 24"<br />
Greenlee 8024 Hook Sheave or Current 824 24"<br />
Greenlee 658 Tray-Type Sheaves or Current 951TR 12"<br />
Greenlee 659 Tray-Type Sheaves or Current 952TR<br />
Greenlee 6036 Triple Sheave Cable Guide or Current 333<br />
Greenlee 6049 Adapter Sheave for use with 6001 Super Tugger Cable Puller<br />
22"<br />
Greenlee 2018R Radius Cable Roller or Current 9518RR for 12" - 18" Wide Tray<br />
Greenlee 2024R Radius Cable Roller or Current 9524RR for 20" - 24" Wide Tray<br />
Greenlee 2030R Radius Cable Roller or Current 9530RR for 24" - 30" Wide Tray<br />
Greenlee 2036R Radius Cable Roller or Current 9536RR for 30" - 36" Wide Tray<br />
Greenlee 2018S Straight Cable Roller or Current 9518SR for 12" - 18" Wide Tray<br />
Greenlee 2024S Straight Cable Roller or Current 9524SR for 20" - 24" Wide Tray<br />
Greenlee 2030S Straight Cable Roller or Current 9530SR for 24" - 30" Wide Tray<br />
Greenlee 2036S Straight Cable Roller or Current 9536SR for 30" - 36" Wide Tray<br />
Greenlee 20249R Right Angle Cable Roller or Current 95024RA 24"<br />
Greenlee 20369R Right Angle Cable Roller or Current 95036RA<br />
Greenlee 459 Light Base Sheave<br />
36"<br />
Note: Cable rollers come complete with J-Hooks<br />
temporary power<br />
56 1.866.285.5550
PULLING GRIPS<br />
Greenlee 629 Pulling Grip c/w rope clevis<br />
Greenlee 39109 Rope Swivel Connectors<br />
Greenlee 39903 Rope Swivel Connectors<br />
Kellam Grips<br />
PULLING ROPE<br />
¾" in lengths of 300', 600', 1200' *sale item only<br />
VACUUM/BLOWER<br />
Greenlee 690 Combination Blower & Vacuum Fish System (mice and string consumables)<br />
Greenlee 607 String 1350' 90 lbs.<br />
Vacuum Fishing System Accessories available ½” – 4”<br />
CABLE STANDS & REEL JACKS<br />
Greenlee 656 Ratchet Type Heavy Duty Telescoping Reel Stand or Current 680<br />
Greenlee 657 Spindle (for 656 Reel Stand) or Current 681<br />
58" to 90" Diameter Reel - 3750 lbs. Capacity<br />
Greenlee 683 Screw-type Telescoping Reel Stand or Current 670<br />
Greenlee 684 Spindle (for 683 Reel Stand) or Current 671<br />
46" to 96" Diameter Reel - 2500 lbs. Capacity<br />
Greenlee 687 Screw-type Telescoping Reel Stand or Current 660<br />
Greenlee 647 Spindle (for 687 Reel Stand) or Current 661<br />
28" to 56" Diameter Reel - 2500 lbs. Capacity<br />
Simplex A1029, 10 Ton Jack 36" - 84" Diameter Reel<br />
Simplex 320, 5 Ton Ratchet Reel Jack 20" to 60" Diameter Reel<br />
Simplex 321, 10 Ton Ratchet Reel Jack 20" to 96" Diameter Reel<br />
34" to 48" Diameter Reel<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
57
CUTTERS & WIRE CRIMPERS<br />
CUTTERS<br />
Greenlee 750 Hydraulic Cutter c/w hand pump<br />
Cuts up to 1000 MCM<br />
Greenlee 756 Heavy Duty Cable Cutter<br />
1500 MCM<br />
Greenlee ES1000-11 Gator Battery-Powered Cable Cutter<br />
Guide Strand Rebar, Wire Rope<br />
Greenlee ESG50GL11 Gator Battery Powered Cable Cutter<br />
Cutting Capacity: 2"(50 mm) diameter Al or Cu cable<br />
MULTI-PURPOSE TOOL<br />
Greenlee ECCX11 Multi-purpose Tool (Cutter, Crimper, Punch)<br />
Battery operated<br />
WIRE CRIMPERS<br />
Greenlee 1981 Dieless Crimper #8-250 MCM<br />
Greenlee EK1240 Battery-Powered Crimping Tool<br />
12 Ton with 12V Battery and 120V Charger #2-1500 MCM<br />
Greenlee EK1240L-11 Battery Powered Crimping Tool<br />
12 Ton with 18V Battery and 120V Charger #2-1500 MCM<br />
Thomas & Betts TBM 14M Hydraulic Crimper #8-750 MCM<br />
Thomas & Betts TBM 15 Hydraulic Tool, 15 Ton #2-1000 MCM<br />
Thomas & Betts TBM-14 & TBM-15 Crimper Dies, assorted<br />
Thomas & Betts TBM8-750 Remote Dieless Crimper Head #8-750 MCM<br />
Thomas & Betts TBM 14BSCR 14 Ton Battery Powered Compression Tool<br />
We offer Crimper Pressure Test Calibrations for customer owned <strong>tools</strong>.<br />
temporary power<br />
Various makes and models.<br />
58 1.866.285.5550
HOLEMAKING<br />
KNOCKOUT PUNCHES<br />
Greenlee 709 Stud Punch or Current 140 7/8" Diameter Stud Punch<br />
Greenlee 710 Stud Punch or Current 141 1-11/32" Diameter Stud Punch<br />
Greenlee 7307 Slug Splitter Knockout Punch Kit (driver not included) ½" to 2" Conduit or Current 160SS (10GA Stainless steel)<br />
Greenlee 7506 Hydraulic Slug Splitter Knockout Drive Set c/w hand pump ½" to 2" conduit or Current 161SS (10GA Stainless steel)<br />
Greenlee 7806SB Knockout Punch Set or Current 170PM ½" to 2" conduit<br />
Greenlee 7906SB, ½" - 2" Slug Buster Quick Draw Driver Kit or Current 179PM (10GA & 14GA mild steel)<br />
Greenlee 38520 Hydraulic Slug Buster or Current 154PM Knockout Drive Set c/w hand pump ½" - 3" and 4" (10GA mild steel)<br />
Greenlee 743BB Knockout Punch 5" conduit (Hole Size 5-5/8")<br />
Greenlee LS6011B Battery-Powered Knockout Punch Driver Kit<br />
ELECTRIC HEATERS<br />
Patron E9 Patron 40E Patron 40ECA<br />
BTU/Hour 30,700 133,000 133,000<br />
Watts 9kW 16kW/32kW/40kW 16kW/32kW/40kW<br />
Volts/Amps 240/40A 480v/60A 575v/60A<br />
<strong>The</strong>rmostat 32˚F-104˚F 32˚F-104˚F 32˚F-104˚F<br />
Phase 1PH 3PH 3PH<br />
Airflow 350 CFM 1,765 CFM 1,765 CFM<br />
Weight 22" x 18" x 12" 46" x 20" x 25" 46" x 20" x 25"<br />
LOAD BANKS<br />
Size Voltage<br />
250kW 120/240/208/480/600<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
59
60 temporary power<br />
1.866.285.5550
WE STOCK IN OUR RENTAL FLEET<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
61
STANDARD TEMPORARY POWER CENTERS<br />
HV4, 6, 8 FREE STANDING HIGH VOLTAGE PANEL<br />
<strong>The</strong> HV4, 6, or 8 is used in cases where 600 or 480 Volt distribution is required.<br />
