Ropes Course Warehouse Catalog 2018

Tools
Felco® Wire Rope
Cutters
• Made from the highest quality
case hardened tool steel,
• Plastic coated handles provide
a firm comfortable grip
• All cutters are tested before
leaving the factory
Item ID Length Max Cut Weight Price
746-C16 23” 16 mm 5 lbs $397.50
746-C112 29” 12 mm 8.25 lbs $539.00
Klein® Havens
Grips
• Pressure of the knurled
jaw is applied to a 1/4’’
(635 mm) cable area
• Larger grips equipped
with latches
No Wrench Ultility Anchors
• No wrench style Helix Anchor Rods
offer moderate holding strength with
good economy, in most soils that don’t
demand high installation torque
• One piece unit with guying eye forged
right onto the shaft to which the helix
is welded
Item ID Helix Shaft Length Weight Price
115-ANC04/0750X54 4” 3/4” 54” 8.82 lbs $28.00
115-ANC06/0750X66 6” 3/4” 66” 11 lbs $33.25
115-ANC08/1000X66 8” 1” 66” 20 lbs $57.95
115-ANC10/1250X96 10” 1-1/4” 96” 42.03 lbs $105.20
Klein® Standard Linemans
Wrench
• Heat treated and forged from bar
steel for long life
• Different sized openings on each
end
• Hole on larger end for turning in
standard pole steps
• Suitable for use on heavy three-bolt
guy clamps with limited clearance
Item ID Size Max Load Latch Weight Price
669-1604-20 1/8-1/2” 5000 lbs No 2.08 lbs $112.60
669-1604-20L 1/8-1/2” 5000 lbs Yes 2.08 lbs $123.40
Irwin® Power Pole Single
Spur Auger Bits 17”
• Single Spur, cutter, and side lip design
bores through creosoted poles without
clogging, binding, or stopping to clear
chips
• Extra-long twist ideal for multiple timber
applications and boring large poles
• Heat treated to guard against bending
when consulting heavy-duty applications
Item ID Size Length Weight Price
661-46811 11/16” 17” 0.81 lbs $29.10
661-46911 11/16” 23” 0.98 lbs $41.25
661-47011 11/16” 29” 1.16 lbs $59.40
661-46813 13/16” 17” 0.91 lbs $32.45
661-47013 13/16” 29” 1.7 lbs $64.25
Mag-Bit® 728 Timber Bits 40”
• Perfect for deep hole or a long reach
• Double flute and double spur design
assure clean holes and quick chip
removal
• Back-tapered to prevent binding in
deep holes
Item ID Length Weight Price
669-3146 13” 2 lbs $77.30
Klein® Linemans Double-Face
Sledge Hammers
• Designed for pole-line work
• Rugged and well-balanced, with the weight to
drive lag bolts
• Forged, tempered-steel head is only 3-3/4’’
(95 mm) long for use in tight areas
• Identical faces with 1-3/4’’ (44 mm) roundcrown
driving surface and beveled edges
Item ID Length Weight Price
669-809-36 14” 2.71 lbs $47.95
Hubbell® Guy Wire
Dead-Ends
• Designed for use on all grades of galvanized
steel wire strand
• Rated for 90% of conductor breaking
strength
• Yoke design enables installation without
a gripping hook
Item ID Size Length Weight Price
676-728.1116 11/16” 40” 1.75 lbs $102.20
Item ID Size Weight Price
747-GDE5202 3/8” 1.26 lbs $43.40
14 Phone: 888.632.8631 Email: cs@ropescoursewarehouse.com
Products and pricing are subject to availability, and may change without notice.