• Steel frame.<br />
• Weatherproof (3R rated) construction<br />
• Square D Visible Blade Disconnects for safety and reliability.<br />
• 400 Amp splitter.<br />
• Secondary (60 amp) Disconnects c/w, AR642 Receptacles available.<br />
• Available with four, six and eight fused disconnects.<br />
• Various configurations are available upon request.<br />
• CSA Approved<br />
CABLE EXTRA<br />
LV1 FREE STANDING LOW VOLTAGE PANEL - 1 PHASE<br />
<strong>The</strong> LV1 is designed to provide power for lighting and power tool use.<br />
• Steel frame<br />
• Weatherproof (3R rated) construction<br />
• One 15 KVA (600 or 480 Volt Primary) Single Phase Transformer<br />
• One 60 Amp Visible Blade Disconnect with AR642 Receptacles available<br />
• One 100 Amp Distribution Panel<br />
• Ten 15 Amp GFI Duplex Receptacles<br />
• Two 20 Amp 125/250-Volt Twist Lock Receptacles.<br />
• Various special configurations available upon request.<br />
• CSA Approved<br />
CABLE EXTRA<br />
LV3 FREE STANDING LOW VOLTAGE PANEL - 3 PHASE<br />
<strong>The</strong> LV3 is designed to provide power for lighting and power tool use, and provide 600 or 480-Volt distribution.<br />
• Steel frame<br />
• Weatherproof (3R rated) construction<br />
• 45 KVA 600 480V Primary, 120/208V Secondary<br />
• 225 Amp / 4W Splitter<br />
• Three 60 Amp Visible Blade Disconnects<br />
• 60 Amp Transformer Disconnect<br />
• 225 Amp Circuit Breaker Load Centre<br />
• Twenty 15 Amp GFI Duplex Receptacles<br />
• Various configurations available upon request.<br />
• CSA Approved<br />
LV3-S<br />
CABLE EXTRA<br />
• Stackable design<br />
• Same specification as LV3 but with two 60Amp visible blade disconnects<br />
temporary power<br />
62 1.866.285.5550
I-LINE POWER DISTRIBUTION PANEL<br />
I-Line Power Distribution Panels are designed to feed lighting and appliance panel boards or large motors.<br />
• 400-1200 Amp 3 Phase, 600V Max<br />
• Freestanding weatherproof (3R Rated) enclosure.<br />
• Consult our office for breakers configuration and pricing.<br />
• CSA Approved.<br />
CABLE EXTRA<br />
8 OUTLET LOW PROFILE HIGH VOLTAGE PANEL, 225 AMP (8 PACK)<br />
8 Pack used in cases where 600 or 480 Volt distribution is required.<br />
• Enclosure is of 16 gauge steel and welded construction<br />
• 45"W x 34"H x 30"D, approximate weight is 200 lbs.<br />
• Optional 200 Amp disconnect available<br />
• c/w 60 Amp Breakers feeding 60 Amp AR 642 Receptacles.<br />
• CSA Approved.<br />
CABLE EXTRA<br />
4-OUTLET LOW PROFILE HIGH VOLTAGE PANEL, 400 AMP (4 PACK)<br />
4 Pack is used in cases where 600 or 480 Volt distribution is required.<br />
• 400 Amp Main Lugs complete with 4 x 100A/APJ10477 or APJ10487 Receptacles.<br />
• CSA Approved.<br />
CABLE EXTRA<br />
MINI-POWER CENTRE<br />
In areas where size is a consideration or a limited number of receptacles are required, the Mini can be used.<br />
• Steel-framed wheeled cart<br />
• Weatherproof (3R rated) construction<br />
• 10 KVA (600 or 480 Volt primary) Single-Phase Transformer<br />
• Square D Visible Blade Disconnect<br />
• Eight (8) GFI duplex Receptacles<br />
• Various configurations are available upon request.<br />
• CSA Approved.<br />
CABLE EXTRA<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
63
TABLE STYLE C PANELS (SINGLE PHASE OR 3 PHASE)<br />
C Panels are designed for use where voltage reduction is not required.<br />
• Using 120/208 Volt 3-Phase or 120/240-Volt Single Phase<br />
• 15 Duplex GFI Receptacles for 120 Volt Distribution<br />
• 100 Amp Main Breaker (Single Phase), 225 Amp load center (3 Phase)<br />
• Steel construction and suitable for outdoor use.<br />
• CSA Approved.<br />
AR’S AND CABLE EXTRA<br />
WELDER SPLITTER STATION<br />
Weatherproof 100 Amp Welder Splitter Station mounted on a freestanding frame for welding distribution. When connected to a 600 or 480 Volt<br />
systems, this panel provides power to two welder units. <strong>The</strong> transformer/load centre component has 4 GFI protected receptacles that can be<br />
used to provide power for lights and <strong>tools</strong>.<br />
• Weatherproof (3R rated) construction<br />
• Two 60 Amp visible blade disconnects w/ AR642 Receptacals<br />
• 4 Duplex Receptacles<br />
• 4 GFI Breakers<br />
• Transformer<br />
5 kVA Single Phase<br />
Primary 480 or 600V<br />
Secondary 120/240V<br />
• CSA Approved<br />
CABLE EXTRA<br />
6 30 112.5 KVA<br />
9 45 150<br />
15 75 225<br />
NOTE: No Neutral on Open Delta Configuration<br />
temporary power<br />
64 1.866.285.5550
PONY BOARDS<br />
Pony Boards are used for satellite feeds. Available with Eight, Twelve and Twenty-Four circuit GFI Receptacles.<br />
• 120/240V Single or 120/208V Three Phase.<br />
• Mounted on a freestanding steel frame.<br />
• GFI receptacles.<br />
• Weatherproof (3R Rated) construction.<br />
• Various configurations available upon request.<br />
• CSA Approved.<br />
CABLE EXTRA<br />
SPIDER BOXES<br />
Spider Boxes are used for satellite feeds. Available with Four circuit GFI receptacles.<br />
• Compact design, with carrying handle mounted on top<br />
• GFI Receptacles<br />
• Weatherproof construction<br />
• CSA Approved<br />
• INCLUDES approximately 50’ of cable<br />
60SP SPLITTER STAND<br />
<strong>The</strong> 100 Amp Splitter Stand is used for welding distribution.<br />
• Weatherproof (3R Rated) 100 Amp Splitter<br />
• Two 60 Amp Disconnects and AR648 (Connectors)<br />
• Mounted on a freestanding steel frame<br />
• Also available w/three 30 Amp Fused Disconnects<br />
• CSA Approved.<br />
CABLE EXTRA<br />
400ST SPLITTER STATION, 400 AMP<br />
<strong>The</strong> 400 Amp Splitter Station is used for power distribution.<br />
• 600V max<br />
• Weatherproof (3R Rated) construction<br />
• 400 Amp Splitter with two 200 Amp Disconnects<br />
• Mounted on a freestanding steel frame<br />
• CSA Approved.<br />
CABLE EXTRA<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
65
CABLE<br />
CABTYRE CABLE<br />
Allowable Amperage<br />
AWG 1 Phase 3 Phase<br />
4c10 30 Amps 25 Amps<br />
4c8 40 Amps 35 Amps<br />
4c6 55 Amps 45 Amps<br />
4c4 70 Amps 60 Amps<br />
4c2 95 Amps 80 Amps<br />
5c4 70 Amps 60 Amps<br />
5c2 95 Amps 80 Amps<br />
4c-1/0 234 Amps 205 Amps 2 kV - Type W<br />
4c-2/0 271 Amps 237 Amps 2 kV - Type W<br />
4c-3/0 313 Amps 274 Amps 2 kV - Type W<br />
4c-4/0 361 Amps 316 Amps 2 kV - Type W<br />
1c-4/0 400 Amps 400 Amps<br />
WELDER EXTENSION CORDS<br />
CABL-50WELD 50' Welder Extension<br />
4c4 Cabtyre, c/w 3W4P APJ/APR 4c6 Cabtyre, c/w 3W4P APJ/APR<br />
CABL-100WELD 100' Welder Extension<br />
4c4 Cabtyre, c/w 3W4P APJ/APR 4c6 Cabtyre, c/w 3W4P APJ/APR<br />
CABLE CONNECTORS<br />
Assortment of Cable Connectors Available - Consult Our Office<br />
66 1.866.285.5550
TRANSFORMERS<br />
AIR COOLED TRANSFORMERS - INDOOR & OUTDOOR – LOW VOLTAGE<br />
A. SINGLE PHASE - STANDARD<br />
Primary Voltages: 240, 480, & 600 Secondary Voltages: 120 / 240<br />
Size Range: 10 - 200 KVA<br />
B. THREE PHASE - STANDARD<br />
Primary Voltages: 480 & 600 Secondary Voltages: 120 / 208<br />
Size Range: 15 - 750 KVA<br />
* other Voltages and configurations available<br />
C. THREE PHASE - WYE AUTO TRANSFORMER<br />
Primary Voltages: 480 - 600<br />
Size Range: 15 KVA - 1,000 MVA<br />
NOTE: No Neutral on Open Delta Configuration<br />
Medium and High Voltage Transformers are available. For specific inquiries please call our office.<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
67
TRANSFORMERS<br />
AIR COOLED - DRY & OIL FILLED – HIGH VOLTAGE<br />
A. Primary Voltages - 13.8 kV, 25 kV<br />
Secondary Voltages - 600/347, 277/480, 240, 120/208<br />
KVA Range 10 - 2500 kVA<br />
Single or Three Phase<br />
B. Primary Voltages - 4160 / 2400<br />
Secondary Voltages - 600/347, 277/480, 240, 120/208<br />
KVA Range 10 - 2500 kVA<br />
ALSO AVAILABLE:<br />
Custom Design<br />
+<br />
Fabrication<br />
Our product development department will provide experienced<br />
electricians to discuss your specific needs. We will work with you<br />
to design power solutions that comply to industry regulations,<br />
and meet your power distribution needs.<br />
temporary power / track-type tractors<br />
68 1.866.285.5550
track-type tractors<br />
Model Attachment HP Weight<br />
D3K LGP Winch 74 17,842 lbs<br />
D5K LGP Winch 96 21,347 lbs<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
69
traffic control<br />
RADIOS<br />
• 2 way radio and charger<br />
SIGNS<br />
• Solar Powered Message Boards • Solar Powered Arrow Boards<br />
• Stop (hand held) • Slow (hand held)<br />
• Lane Change Arrow • Caution<br />
• Wrecker Working • Local Traffic<br />
• Road Repair • Men Working<br />
• Speed Zone • Passing Lane Ends<br />
• Reduce Speed • Lane Ends Ahead<br />
• Truck Crossing • Surveying Crew<br />
• Barricade Ahead • One Lane<br />
• End of Construction Zone • Detour Exit<br />
• Two Way Traffic • Road Closed<br />
• Smoke Ahead • Detour<br />
STANDS<br />
• Barricades<br />
• Cones<br />
Folding style – with or without lights.<br />
Purchase or Rent – Contact the store nearest you for details.<br />
trailers<br />
Type Axle Load<br />
8' Tandem<br />
10' Stock Single<br />
12' Hyd. Dump Tandem 9,000 lbs<br />
16' Tilt Tandem 5,500 lbs<br />
Car 16' Tandem 5,000 lbs<br />
Lowboy 16' CF162<br />
18' Tandem 10,000 lbs<br />
20' Tilt Single 3,000 lbs<br />
20'<br />
2 Place S<strong>now</strong>mobile<br />
Towbar<br />
Trailer Hitch<br />
Tandem<br />
Welding Single<br />
70 traffic control / trailers / trench shoring 1.866.285.5550
trench shoring<br />
ALUMINUM TRENCH SHIELDS - AEX SERIES / BUILD A BOX SYSTEM<br />
FOR THOSE SMALL OR TIGHT JOBS<br />
Vertical Shores – Features<br />
• Lightweight aluminum alloy construction for both exceptional durability, and easy portability<br />
• Easy to set up<br />
• Can be used with, or without sheeting, according to soil conditions<br />
• Interchangeable components<br />
• <strong>Store</strong>s compactly<br />
• Cylinders feature oversleeve protection and safety bleed-off port<br />
• Molded plastic pump bucket delivers 50% more volume per stroke than a comparable steel pump bucket<br />
• All vertical shores are certified by a registered professional engineer to meet OSHA standards<br />
• Complete manufacturer's tabulated data, and installation/removal procedures are provided<br />
Installation/Removal<br />
Special <strong>tools</strong> (above) enable you to quickly and easily install or remove the vertical shores.<br />
GME ® 2AEX Shields<br />
<strong>The</strong> GME 2AEX ® Shield is an aluminum extruded shield with a slim, 2" wall that comes standard with a tough, T-6 knife edge and rugged top<br />
cap. Massive, extruded end members ensure strength. Available in lengths to 12-feet, it is sized for rubber-tired backhoes, and priced<br />
competitively.<br />
Options<br />
• Standard square-box tubing struts, also for build a box<br />
• End loading struts<br />
• 5" Schedule 80 pipe<br />
• Screw-jack type struts<br />
• Lifting eyes and bridle<br />
• Pullbar<br />
• No-knife edge<br />
• Certified by a registered professional engineer to meet OSHA standards<br />
Standard Features Include Knife Edge and Top Cap!<br />
GME ® Vertical Shores<br />
are designed to prevent cave-ins in all but the most unstable soil conditions, by supporting the side walls of the trench through the use of<br />
hydraulic pressure.<br />
Road Plates<br />
• Sizes from 6' x 6' - 8' x 20'<br />
• All plates come with Lift and Lock system – for lifting in centre.<br />
• Also, each corner has cut out for chain use.<br />
• Each plate is 1" thick<br />
• Weight = width x length x 40.8 = weight of plate<br />
• Liiting chains<br />
Trench Shoring Division 1.866.285.5550 ext.57<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
71
BEDDING BOXES<br />
Confine bedding material to the container, minimizing loss of material.<br />
Light Duty Bedding Boxes<br />
<strong>The</strong> BL4, BL7, and BL9 Light Duty are designed for use with lighter machinery. the top frame is further strengthened by an inner core of<br />
hardwood. It is constructed of 3/16" plate at the ends and sides, and 3/8" plate on the bottom and a 44" profile is standard on these boxes.<br />
Standard Duty Bedding Boxes<br />
BS5, BS7, BS8 and BS9. <strong>The</strong> Standard unit features rugged steel welded construction, fully reinforced at all points of stress. <strong>The</strong> top frame is<br />
further strengthened by an inner core of hardwood. the unit is constucted of 1/4" sides and ends, and the bottom surface is smooth; fabricated<br />
of 1/2" steel plate, with wear strips on the inside to guard against damage by bucket teeth. Low 44" profile allows dump truck to fill the box<br />
from either end or side.<br />
Heavy Duty Bedding Boxes<br />
BH9, BH12, and BH15. <strong>The</strong> BH Heavy Duty box is just <strong>right</strong> for use with heavy machinery. the top frame is further strengthened by an inner core<br />
of hardwood. It is constructed of 3/8" plate at sides and ends and 1/2" plate on the bottom. Wear strips are on the inside bottom and a 44"<br />
profile are standard on the heavy duty box. <strong>The</strong> clean sweep end and corners are reinforced for that extra toughness often required for many<br />
construction needs.<br />
Apparatus "B" Option<br />
<strong>The</strong> Apparatus "B" option, available on all models of the GME ® bedding box, makes repositioning the box easy and quick. It is reinforced and<br />
fully welded at all stress points and gussets have been added for extra strength.<br />
MANHOLE SHIELDS<br />
Available in 4" single and double wall, octagonal and 4-side along with any special size to meet your job requirements. Our MH Series made of<br />
high tensile steel, are heavier and are rated for deeper jobs. <strong>The</strong> square manhole configuration surrounds the pit and provides the needed<br />
inside clearspan while reducing the amount of excavation and restoration required. <strong>The</strong>y assemble in minutes at the jobsite. Standard models<br />
include two walls, two spreader assemblies, eight holding pins and keepers. All are certified by a professional engineer to meet OSHA<br />
standards.<br />
ROUND MANHOLE SHIELDS & STACKERS<br />
Made with corrugated steel for lightweight shoring. Available in 8' and 10' diameters with great depth ratings. Specially designed for personal<br />
protection during manhole installations and repair work. High strength steel walls, welded securely to ridgid steel top and bottom framing.<br />
Optional re<strong>place</strong>able cut-outs allow for handling with rubber-tired backhoes, yet provide maximum protection for workers in the hole.<br />
OCTAGONAL MANHOLE SHIELDS & STACKERS<br />
Trench Shoring Division 1.604.826.1121<br />
trench shoring<br />
72 1.866.285.5550
SLIDE RAIL SYSTEM<br />
WE CAN ASSIST AND INSTALL<br />
• Fast, easy assembly<br />
• Great performance at all depths<br />
• For pits, tank installations, pipeline jobs, and more<br />
• Exact alignment in the trench<br />
• Minimal site restoration required<br />
• Patented open track system lets you swing panels into <strong>place</strong> for safer, easier assembly<br />
• Certified to meet OSHA Requirements<br />
This unique modular system is especially useful when the jobsite is impacted by adjacent structures such as buildings or retaining walls or<br />
when vehicle traffic is adjacent to the excavation. As the system is installed, the machine operator is able to dig deep while keeping soil tight<br />
to the modular panels and rails. this method effectively reduces soil subsidence typical to excavations employing other shoring systems such<br />
as trench shields. Similarly, a contractor can frequently do his work safely and efficiently while allowing vehicle traffic to continue adjacent to<br />
the work site itself.<br />
STEEL TRENCH SHIELDS THAT CAN BE MADE INTO PIT KITS OPEN SQUARE HOLES<br />
CAN BE MADE INTO PIT KITS OPEN SQUARE HOLES<br />
Standard Features (available on 4, 6, 8-inch wall shields)<br />
• Unenpeaded holes<br />
• High tensile steel used throughout<br />
• Stacking tubes, flush to inside<br />
• 4-point lifting system<br />
• Thru-wall collar design<br />
• Equal clearance collar alignment<br />
• Hardwood inserts (top horizontal and end vertical tubes)<br />
• Honey-comb inner structure<br />
• High tensile cutting edge<br />
"Job-Matched" Available Options:<br />
• Foam filler<br />
• We do carry a small selection of knife edge<br />
• Bottom stacking tubes<br />
• Pulling eyes<br />
• Pushing Pads<br />
• Front lowered collars<br />
• Pit kit (4-sided)<br />
• Floating collar set (Boring application)<br />
• Tied spreaders (connected by vertical pieces). Recommmended for spreader widths over 60"<br />
• Height adapter<br />
• Stacking tubes<br />
• Heavy-duty collars (7" O.D., 1" thick)<br />
• Top angle cap<br />
Also have 12' lifting bridals or a 35' lifting bridal for pit kits upp to 12' x 12'.<br />
Trench Shoring Division 1.866.285.5550 ext.57<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
73
welding<br />
ACCESSORIES<br />
• Suitcase Wire Feeder • Tig outfit<br />
• Argon flow Meter • Oxygen/Acetylene cutting outfit<br />
• Carbon Arc Torch – K2/K3 • Electrode ovens<br />
• Welding Helmet • 50' Twin Hose<br />
• Plasma Cutters<br />
ELECTRIC<br />
Model Input Output Weight<br />
Dimension 652 230 Volts 650 A @ 44 volts DC 247 Kg<br />
460 Volts 100% Duty Cycle 545 Lbs<br />
74 1.866.285.5550<br />
575 Volts<br />
Processes: Stick, MIG, TIG, Pulsed MIG, Flux Cored, Gouging, Submerged Arc<br />
Power MIG 300 208 Volt CG/DC 116 Kg<br />
230 Volt 5 - 350 Amp 255 Lbs<br />
460 Volt<br />
575 Volt<br />
1 Phase<br />
60 cycle Processes: MIG, TIG, Pulsed MIG, Flux Cored<br />
SP 135 120 volt 23 - 135 Amp 24 Kg<br />
1 Phase 54 Lbs<br />
60 cycle Processes: MIG, Flux Cored<br />
ENGINE DRIVEN<br />
Model Current Arc Duty Engine Weight<br />
<strong>Cat</strong> Big 40 400 Amp 40 Volt 60% <strong>Cat</strong> 3024 701 Kg<br />
1545 lbs.<br />
Processes: Stick, Mig, Tig, Gouging, Stud, Flux Cored<br />
Bob <strong>Cat</strong> 225 200 Amp 20 Volt 100% Gas 245 Kg<br />
210 Amp 25 Volt 539 lbs.<br />
225 Amp 25 Volt<br />
Processes: Stick, Mig, D.C. Tig<br />
Commander 500 500 Amp 40 Volt 100% Diesel 638 Kg<br />
570 Amp 36 Volt 60% 1406 lbs.<br />
575 Amp 35 Volt 50%<br />
Processes: Stick, Mig,Tig, Flux Cored<br />
Classic 300D 300 Amp 32 Volt 60% Diesel 638 Kg<br />
1406 lbs.<br />
Processes: Stick, Mig, Tig<br />
Classic III 300 DC 34 Volt 50% Gas 638 Kg<br />
1406 lbs.<br />
Processes: Stick, Mig, Tig<br />
Ranger 250 250 AC/DC 25 Volt 100% Gas 259 Kg<br />
250 DC/CC 572 lbs.<br />
250 DC/CV<br />
Skid or trailer mount accessories available.<br />
welding / wrenches & sockets<br />
Processes: Stick, Mig, Tig, Flux Cored
wrenches & sockets<br />
WRENCHES<br />
Type Size<br />
Combination Standard/Metric<br />
Box End Standard/Metric<br />
Adjustable 4" to 24"<br />
Industrial Offset Head /Spud<br />
Standard/Metric<br />
Slugging Standard/Metric<br />
Pipe 3/4" to 6"<br />
Torque 1/4", 1/2", 3/4", 1"<br />
Calibration available at extra charge.<br />
Hydraulic Driven 300 – 6500 ft. lbs.<br />
SOCKETS<br />
Item Measure Type<br />
1/4, 3/8, 1/2, 3/4, 1, 1 1/2, 2" Drive Standard Chrome Sets, Impact<br />
or Metric Sizing or Standard, Deep<br />
RIGHT TOOLS • RIGHT PLACE • RIGHT NOW<br />
75
Invoice Details<br />
Address Header<br />
• <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
location that is<br />
generating your<br />
paperwork.<br />
Customer Billing<br />
Information<br />
• <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> account<br />
number (Customer #)<br />
• Customer Billing Address<br />
• Jobsite Location<br />
Equipment Details<br />
& <strong>Rental</strong> Rates<br />
• QTY – Quantity of<br />
units on rent<br />
• EQUIPMENT # - TCRS<br />
unit number that should<br />
be on the unit you have<br />
• MIN – minimum available<br />
rental rate<br />
• Rate per DAY<br />
• Rate per WEEK<br />
• Rate per 4 (four) WEEKS<br />
Terms & Conditions<br />
• <strong>Rental</strong> Rates “one day =<br />
ten (10) hours”<br />
• Discount rate not always<br />
reflected on contract<br />
• Customers<br />
Responsibilities<br />
• Acceptance or<br />
Declination of <strong>Rental</strong><br />
Equipment Coverage<br />
• Customer Signature<br />
• <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
representative name or<br />
CYCLE BILLING or blank<br />
STORE RENTED FROM<br />
CUSTOMER NUMBER: 00000<br />
BILL TO: YOUR COMPANY<br />
12345 Main street<br />
Anytown, XZ X0Z<br />
JOB SITE: Your Town<br />
CUSTOMER PHONE JOB PHONE<br />
PURCHASE ORDER NUMBER<br />
ORDERED BY<br />
000-000-0000 000-000-0000 AA0000<br />
John @ 000-000-0000<br />
X<br />
DEPOSIT$ DRIVERS LICENSE NUMBER<br />
CUSTOMER SIGNATURE<br />
THE CAT RENTAL STORE<br />
HWY 63 NORTH OF CONFEDERATION<br />
BOX 5632<br />
FT MCMURRAY, AB T9H 3G6<br />
PH: 780-743-5217 FAX: 780-791-1271<br />
G.S.T. # R000000000<br />
SALES REP<br />
Doe, JOHN<br />
CONTRACT TYPE<br />
INVOICED DATE BILLING PERIOD<br />
PLEASE REMIT PAYMENT TO:<br />
TERMS: NET 30 DAYS<br />
76 1.866.285.5550<br />
CONTRACT<br />
INVOICE#<br />
DATE OUT<br />
DATE IN<br />
SHIP TO:<br />
JOB NUMBER<br />
*** THE CAT RENTAL STORE-WIRTANEN ELECTRIC DIVISION has a fleet of<br />
COPY<br />
RENTAL RATES, UNLESS NOTED, APPLY TO ONE TEN (10) HOUR SHIFT OF OPERATION. 1 DAY = 10 HOURS, 1 WEEK = 50<br />
HOURS, 4 WEEKS = 200 HOURS. RENTAL CHARGES ARE BASED ON TIME AND/OR USE. ADDITIONAL USE WILL RESULT IN<br />
ADDITIONAL CHARGES.<br />
CUSTOMER IS RESPONSIBLE FOR * TIRE DAMAGES * REFUELING * REPAIRS<br />
FMC0000000<br />
I HAVE READ AND UNDERSTAND THE CONTRACT TERMS ON BOTH SIDES OF THIS WRITING WHICH CONSTITUTE OUR ENTIRE<br />
AGREEMENT. THERE ARE NO ORAL OR OTHER REPRESENTATIONS INCLUDED HEREIN. I ACKNOWLEDGE RECEIPT OF A COPY<br />
OF THIS CONTRACT.<br />
0000000<br />
4/25/07 8:00 AM<br />
JOB SITE<br />
FORT MCMURRAY, AB T9H<br />
4/24/07 11:31 AM<br />
PAY THIS<br />
AMOUNT<br />
I accept RENTAL EQUIPMENT COVERAGE (REC) I decline RENTAL EQUIPMENT COVERAGE (REC)<br />
RENTAL EQUIPMENT COVERAGE (REC) IS NOT LIABILITY INSURANCE. Customer accepts or declines REC. If the Customer accepts REC,<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> will cover rental equipment damage based on the conditions outlined on the reverse side of this page.<br />
SIGNATURE RAYDON RENTALS LTD.<br />
PAGE<br />
EXPIRATION DATE<br />
<strong>Rental</strong> Out 5/17/07<br />
QTY EQUIPMENT # MIN DAY/EA WEEK/EA 4 WEEK/EA<br />
1 CAT1674 ROLLER RIDE ON 84" CS563C SMTH SGL DRM 909.00 909.00 2726.00<br />
Make: CAT Model: CS563E Ser #: CNG00579<br />
HR OUT: 1843.90<br />
1 4645015 FIRE EXTINGUISHER 20LB W/BRACKET<br />
ALL BILLING INQUIRES<br />
should be directed to your local order desk.<br />
*** EQP MSG ***<br />
**********************************************************************<br />
DURING THE RENTAL TERM - <strong>The</strong> Renter is responsible for routine<br />
maintenance & service of equipment every 250 Hours: __________________<br />
(ON HOUR METERED EQUIPMENT ONLY) Customer Initials<br />
****RENTER IS RESPONSIBLE TO ENSURE THAT: Only properly trained &<br />
& authorized persons shall be permitted to operate this equipment.****<br />
over 7000 rental pieces and is your solution for<br />
TEMPORARY ELECTRICAL POWER-visit www.catrents.ca today!<br />
John Doe<br />
invoice details / credit applications<br />
8177.00<br />
HWY anywhere<br />
BOX 000<br />
FT MCMURRAY, AB T9H 3G6<br />
AMOUNT<br />
General Equipment<br />
Information &<br />
What’s New at<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
Payment Details<br />
• Pay This Amount – payable only when<br />
“CONTRACT TYPE” is INVOICE found in the<br />
customer order detail section.<br />
• Remittance Address<br />
• Terms<br />
<strong>Rental</strong> Contract Details<br />
• Contract Invoice Number<br />
• Date & Time of Equipment pickup or shipping<br />
• Alternate ship to address<br />
• Job number<br />
1<br />
Customer Order Details<br />
• Invoiced Date – date<br />
invoice is created and sent<br />
to customer by TCRS<br />
• Billing Period – Number of<br />
day’s equipment is on rent<br />
*Note: Once the rental rate<br />
reaches the next available rate<br />
(i.e.: 3 days rent = the weekly<br />
rate in this example) your next<br />
billable rental day is after the<br />
week has expired or the 8th<br />
rental day.<br />
• Contract Type<br />
• Quote/Reservation –<br />
Do NOT pay. This document<br />
is a rental or sale<br />
estimate only.<br />
• <strong>Rental</strong> Out – Do NOT<br />
pay, generated at beginning<br />
of rental contract<br />
• <strong>Rental</strong> Return Invoice –<br />
Please pay, this is your<br />
billing and is the invoice<br />
generated when equipment<br />
is returned<br />
• 4 Week Invoice – Please<br />
pay, generated for a<br />
rental period of 4 weeks<br />
• Sale Invoice – Please<br />
pay, any product other<br />
than equipment sales<br />
• Equipment Sale Invoice–<br />
Please pay, equipment<br />
purchase<br />
• Expiration Date<br />
• Quote – rental rate or<br />
sale price good thru date<br />
• <strong>Rental</strong> Out – estimated<br />
equipment return date
���������������<br />
Unit ������������������������������<br />
#300, 11634 142 Street<br />
Edmonton, ������������� AB<br />
T5M �������� 1V4<br />
Phone: ����������������������<br />
(780) 989-1301<br />
Credit Application<br />
���������������<br />
� ������������������������������������<br />
� ������������������������������<br />
� ������������������������������������<br />
� �����������������<br />
Applicant<br />
�����������<br />
_______________________________________________________<br />
�����������<br />
_______________________________________________________<br />
����������������<br />
_________________________________________________<br />
_________________________________________________<br />
City: _____________________________________________<br />
Prov: ______________ Postal Code: ________ ________<br />
��������������<br />
Proprietorship Partnership Corporation<br />
Phone: ______________________________<br />
Cell: ________________________________<br />
Fax: ________________________________<br />
����������������������������������������������<br />
__________________________________________<br />
__________________________________________<br />
City: ______________________________________<br />
Prov: __________ Postal Code: _______ _______<br />
��������������������������������������� __________<br />
�����������������<br />
Owner’s Valid Driver’s License #: _________________________________________________________________<br />
����������������������������� ����������������������������������������������<br />
1.) Last Name: _______________________________ 2.) Last Name: _______________________________<br />
First Name: ___________________ Initial: _____<br />
Home Address:____________________________<br />
City: _____________________ Prov: _________<br />
Postal Code: ______ ______<br />
Position: _____________________________<br />
Length of service: _________ yr<br />
��������������������<br />
Yes<br />
No<br />
If Yes, attach copy of Tax Exempt Certificate<br />
First Name: ___________________ Initial: _____<br />
Home Address:____________________________<br />
City: _____________________ Prov: _________<br />
Postal Code: ______ ______<br />
Position: _____________________________<br />
Length of service: _________ yr<br />
�������������<br />
��������������������������������������������������������������<br />
�<br />
����� ��������������������������������������������������<br />
�<br />
����� ��������������������������������������������������
���������������<br />
Unit ������������������������������<br />
#300, 11634 142 Street<br />
Edmonton, ������������� AB<br />
T5M �������� 1V4<br />
Phone: ����������������������<br />
(780) 989-1301<br />
Credit Application<br />
���������������<br />
� ������������������������������������<br />
� ������������������������������<br />
� ������������������������������������<br />
� �����������������<br />
Credit Information<br />
���������������������� $ _______________________<br />
Purchase Order Required<br />
��������������������<br />
Yes No<br />
Name of Institution: ______________________________________________ Branch # ______________________<br />
Address: ______________________________________________________ Contact: ______________________<br />
Phone: _____________________________ Fax: _____________________<br />
���������������������������������������������������������<br />
��������<br />
�<br />
�����<br />
�<br />
����������� � ����� �����������<br />
�����<br />
�<br />
�������� � ����� �������<br />
�����<br />
�<br />
��������� � ����� �������������<br />
�����<br />
�<br />
��������� � ����� ������������<br />
�����<br />
�<br />
�������������� ����� �����������<br />
�����<br />
�<br />
������������������ ����� �����������������������������<br />
����� ���������������<br />
�����������������<br />
�<br />
�����<br />
�<br />
���������� � ����� ��������<br />
�����<br />
�<br />
������������� ����� ����������������<br />
�����<br />
�<br />
������������� ����� ��������������<br />
�����<br />
�<br />
�������������� ����� ���������<br />
�����<br />
�<br />
��������� � ����� ������������������������<br />
����� �������� � ����� ���������������������<br />
����������������� �����������������������������������������������������������������������������<br />
�������������<br />
1.) Company Name: ____________________________________ Contact Name: ________________________<br />
Address:_________________________________________________________________________________<br />
Phone #: ___________________________________ Fax #: _____________________________________<br />
2.) Company Name: ____________________________________ Contact Name: ________________________<br />
Address:_________________________________________________________________________________<br />
Phone #: ___________________________________ Fax #: _____________________________________<br />
3.) Company Name: ____________________________________ Contact Name: ________________________<br />
Address:_________________________________________________________________________________<br />
Phone #: ___________________________________ Fax #: _____________________________________
���������������<br />
Unit ������������������������������<br />
#300, 11634 142 Street<br />
Edmonton, ������������� AB<br />
T5M �������� 1V4<br />
Phone: ����������������������<br />
(780) 989-1301<br />
Credit Application<br />
���������������<br />
� ������������������������������������<br />
� ������������������������������<br />
� ������������������������������������<br />
� �����������������<br />
Insurance Information<br />
PROOF OF INSURANCE is required for all <strong>Rental</strong> Equipment.<br />
A Certificate of Insurance confirming Property Coverage on Rented Equipment must accompany this application, or a<br />
Letter of Insurance naming <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> as the Loss Payee for specific equipment will be required for each<br />
<strong>Rental</strong> Contract.<br />
INSURANCE AGENT: ______________________________________ Policy #: ______________________________<br />
Telephone #: ____________________ Fax: ____________________ Expiry Date: ___________________________<br />
ALTERNATIVELY<br />
<strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> offers <strong>Rental</strong> Equipment Coverage (REC) on all Rented Equipment.<br />
REC limits your liability for Equipment Damages, based on the terms described on the <strong>Rental</strong> Contract.<br />
REC charges may be waived upon receipt of Proof of Insurance Coverage at the time of the <strong>Rental</strong> Contract.<br />
ACCEPT REC DECLINE REC If Declined, Proof of Insurance must be attached.<br />
Please Initial Please Initial<br />
If Proof of Insurance is not received, REC will be applied automatically to all rental contracts.<br />
AGREEMENT TO TERMS OF CREDIT<br />
I / we hereby verify that the above information is correct. I / we understand and agree to honor the terms on<br />
which <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> grants credit. <strong>The</strong>se terms are as follows:<br />
1.) Equipment rental rates are based on:<br />
One Day equals 10 hours<br />
One Week equals 7 days or 50 hours<br />
One Month equals 4 weeks or 200 hours<br />
2.) <strong>The</strong> Applicant agrees to pay for rentals and merchandise sales in full 30 days from invoice date.<br />
3.) Overdue interest shall be charged on all overdue accounts at a rate of 1.5% per Month (18% per annum). <strong>The</strong> <strong>Cat</strong><br />
<strong>Rental</strong> <strong>Store</strong> may change this rate from time to time without notice.<br />
4.) Cheques should be made payable to <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong><br />
5.) Your signature shall also be your consent to any credit reporting agency, bank, or other service to release information<br />
to <strong>The</strong> <strong>Cat</strong> <strong>Rental</strong> <strong>Store</strong> for purposes of extending a line of credit.<br />
Date: ________________________________ Applicant<br />
�������������<br />
___________________________________________________________ Per: ___________________________<br />
Name - Print Authorized Officer and Title Signature
���������������<br />
Unit ������������������������������<br />
#300, 11634 142 Street<br />
Edmonton, ������������� AB<br />
T5M �������� 1V4<br />
Phone: ����������������������<br />
(780) 989-1301<br />
Credit Application<br />
���������������<br />
� ������������������������������������<br />
� ������������������������������<br />
� ������������������������������������<br />
� �����������������<br />
AIR MILES Reward Program<br />
If your company chooses to participate in the AIR MILES Reward Program, the following terms will apply:<br />
1.) Rewards will apply to rental transactions only<br />
2.) One AIR MILES reward mile is issued for every $25 rental transaction (excluding taxes)<br />
3.) Rewards are only issued to customers when the full invoice is paid within 45 days from issuance.<br />
4.) Rewards are issued to cash and credit card accounts at time of rental return.<br />
Some of our customers are sensitive as to how the benefits of participating in AIR MILES will be applied. To<br />
that extent, we are offering our customers several program participation options:<br />
1.) Accumulate all AIR MILES reward miles in one Collector account, preferably under the name of the owner / president<br />
2.) Accumulate all AIR MILES reward miles in a corporate Collector account<br />
3.) Elect to not collect AIR MILES reward miles<br />
Attached is an AIR MILES reward miles Acceptance Agreement, which we would ask that the president of a senior executive of your<br />
company complete and return to us. In this way, we can ensure to comply with your preferences as to how AIR MILES reward miles,<br />
attributed to your rental transactions with us, are applied.<br />
THE CAT RENTAL STORE - AIR MILES REWARD PROGRAM<br />
Acceptance Agreement<br />
_____________________________ agrees to participate in and accept AIR MILES reward miles.<br />
(company name)<br />
Any rewards should be credited to Collector Number ______________________________.<br />
_____________________________ does not wish to participate in the AIR MILES reward program. No company employees may<br />
(company name)<br />
accept AIR MILES reward miles that may derive from rental transactions.<br />
Signature of signing officer: ________________________________________ Print Name: ___________________________<br />
Title: ______________________________________________ Email Address: ________________________________<br />
(for verification purposes only)<br />
Note: No AIR MILES rewards will be issued without this signed acceptance.<br />
�������������
Vision.<br />
Mission.<br />
Values.<br />
Vision.<br />
Mission.<br />
Values.<br />
Vision Vision ........ Together we we will will lead lead our our industry as as the the<br />
Vision most .......T most .......T trustworthy ogether trustworthy ogether we total we will total will solutions lead solutions lead our our industry provider. industry provider. as as the the<br />
most most trustworthy total total solutions provider.<br />
Mission ...... ...... Quality Employees<br />
Mission ..... ..... Quality Employees<br />
SERVING SERVING<br />
SERVING<br />
Quality Customers<br />
Quality Customers<br />
WITH WITH WITH WITH<br />
Quality Solutions.<br />
Quality Solutions.<br />
Values ....... ....... Integrity…“Be ethical ethical in all in all you you do” do”<br />
• Be • Be honest • Be honest • Be honest and honest and trustworthy and trustworthy and trustworthy<br />
• Be • Be fair, fair, create create win-win solutions<br />
Values ....... ....... Integrity…"Be ethical in all in all you you do" do"<br />
• Be • Be fair, fair, create create win-win solutions<br />
Relationships…“Treat others others as you as you wish wish to be to treated” be treated”<br />
• Communicate • Communicate openly openly • Demonstrate • Demonstrate respect for for others others<br />
• Demonstrate • Demonstrate active active listening • Be • Be encouraging<br />
• Demonstrate • Demonstrate commitment to people to people • Work • Work as as a team a team<br />
Relationships…"Treat others others as as you you wish wish to be to be treated"<br />
• Communicate • Communicate openly openly • Demonstrate • Demonstrate respect for for others others<br />
• Demonstrate • Demonstrate active active listening • Be • Be encouraging<br />
• Demonstrate • Demonstrate commitment to people to people • Work • Work as as a team a team<br />
Success…“Meet or exceed or exceed our our goals” goals”<br />
• Identify, • Identify, celebrate and and reward success<br />
• Be • Be dedicated to safety to safety and and quality quality<br />
• Demonstrate • Demonstrate hard hard work work and and dedication<br />
• Be • Be constantly learning<br />
• Be • Be creative and and innovative<br />
• Demonstrate • Demonstrate a balanced a balanced life life<br />
Success…"Meet or or exceed our our goals" goals"<br />
• Identify, • Identify, celebrate and and reward reward success<br />
• Be • Be dedicated to safety to safety and and quality quality<br />
• Demonstrate • Demonstrate hard hard work work and and dedication<br />
• Be • Be constantly learning<br />
• Be • Be creative and and innovative<br />
• Demonstrate • Demonstrate a balanced a balanced life<br />
life
1-866-285-5550<br />
December 2011 - 10M